diff mbox series

[RESEND,net-next,06/18] net: phy: marvell: remove the use of .ack_interrupt()

Message ID 20201113165226.561153-7-ciorneiioana@gmail.com (mailing list archive)
State Accepted
Commit 1f6d0f267a1476ae89ddf3cf6b7aab5ec1ead2da
Delegated to: Netdev Maintainers
Headers show
Series net: phy: add support for shared interrupts (part 2) | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count fail Series longer than 15 patches
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 149 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Ioana Ciornei Nov. 13, 2020, 4:52 p.m. UTC 
From: Ioana Ciornei <ioana.ciornei@nxp.com>

In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Cc: Maxim Kochetkov <fido_max@inbox.ru>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
 drivers/net/phy/marvell.c | 31 +++++++++++--------------------
 1 file changed, 11 insertions(+), 20 deletions(-)

Comments

Andrew Lunn Nov. 15, 2020, 8:56 p.m. UTC | #1 
On Fri, Nov 13, 2020 at 06:52:14PM +0200, Ioana Ciornei wrote:
> From: Ioana Ciornei <ioana.ciornei@nxp.com>
> 
> In preparation of removing the .ack_interrupt() callback, we must replace
> its occurrences (aka phy_clear_interrupt), from the 2 places where it is
> called from (phy_enable_interrupts and phy_disable_interrupts), with
> equivalent functionality.
> 
> This means that clearing interrupts now becomes something that the PHY
> driver is responsible of doing, before enabling interrupts and after
> clearing them. Make this driver follow the new contract.
> 
> Cc: Maxim Kochetkov <fido_max@inbox.ru>
> Cc: Baruch Siach <baruch@tkos.co.il>
> Cc: Robert Hancock <robert.hancock@calian.com>
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>

Hi Ioana

I tested this series on a couple of Marvell Ethernet switches with
integrated PHYs using interrupts. Please feel free to add

Tested-by: Andrew Lunn <andrew@lunn.ch>

to this and the previous patch.

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index bb843b960436..587930a7f48b 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -317,12 +317,21 @@  static int marvell_config_intr(struct phy_device *phydev)
 {
 	int err;
 
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = marvell_ack_interrupt(phydev);
+		if (err)
+			return err;
+
 		err = phy_write(phydev, MII_M1011_IMASK,
 				MII_M1011_IMASK_INIT);
-	else
+	} else {
 		err = phy_write(phydev, MII_M1011_IMASK,
 				MII_M1011_IMASK_CLEAR);
+		if (err)
+			return err;
+
+		err = marvell_ack_interrupt(phydev);
+	}
 
 	return err;
 }
@@ -2703,7 +2712,6 @@  static struct phy_driver marvell_drivers[] = {
 		.probe = marvell_probe,
 		.config_init = marvell_config_init,
 		.config_aneg = m88e1101_config_aneg,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -2722,7 +2730,6 @@  static struct phy_driver marvell_drivers[] = {
 		.probe = marvell_probe,
 		.config_init = m88e1111_config_init,
 		.config_aneg = marvell_config_aneg,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -2744,7 +2751,6 @@  static struct phy_driver marvell_drivers[] = {
 		.config_init = m88e1111_config_init,
 		.config_aneg = m88e1111_config_aneg,
 		.read_status = marvell_read_status,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -2766,7 +2772,6 @@  static struct phy_driver marvell_drivers[] = {
 		.config_init = m88e1111_config_init,
 		.config_aneg = m88e1111_config_aneg,
 		.read_status = marvell_read_status,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -2787,7 +2792,6 @@  static struct phy_driver marvell_drivers[] = {
 		.probe = marvell_probe,
 		.config_init = m88e1118_config_init,
 		.config_aneg = m88e1118_config_aneg,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -2807,7 +2811,6 @@  static struct phy_driver marvell_drivers[] = {
 		.config_init = marvell_config_init,
 		.config_aneg = m88e1121_config_aneg,
 		.read_status = marvell_read_status,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -2829,7 +2832,6 @@  static struct phy_driver marvell_drivers[] = {
 		.config_init = m88e1318_config_init,
 		.config_aneg = m88e1318_config_aneg,
 		.read_status = marvell_read_status,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.get_wol = m88e1318_get_wol,
@@ -2851,7 +2853,6 @@  static struct phy_driver marvell_drivers[] = {
 		.config_init = m88e1145_config_init,
 		.config_aneg = m88e1101_config_aneg,
 		.read_status = genphy_read_status,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -2872,7 +2873,6 @@  static struct phy_driver marvell_drivers[] = {
 		.probe = marvell_probe,
 		.config_init = m88e1149_config_init,
 		.config_aneg = m88e1118_config_aneg,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -2891,7 +2891,6 @@  static struct phy_driver marvell_drivers[] = {
 		.probe = marvell_probe,
 		.config_init = m88e1111_config_init,
 		.config_aneg = marvell_config_aneg,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -2909,7 +2908,6 @@  static struct phy_driver marvell_drivers[] = {
 		/* PHY_GBIT_FEATURES */
 		.probe = marvell_probe,
 		.config_init = m88e1116r_config_init,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -2932,7 +2930,6 @@  static struct phy_driver marvell_drivers[] = {
 		.config_init = m88e1510_config_init,
 		.config_aneg = m88e1510_config_aneg,
 		.read_status = marvell_read_status,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.get_wol = m88e1318_get_wol,
@@ -2961,7 +2958,6 @@  static struct phy_driver marvell_drivers[] = {
 		.config_init = marvell_config_init,
 		.config_aneg = m88e1510_config_aneg,
 		.read_status = marvell_read_status,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -2987,7 +2983,6 @@  static struct phy_driver marvell_drivers[] = {
 		.config_init = marvell_config_init,
 		.config_aneg = m88e1510_config_aneg,
 		.read_status = marvell_read_status,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -3012,7 +3007,6 @@  static struct phy_driver marvell_drivers[] = {
 		.config_init = m88e3016_config_init,
 		.aneg_done = marvell_aneg_done,
 		.read_status = marvell_read_status,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -3033,7 +3027,6 @@  static struct phy_driver marvell_drivers[] = {
 		.config_init = marvell_config_init,
 		.config_aneg = m88e6390_config_aneg,
 		.read_status = marvell_read_status,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -3058,7 +3051,6 @@  static struct phy_driver marvell_drivers[] = {
 		.config_init = marvell_config_init,
 		.config_aneg = m88e1510_config_aneg,
 		.read_status = marvell_read_status,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,
@@ -3080,7 +3072,6 @@  static struct phy_driver marvell_drivers[] = {
 		.config_init = marvell_config_init,
 		.config_aneg = m88e1510_config_aneg,
 		.read_status = marvell_read_status,
-		.ack_interrupt = marvell_ack_interrupt,
 		.config_intr = marvell_config_intr,
 		.handle_interrupt = marvell_handle_interrupt,
 		.resume = genphy_resume,