diff mbox series

[net-next,RFC] net: wan: Delete the DLCI / SDLA drivers

Message ID 20201114150921.685594-1-xie.he.0141@gmail.com (mailing list archive)
State Accepted
Commit f73659192b0bdf7bad826587b3530cef43cc048d
Delegated to: Netdev Maintainers
Headers show
Series [net-next,RFC] net: wan: Delete the DLCI / SDLA drivers | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 2 this patch: 1
netdev/kdoc success Errors and warnings before: 7 this patch: 7
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 156 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 1 this patch: 1
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Xie He Nov. 14, 2020, 3:09 p.m. UTC
The DLCI driver (dlci.c) implements the Frame Relay protocol. However,
we already have another newer and better implementation of Frame Relay
provided by the HDLC_FR driver (hdlc_fr.c).

The DLCI driver's implementation of Frame Relay is used by only one
hardware driver in the kernel - the SDLA driver (sdla.c).

The SDLA driver provides Frame Relay support for the Sangoma S50x devices.
However, the vendor provides their own driver (along with their own
multi-WAN-protocol implementations including Frame Relay), called WANPIPE.
I believe most users of the hardware would use the vendor-provided WANPIPE
driver instead.

(The WANPIPE driver was even once in the kernel, but was deleted in
commit 8db60bcf3021 ("[WAN]: Remove broken and unmaintained Sangoma
drivers.") because the vendor no longer updated the in-kernel WANPIPE
driver.)

Cc: Mike McLagan <mike.mclagan@linux.org>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
---
 CREDITS                                 |    9 -
 Documentation/networking/framerelay.rst |   44 -
 MAINTAINERS                             |    6 -
 arch/arm/configs/ixp4xx_defconfig       |    1 -
 arch/mips/configs/gpr_defconfig         |    1 -
 arch/mips/configs/mtx1_defconfig        |    1 -
 drivers/net/wan/Kconfig                 |   45 -
 drivers/net/wan/Makefile                |    2 -
 drivers/net/wan/dlci.c                  |  541 --------
 drivers/net/wan/sdla.c                  | 1655 -----------------------
 include/linux/if_frad.h                 |   92 --
 include/linux/sdla.h                    |  240 ----
 include/uapi/linux/if_frad.h            |  123 --
 include/uapi/linux/sdla.h               |  117 --
 net/socket.c                            |   25 -
 15 files changed, 2902 deletions(-)
 delete mode 100644 Documentation/networking/framerelay.rst
 delete mode 100644 drivers/net/wan/dlci.c
 delete mode 100644 drivers/net/wan/sdla.c
 delete mode 100644 include/linux/if_frad.h
 delete mode 100644 include/linux/sdla.h
 delete mode 100644 include/uapi/linux/if_frad.h
 delete mode 100644 include/uapi/linux/sdla.h

Comments

patchwork-bot+netdevbpf@kernel.org Nov. 17, 2020, 9:40 p.m. UTC | #1
Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Sat, 14 Nov 2020 07:09:21 -0800 you wrote:
> The DLCI driver (dlci.c) implements the Frame Relay protocol. However,
> we already have another newer and better implementation of Frame Relay
> provided by the HDLC_FR driver (hdlc_fr.c).
> 
> The DLCI driver's implementation of Frame Relay is used by only one
> hardware driver in the kernel - the SDLA driver (sdla.c).
> 
> [...]

Here is the summary with links:
  - [net-next,RFC] net: wan: Delete the DLCI / SDLA drivers
    https://git.kernel.org/netdev/net-next/c/f73659192b0b

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/CREDITS b/CREDITS
index 8592e45e3932..67421adb747c 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2499,15 +2499,6 @@  W: http://www.rdrop.com/users/paulmck/
 D: RCU and variants
 D: rcutorture module
 
-N: Mike McLagan
-E: mike.mclagan@linux.org
-W: http://www.invlogic.com/~mmclagan
-D: DLCI/FRAD drivers for Sangoma SDLAs
-S: Innovative Logic Corp
-S: Post Office Box 1068
-S: Laurel, Maryland 20732
-S: USA
-
 N: Bradley McLean
 E: brad@bradpc.gaylord.com
 D: Device driver hacker
diff --git a/Documentation/networking/framerelay.rst b/Documentation/networking/framerelay.rst
deleted file mode 100644
index 6d904399ec6d..000000000000
--- a/Documentation/networking/framerelay.rst
+++ /dev/null
@@ -1,44 +0,0 @@ 
-.. SPDX-License-Identifier: GPL-2.0
-
-================
-Frame Relay (FR)
-================
-
-Frame Relay (FR) support for linux is built into a two tiered system of device
-drivers.  The upper layer implements RFC1490 FR specification, and uses the
-Data Link Connection Identifier (DLCI) as its hardware address.  Usually these
-are assigned by your network supplier, they give you the number/numbers of
-the Virtual Connections (VC) assigned to you.
-
-Each DLCI is a point-to-point link between your machine and a remote one.
-As such, a separate device is needed to accommodate the routing.  Within the
-net-tools archives is 'dlcicfg'.  This program will communicate with the
-base "DLCI" device, and create new net devices named 'dlci00', 'dlci01'...
-The configuration script will ask you how many DLCIs you need, as well as
-how many DLCIs you want to assign to each Frame Relay Access Device (FRAD).
-
-The DLCI uses a number of function calls to communicate with the FRAD, all
-of which are stored in the FRAD's private data area.  assoc/deassoc,
-activate/deactivate and dlci_config.  The DLCI supplies a receive function
-to the FRAD to accept incoming packets.
-
-With this initial offering, only 1 FRAD driver is available.  With many thanks
-to Sangoma Technologies, David Mandelstam & Gene Kozin, the S502A, S502E &
-S508 are supported.  This driver is currently set up for only FR, but as
-Sangoma makes more firmware modules available, it can be updated to provide
-them as well.
-
-Configuration of the FRAD makes use of another net-tools program, 'fradcfg'.
-This program makes use of a configuration file (which dlcicfg can also read)
-to specify the types of boards to be configured as FRADs, as well as perform
-any board specific configuration.  The Sangoma module of fradcfg loads the
-FR firmware into the card, sets the irq/port/memory information, and provides
-an initial configuration.
-
-Additional FRAD device drivers can be added as hardware is available.
-
-At this time, the dlcicfg and fradcfg programs have not been incorporated into
-the net-tools distribution.  They can be found at ftp.invlogic.com, in
-/pub/linux.  Note that with OS/2 FTPD, you end up in /pub by default, so just
-use 'cd linux'.  v0.10 is for use on pre-2.0.3 and earlier, v0.15 is for
-pre-2.0.4 and later.
diff --git a/MAINTAINERS b/MAINTAINERS
index ab8b2c9ad00e..76c24a88e999 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6905,12 +6905,6 @@  S:	Maintained
 W:	http://floatingpoint.sourceforge.net/emulator/index.html
 F:	arch/x86/math-emu/
 
-FRAME RELAY DLCI/FRAD (Sangoma drivers too)
-L:	netdev@vger.kernel.org
-S:	Orphan
-F:	drivers/net/wan/dlci.c
-F:	drivers/net/wan/sdla.c
-
 FRAMEBUFFER LAYER
 M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	dri-devel@lists.freedesktop.org
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 27e7c0714b96..0d6edeb27659 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -141,7 +141,6 @@  CONFIG_HDLC_CISCO=m
 CONFIG_HDLC_FR=m
 CONFIG_HDLC_PPP=m
 CONFIG_HDLC_X25=m
-CONFIG_DLCI=m
 CONFIG_WAN_ROUTER_DRIVERS=m
 CONFIG_ATM_TCP=m
 # CONFIG_INPUT_KEYBOARD is not set
diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
index 599d5604aabe..8a921c8ac233 100644
--- a/arch/mips/configs/gpr_defconfig
+++ b/arch/mips/configs/gpr_defconfig
@@ -228,7 +228,6 @@  CONFIG_FARSYNC=m
 CONFIG_DSCC4=m
 CONFIG_DSCC4_PCISYNC=y
 CONFIG_DSCC4_PCI_RST=y
-CONFIG_DLCI=m
 CONFIG_LAPBETHER=m
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index dc69b054181c..30dacce94198 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -378,7 +378,6 @@  CONFIG_FARSYNC=m
 CONFIG_DSCC4=m
 CONFIG_DSCC4_PCISYNC=y
 CONFIG_DSCC4_PCI_RST=y
-CONFIG_DLCI=m
 CONFIG_LAPBETHER=m
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 2cf98a732a26..4029fde71a9e 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -321,51 +321,6 @@  config IXP4XX_HSS
 	  Say Y here if you want to use built-in HSS ports
 	  on IXP4xx processor.
 
-config DLCI
-	tristate "Frame Relay DLCI support"
-	help
-	  Support for the Frame Relay protocol.
-
-	  Frame Relay is a fast low-cost way to connect to a remote Internet
-	  access provider or to form a private wide area network. The one
-	  physical line from your box to the local "switch" (i.e. the entry
-	  point to the Frame Relay network, usually at the phone company) can
-	  carry several logical point-to-point connections to other computers
-	  connected to the Frame Relay network. For a general explanation of
-	  the protocol, check out <http://www.mplsforum.org/>.
-
-	  To use frame relay, you need supporting hardware (called FRAD) and
-	  certain programs from the net-tools package as explained in
-	  <file:Documentation/networking/framerelay.rst>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dlci.
-
-config DLCI_MAX
-	int "Max DLCI per device"
-	depends on DLCI
-	default "8"
-	help
-	  How many logical point-to-point frame relay connections (the
-	  identifiers of which are called DCLIs) should be handled by each
-	  of your hardware frame relay access devices.
-
-	  Go with the default.
-
-config SDLA
-	tristate "SDLA (Sangoma S502/S508) support"
-	depends on DLCI && ISA
-	help
-	  Driver for the Sangoma S502A, S502E, and S508 Frame Relay Access
-	  Devices.
-
-	  These are multi-protocol cards, but only Frame Relay is supported
-	  by the driver at this time. Please read
-	  <file:Documentation/networking/framerelay.rst>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sdla.
-
 # X.25 network drivers
 config LAPBETHER
 	tristate "LAPB over Ethernet driver"
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 5b9dc85eae34..081666c36ca2 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -21,8 +21,6 @@  obj-$(CONFIG_FARSYNC)		+= farsync.o
 
 obj-$(CONFIG_LANMEDIA)		+= lmc/
 
-obj-$(CONFIG_DLCI)		+= dlci.o 
-obj-$(CONFIG_SDLA)		+= sdla.o
 obj-$(CONFIG_LAPBETHER)		+= lapbether.o
 obj-$(CONFIG_SBNI)		+= sbni.o
 obj-$(CONFIG_N2)		+= n2.o
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
deleted file mode 100644
index 3ca4daf63389..000000000000
--- a/drivers/net/wan/dlci.c
+++ /dev/null
@@ -1,541 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * DLCI		Implementation of Frame Relay protocol for Linux, according to
- *		RFC 1490.  This generic device provides en/decapsulation for an
- *		underlying hardware driver.  Routes & IPs are assigned to these
- *		interfaces.  Requires 'dlcicfg' program to create usable 
- *		interfaces, the initial one, 'dlci' is for IOCTL use only.
- *
- * Version:	@(#)dlci.c	0.35	4 Jan 1997
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *
- *		0.15	Mike Mclagan	Packet freeing, bug in kmalloc call
- *					DLCI_RET handling
- *		0.20	Mike McLagan	More conservative on which packets
- *					are returned for retry and which are
- *					are dropped.  If DLCI_RET_DROP is
- *					returned from the FRAD, the packet is
- *				 	sent back to Linux for re-transmission
- *		0.25	Mike McLagan	Converted to use SIOC IOCTL calls
- *		0.30	Jim Freeman	Fixed to allow IPX traffic
- *		0.35	Michael Elizabeth	Fixed incorrect memcpy_fromfs
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/if_frad.h>
-#include <linux/bitops.h>
-
-#include <net/sock.h>
-
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <linux/uaccess.h>
-
-static const char version[] = "DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org";
-
-static LIST_HEAD(dlci_devs);
-
-static void dlci_setup(struct net_device *);
-
-/* 
- * these encapsulate the RFC 1490 requirements as well as 
- * deal with packet transmission and reception, working with
- * the upper network layers 
- */
-
-static int dlci_header(struct sk_buff *skb, struct net_device *dev, 
-		       unsigned short type, const void *daddr,
-		       const void *saddr, unsigned len)
-{
-	struct frhdr		hdr;
-	unsigned int		hlen;
-	char			*dest;
-
-	hdr.control = FRAD_I_UI;
-	switch (type)
-	{
-		case ETH_P_IP:
-			hdr.IP_NLPID = FRAD_P_IP;
-			hlen = sizeof(hdr.control) + sizeof(hdr.IP_NLPID);
-			break;
-
-		/* feel free to add other types, if necessary */
-
-		default:
-			hdr.pad = FRAD_P_PADDING;
-			hdr.NLPID = FRAD_P_SNAP;
-			memset(hdr.OUI, 0, sizeof(hdr.OUI));
-			hdr.PID = htons(type);
-			hlen = sizeof(hdr);
-			break;
-	}
-
-	dest = skb_push(skb, hlen);
-	if (!dest)
-		return 0;
-
-	memcpy(dest, &hdr, hlen);
-
-	return hlen;
-}
-
-static void dlci_receive(struct sk_buff *skb, struct net_device *dev)
-{
-	struct frhdr		*hdr;
-	int					process, header;
-
-	if (!pskb_may_pull(skb, sizeof(*hdr))) {
-		netdev_notice(dev, "invalid data no header\n");
-		dev->stats.rx_errors++;
-		kfree_skb(skb);
-		return;
-	}
-
-	hdr = (struct frhdr *) skb->data;
-	process = 0;
-	header = 0;
-	skb->dev = dev;
-
-	if (hdr->control != FRAD_I_UI)
-	{
-		netdev_notice(dev, "Invalid header flag 0x%02X\n",
-			      hdr->control);
-		dev->stats.rx_errors++;
-	}
-	else
-		switch (hdr->IP_NLPID)
-		{
-			case FRAD_P_PADDING:
-				if (hdr->NLPID != FRAD_P_SNAP)
-				{
-					netdev_notice(dev, "Unsupported NLPID 0x%02X\n",
-						      hdr->NLPID);
-					dev->stats.rx_errors++;
-					break;
-				}
-	 
-				if (hdr->OUI[0] + hdr->OUI[1] + hdr->OUI[2] != 0)
-				{
-					netdev_notice(dev, "Unsupported organizationally unique identifier 0x%02X-%02X-%02X\n",
-						      hdr->OUI[0],
-						      hdr->OUI[1],
-						      hdr->OUI[2]);
-					dev->stats.rx_errors++;
-					break;
-				}
-
-				/* at this point, it's an EtherType frame */
-				header = sizeof(struct frhdr);
-				/* Already in network order ! */
-				skb->protocol = hdr->PID;
-				process = 1;
-				break;
-
-			case FRAD_P_IP:
-				header = sizeof(hdr->control) + sizeof(hdr->IP_NLPID);
-				skb->protocol = htons(ETH_P_IP);
-				process = 1;
-				break;
-
-			case FRAD_P_SNAP:
-			case FRAD_P_Q933:
-			case FRAD_P_CLNP:
-				netdev_notice(dev, "Unsupported NLPID 0x%02X\n",
-					      hdr->pad);
-				dev->stats.rx_errors++;
-				break;
-
-			default:
-				netdev_notice(dev, "Invalid pad byte 0x%02X\n",
-					      hdr->pad);
-				dev->stats.rx_errors++;
-				break;				
-		}
-
-	if (process)
-	{
-		/* we've set up the protocol, so discard the header */
-		skb_reset_mac_header(skb);
-		skb_pull(skb, header);
-		dev->stats.rx_bytes += skb->len;
-		netif_rx(skb);
-		dev->stats.rx_packets++;
-	}
-	else
-		dev_kfree_skb(skb);
-}
-
-static netdev_tx_t dlci_transmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct dlci_local *dlp = netdev_priv(dev);
-
-	if (skb) {
-		struct netdev_queue *txq = skb_get_tx_queue(dev, skb);
-		netdev_start_xmit(skb, dlp->slave, txq, false);
-	}
-	return NETDEV_TX_OK;
-}
-
-static int dlci_config(struct net_device *dev, struct dlci_conf __user *conf, int get)
-{
-	struct dlci_conf	config;
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	int			err;
-
-	dlp = netdev_priv(dev);
-
-	flp = netdev_priv(dlp->slave);
-
-	if (!get)
-	{
-		if (copy_from_user(&config, conf, sizeof(struct dlci_conf)))
-			return -EFAULT;
-		if (config.flags & ~DLCI_VALID_FLAGS)
-			return -EINVAL;
-		memcpy(&dlp->config, &config, sizeof(struct dlci_conf));
-		dlp->configured = 1;
-	}
-
-	err = (*flp->dlci_conf)(dlp->slave, dev, get);
-	if (err)
-		return err;
-
-	if (get)
-	{
-		if (copy_to_user(conf, &dlp->config, sizeof(struct dlci_conf)))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int dlci_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	struct dlci_local *dlp;
-
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	dlp = netdev_priv(dev);
-
-	switch (cmd)
-	{
-		case DLCI_GET_SLAVE:
-			if (!*(short *)(dev->dev_addr))
-				return -EINVAL;
-
-			strncpy(ifr->ifr_slave, dlp->slave->name, sizeof(ifr->ifr_slave));
-			break;
-
-		case DLCI_GET_CONF:
-		case DLCI_SET_CONF:
-			if (!*(short *)(dev->dev_addr))
-				return -EINVAL;
-
-			return dlci_config(dev, ifr->ifr_data, cmd == DLCI_GET_CONF);
-
-		default: 
-			return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
-static int dlci_change_mtu(struct net_device *dev, int new_mtu)
-{
-	struct dlci_local *dlp = netdev_priv(dev);
-
-	return dev_set_mtu(dlp->slave, new_mtu);
-}
-
-static int dlci_open(struct net_device *dev)
-{
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	int			err;
-
-	dlp = netdev_priv(dev);
-
-	if (!*(short *)(dev->dev_addr))
-		return -EINVAL;
-
-	if (!netif_running(dlp->slave))
-		return -ENOTCONN;
-
-	flp = netdev_priv(dlp->slave);
-	err = (*flp->activate)(dlp->slave, dev);
-	if (err)
-		return err;
-
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-static int dlci_close(struct net_device *dev)
-{
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-
-	netif_stop_queue(dev);
-
-	dlp = netdev_priv(dev);
-
-	flp = netdev_priv(dlp->slave);
-	(*flp->deactivate)(dlp->slave, dev);
-
-	return 0;
-}
-
-static int dlci_add(struct dlci_add *dlci)
-{
-	struct net_device	*master, *slave;
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	int			err = -EINVAL;
-
-
-	/* validate slave device */
-	slave = dev_get_by_name(&init_net, dlci->devname);
-	if (!slave)
-		return -ENODEV;
-
-	if (slave->type != ARPHRD_FRAD || netdev_priv(slave) == NULL)
-		goto err1;
-
-	/* create device name */
-	master = alloc_netdev(sizeof(struct dlci_local), "dlci%d",
-			      NET_NAME_UNKNOWN, dlci_setup);
-	if (!master) {
-		err = -ENOMEM;
-		goto err1;
-	}
-
-	/* make sure same slave not already registered */
-	rtnl_lock();
-	list_for_each_entry(dlp, &dlci_devs, list) {
-		if (dlp->slave == slave) {
-			err = -EBUSY;
-			goto err2;
-		}
-	}
-
-	*(short *)(master->dev_addr) = dlci->dlci;
-
-	dlp = netdev_priv(master);
-	dlp->slave = slave;
-	dlp->master = master;
-
-	flp = netdev_priv(slave);
-	err = (*flp->assoc)(slave, master);
-	if (err < 0)
-		goto err2;
-
-	err = register_netdevice(master);
-	if (err < 0) 
-		goto err2;
-
-	strcpy(dlci->devname, master->name);
-
-	list_add(&dlp->list, &dlci_devs);
-	rtnl_unlock();
-
-	return 0;
-
- err2:
-	rtnl_unlock();
-	free_netdev(master);
- err1:
-	dev_put(slave);
-	return err;
-}
-
-static int dlci_del(struct dlci_add *dlci)
-{
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	struct net_device	*master, *slave;
-	int			err;
-	bool			found = false;
-
-	rtnl_lock();
-
-	/* validate slave device */
-	master = __dev_get_by_name(&init_net, dlci->devname);
-	if (!master) {
-		err = -ENODEV;
-		goto out;
-	}
-
-	list_for_each_entry(dlp, &dlci_devs, list) {
-		if (dlp->master == master) {
-			found = true;
-			break;
-		}
-	}
-	if (!found) {
-		err = -ENODEV;
-		goto out;
-	}
-
-	if (netif_running(master)) {
-		err = -EBUSY;
-		goto out;
-	}
-
-	dlp = netdev_priv(master);
-	slave = dlp->slave;
-	flp = netdev_priv(slave);
-
-	err = (*flp->deassoc)(slave, master);
-	if (!err) {
-		list_del(&dlp->list);
-
-		unregister_netdevice(master);
-
-		dev_put(slave);
-	}
-out:
-	rtnl_unlock();
-	return err;
-}
-
-static int dlci_ioctl(unsigned int cmd, void __user *arg)
-{
-	struct dlci_add add;
-	int err;
-	
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	if (copy_from_user(&add, arg, sizeof(struct dlci_add)))
-		return -EFAULT;
-
-	switch (cmd)
-	{
-		case SIOCADDDLCI:
-			err = dlci_add(&add);
-
-			if (!err)
-				if (copy_to_user(arg, &add, sizeof(struct dlci_add)))
-					return -EFAULT;
-			break;
-
-		case SIOCDELDLCI:
-			err = dlci_del(&add);
-			break;
-
-		default:
-			err = -EINVAL;
-	}
-
-	return err;
-}
-
-static const struct header_ops dlci_header_ops = {
-	.create	= dlci_header,
-};
-
-static const struct net_device_ops dlci_netdev_ops = {
-	.ndo_open	= dlci_open,
-	.ndo_stop	= dlci_close,
-	.ndo_do_ioctl	= dlci_dev_ioctl,
-	.ndo_start_xmit	= dlci_transmit,
-	.ndo_change_mtu	= dlci_change_mtu,
-};
-
-static void dlci_setup(struct net_device *dev)
-{
-	struct dlci_local *dlp = netdev_priv(dev);
-
-	dev->flags		= 0;
-	dev->header_ops		= &dlci_header_ops;
-	dev->netdev_ops		= &dlci_netdev_ops;
-	dev->needs_free_netdev	= true;
-
-	dlp->receive		= dlci_receive;
-
-	dev->type		= ARPHRD_DLCI;
-	dev->hard_header_len	= sizeof(struct frhdr);
-	dev->addr_len		= sizeof(short);
-
-}
-
-/* if slave is unregistering, then cleanup master */
-static int dlci_dev_event(struct notifier_block *unused,
-			  unsigned long event, void *ptr)
-{
-	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-
-	if (dev_net(dev) != &init_net)
-		return NOTIFY_DONE;
-
-	if (event == NETDEV_UNREGISTER) {
-		struct dlci_local *dlp;
-
-		list_for_each_entry(dlp, &dlci_devs, list) {
-			if (dlp->slave == dev) {
-				list_del(&dlp->list);
-				unregister_netdevice(dlp->master);
-				dev_put(dlp->slave);
-				break;
-			}
-		}
-	}
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block dlci_notifier = {
-	.notifier_call = dlci_dev_event,
-};
-
-static int __init init_dlci(void)
-{
-	dlci_ioctl_set(dlci_ioctl);
-	register_netdevice_notifier(&dlci_notifier);
-
-	printk("%s.\n", version);
-
-	return 0;
-}
-
-static void __exit dlci_exit(void)
-{
-	struct dlci_local	*dlp, *nxt;
-	
-	dlci_ioctl_set(NULL);
-	unregister_netdevice_notifier(&dlci_notifier);
-
-	rtnl_lock();
-	list_for_each_entry_safe(dlp, nxt, &dlci_devs, list) {
-		unregister_netdevice(dlp->master);
-		dev_put(dlp->slave);
-	}
-	rtnl_unlock();
-}
-
-module_init(init_dlci);
-module_exit(dlci_exit);
-
-MODULE_AUTHOR("Mike McLagan");
-MODULE_DESCRIPTION("Frame Relay DLCI layer");
-MODULE_LICENSE("GPL");
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
deleted file mode 100644
index bc2c1c7fb1a4..000000000000
--- a/drivers/net/wan/sdla.c
+++ /dev/null
@@ -1,1655 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SDLA		An implementation of a driver for the Sangoma S502/S508 series
- *		multi-protocol PC interface card.  Initial offering is with 
- *		the DLCI driver, providing Frame Relay support for linux.
- *
- *		Global definitions for the Frame relay interface.
- *
- * Version:	@(#)sdla.c   0.30	12 Sep 1996
- *
- * Credits:	Sangoma Technologies, for the use of 2 cards for an extended
- *			period of time.
- *		David Mandelstam <dm@sangoma.com> for getting me started on 
- *			this project, and incentive to complete it.
- *		Gene Kozen <74604.152@compuserve.com> for providing me with
- *			important information about the cards.
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	Improved error handling, packet dropping
- *		0.20	Mike McLagan	New transmit/receive flags for config
- *					If in FR mode, don't accept packets from
- *					non DLCI devices.
- *		0.25	Mike McLagan	Fixed problem with rejecting packets
- *					from non DLCI devices.
- *		0.30	Mike McLagan	Fixed kernel panic when used with modified
- *					ifconfig
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/if_frad.h>
-#include <linux/sdla.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <linux/uaccess.h>
-
-static const char* version = "SDLA driver v0.30, 12 Sep 1996, mike.mclagan@linux.org";
-
-static unsigned int valid_port[] = { 0x250, 0x270, 0x280, 0x300, 0x350, 0x360, 0x380, 0x390};
-
-static unsigned int valid_mem[] = {
-				    0xA0000, 0xA2000, 0xA4000, 0xA6000, 0xA8000, 0xAA000, 0xAC000, 0xAE000, 
-                                    0xB0000, 0xB2000, 0xB4000, 0xB6000, 0xB8000, 0xBA000, 0xBC000, 0xBE000,
-                                    0xC0000, 0xC2000, 0xC4000, 0xC6000, 0xC8000, 0xCA000, 0xCC000, 0xCE000,
-                                    0xD0000, 0xD2000, 0xD4000, 0xD6000, 0xD8000, 0xDA000, 0xDC000, 0xDE000,
-                                    0xE0000, 0xE2000, 0xE4000, 0xE6000, 0xE8000, 0xEA000, 0xEC000, 0xEE000}; 
-
-static DEFINE_SPINLOCK(sdla_lock);
-
-/*********************************************************
- *
- * these are the core routines that access the card itself 
- *
- *********************************************************/
-
-#define SDLA_WINDOW(dev,addr) outb((((addr) >> 13) & 0x1F), (dev)->base_addr + SDLA_REG_Z80_WINDOW)
-
-static void __sdla_read(struct net_device *dev, int addr, void *buf, short len)
-{
-	char          *temp;
-	const void    *base;
-	int           offset, bytes;
-
-	temp = buf;
-	while(len)
-	{	
-		offset = addr & SDLA_ADDR_MASK;
-		bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len;
-		base = (const void *) (dev->mem_start + offset);
-
-		SDLA_WINDOW(dev, addr);
-		memcpy(temp, base, bytes);
-
-		addr += bytes;
-		temp += bytes;
-		len  -= bytes;
-	}  
-}
-
-static void sdla_read(struct net_device *dev, int addr, void *buf, short len)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&sdla_lock, flags);
-	__sdla_read(dev, addr, buf, len);
-	spin_unlock_irqrestore(&sdla_lock, flags);
-}
-
-static void __sdla_write(struct net_device *dev, int addr, 
-			 const void *buf, short len)
-{
-	const char    *temp;
-	void 	      *base;
-	int           offset, bytes;
-
-	temp = buf;
-	while(len)
-	{
-		offset = addr & SDLA_ADDR_MASK;
-		bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len;
-		base = (void *) (dev->mem_start + offset);
-
-		SDLA_WINDOW(dev, addr);
-		memcpy(base, temp, bytes);
-
-		addr += bytes;
-		temp += bytes;
-		len  -= bytes;
-	}
-}
-
-static void sdla_write(struct net_device *dev, int addr, 
-		       const void *buf, short len)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&sdla_lock, flags);
-	__sdla_write(dev, addr, buf, len);
-	spin_unlock_irqrestore(&sdla_lock, flags);
-}
-
-
-static void sdla_clear(struct net_device *dev)
-{
-	unsigned long flags;
-	char          *base;
-	int           len, addr, bytes;
-
-	len = 65536;	
-	addr = 0;
-	bytes = SDLA_WINDOW_SIZE;
-	base = (void *) dev->mem_start;
-
-	spin_lock_irqsave(&sdla_lock, flags);
-	while(len)
-	{
-		SDLA_WINDOW(dev, addr);
-		memset(base, 0, bytes);
-
-		addr += bytes;
-		len  -= bytes;
-	}
-	spin_unlock_irqrestore(&sdla_lock, flags);
-
-}
-
-static char sdla_byte(struct net_device *dev, int addr)
-{
-	unsigned long flags;
-	char          byte, *temp;
-
-	temp = (void *) (dev->mem_start + (addr & SDLA_ADDR_MASK));
-
-	spin_lock_irqsave(&sdla_lock, flags);
-	SDLA_WINDOW(dev, addr);
-	byte = *temp;
-	spin_unlock_irqrestore(&sdla_lock, flags);
-
-	return byte;
-}
-
-static void sdla_stop(struct net_device *dev)
-{
-	struct frad_local *flp;
-
-	flp = netdev_priv(dev);
-	switch(flp->type)
-	{
-		case SDLA_S502A:
-			outb(SDLA_S502A_HALT, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state = SDLA_HALT;
-			break;
-		case SDLA_S502E:
-			outb(SDLA_HALT, dev->base_addr + SDLA_REG_Z80_CONTROL);
-			outb(SDLA_S502E_ENABLE, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state = SDLA_S502E_ENABLE;
-			break;
-		case SDLA_S507:
-			flp->state &= ~SDLA_CPUEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-		case SDLA_S508:
-			flp->state &= ~SDLA_CPUEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-	}
-}
-
-static void sdla_start(struct net_device *dev)
-{
-	struct frad_local *flp;
-
-	flp = netdev_priv(dev);
-	switch(flp->type)
-	{
-		case SDLA_S502A:
-			outb(SDLA_S502A_NMI, dev->base_addr + SDLA_REG_CONTROL);
-			outb(SDLA_S502A_START, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state = SDLA_S502A_START;
-			break;
-		case SDLA_S502E:
-			outb(SDLA_S502E_CPUEN, dev->base_addr + SDLA_REG_Z80_CONTROL);
-			outb(0x00, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state = 0;
-			break;
-		case SDLA_S507:
-			flp->state |= SDLA_CPUEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-		case SDLA_S508:
-			flp->state |= SDLA_CPUEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-	}
-}
-
-/****************************************************
- *
- * this is used for the S502A/E cards to determine
- * the speed of the onboard CPU.  Calibration is
- * necessary for the Frame Relay code uploaded 
- * later.  Incorrect results cause timing problems
- * with link checks & status messages
- *
- ***************************************************/
-
-static int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2)
-{
-	unsigned long start, done, now;
-	char          resp, *temp;
-
-	start = now = jiffies;
-	done = jiffies + jiffs;
-
-	temp = (void *)dev->mem_start;
-	temp += z80_addr & SDLA_ADDR_MASK;
-	
-	resp = ~resp1;
-	while (time_before(jiffies, done) && (resp != resp1) && (!resp2 || (resp != resp2)))
-	{
-		if (jiffies != now)
-		{
-			SDLA_WINDOW(dev, z80_addr);
-			now = jiffies;
-			resp = *temp;
-		}
-	}
-	return time_before(jiffies, done) ? jiffies - start : -1;
-}
-
-/* constants for Z80 CPU speed */
-#define Z80_READY 		'1'	/* Z80 is ready to begin */
-#define LOADER_READY 		'2'	/* driver is ready to begin */
-#define Z80_SCC_OK 		'3'	/* SCC is on board */
-#define Z80_SCC_BAD	 	'4'	/* SCC was not found */
-
-static int sdla_cpuspeed(struct net_device *dev, struct ifreq *ifr)
-{
-	int  jiffs;
-	char data;
-
-	sdla_start(dev);
-	if (sdla_z80_poll(dev, 0, 3*HZ, Z80_READY, 0) < 0)
-		return -EIO;
-
-	data = LOADER_READY;
-	sdla_write(dev, 0, &data, 1);
-
-	if ((jiffs = sdla_z80_poll(dev, 0, 8*HZ, Z80_SCC_OK, Z80_SCC_BAD)) < 0)
-		return -EIO;
-
-	sdla_stop(dev);
-	sdla_read(dev, 0, &data, 1);
-
-	if (data == Z80_SCC_BAD)
-	{
-		printk("%s: SCC bad\n", dev->name);
-		return -EIO;
-	}
-
-	if (data != Z80_SCC_OK)
-		return -EINVAL;
-
-	if (jiffs < 165)
-		ifr->ifr_mtu = SDLA_CPU_16M;
-	else if (jiffs < 220)
-		ifr->ifr_mtu = SDLA_CPU_10M;
-	else if (jiffs < 258)
-		ifr->ifr_mtu = SDLA_CPU_8M;
-	else if (jiffs < 357)
-		ifr->ifr_mtu = SDLA_CPU_7M;
-	else if (jiffs < 467)
-		ifr->ifr_mtu = SDLA_CPU_5M;
-	else
-		ifr->ifr_mtu = SDLA_CPU_3M;
- 
-	return 0;
-}
-
-/************************************************
- *
- *  Direct interaction with the Frame Relay code 
- *  starts here.
- *
- ************************************************/
-
-struct _dlci_stat 
-{
-	short dlci;
-	char  flags;
-} __packed;
-
-struct _frad_stat 
-{
-	char    flags;
-	struct _dlci_stat dlcis[SDLA_MAX_DLCI];
-};
-
-static void sdla_errors(struct net_device *dev, int cmd, int dlci, int ret, int len, void *data) 
-{
-	struct _dlci_stat *pstatus;
-	short             *pdlci;
-	int               i;
-	char              *state, line[30];
-
-	switch (ret)
-	{
-		case SDLA_RET_MODEM:
-			state = data;
-			if (*state & SDLA_MODEM_DCD_LOW)
-				netdev_info(dev, "Modem DCD unexpectedly low!\n");
-			if (*state & SDLA_MODEM_CTS_LOW)
-				netdev_info(dev, "Modem CTS unexpectedly low!\n");
-			/* I should probably do something about this! */
-			break;
-
-		case SDLA_RET_CHANNEL_OFF:
-			netdev_info(dev, "Channel became inoperative!\n");
-			/* same here */
-			break;
-
-		case SDLA_RET_CHANNEL_ON:
-			netdev_info(dev, "Channel became operative!\n");
-			/* same here */
-			break;
-
-		case SDLA_RET_DLCI_STATUS:
-			netdev_info(dev, "Status change reported by Access Node\n");
-			len /= sizeof(struct _dlci_stat);
-			for(pstatus = data, i=0;i < len;i++,pstatus++)
-			{
-				if (pstatus->flags & SDLA_DLCI_NEW)
-					state = "new";
-				else if (pstatus->flags & SDLA_DLCI_DELETED)
-					state = "deleted";
-				else if (pstatus->flags & SDLA_DLCI_ACTIVE)
-					state = "active";
-				else
-				{
-					sprintf(line, "unknown status: %02X", pstatus->flags);
-					state = line;
-				}
-				netdev_info(dev, "DLCI %i: %s\n",
-					    pstatus->dlci, state);
-				/* same here */
-			}
-			break;
-
-		case SDLA_RET_DLCI_UNKNOWN:
-			netdev_info(dev, "Received unknown DLCIs:");
-			len /= sizeof(short);
-			for(pdlci = data,i=0;i < len;i++,pdlci++)
-				pr_cont(" %i", *pdlci);
-			pr_cont("\n");
-			break;
-
-		case SDLA_RET_TIMEOUT:
-			netdev_err(dev, "Command timed out!\n");
-			break;
-
-		case SDLA_RET_BUF_OVERSIZE:
-			netdev_info(dev, "Bc/CIR overflow, acceptable size is %i\n",
-				    len);
-			break;
-
-		case SDLA_RET_BUF_TOO_BIG:
-			netdev_info(dev, "Buffer size over specified max of %i\n",
-				    len);
-			break;
-
-		case SDLA_RET_CHANNEL_INACTIVE:
-		case SDLA_RET_DLCI_INACTIVE:
-		case SDLA_RET_CIR_OVERFLOW:
-		case SDLA_RET_NO_BUFS:
-			if (cmd == SDLA_INFORMATION_WRITE)
-				break;
-			fallthrough;
-
-		default: 
-			netdev_dbg(dev, "Cmd 0x%02X generated return code 0x%02X\n",
-				   cmd, ret);
-			/* Further processing could be done here */
-			break;
-	}
-}
-
-static int sdla_cmd(struct net_device *dev, int cmd, short dlci, short flags, 
-                        void *inbuf, short inlen, void *outbuf, short *outlen)
-{
-	static struct _frad_stat status;
-	struct frad_local        *flp;
-	struct sdla_cmd          *cmd_buf;
-	unsigned long            pflags;
-	unsigned long		 jiffs;
-	int                      ret, waiting, len;
-	long                     window;
-
-	flp = netdev_priv(dev);
-	window = flp->type == SDLA_S508 ? SDLA_508_CMD_BUF : SDLA_502_CMD_BUF;
-	cmd_buf = (struct sdla_cmd *)(dev->mem_start + (window & SDLA_ADDR_MASK));
-	ret = 0;
-	len = 0;
-	jiffs = jiffies + HZ;  /* 1 second is plenty */
-
-	spin_lock_irqsave(&sdla_lock, pflags);
-	SDLA_WINDOW(dev, window);
-	cmd_buf->cmd = cmd;
-	cmd_buf->dlci = dlci;
-	cmd_buf->flags = flags;
-
-	if (inbuf)
-		memcpy(cmd_buf->data, inbuf, inlen);
-
-	cmd_buf->length = inlen;
-
-	cmd_buf->opp_flag = 1;
-	spin_unlock_irqrestore(&sdla_lock, pflags);
-
-	waiting = 1;
-	len = 0;
-	while (waiting && time_before_eq(jiffies, jiffs))
-	{
-		if (waiting++ % 3) 
-		{
-			spin_lock_irqsave(&sdla_lock, pflags);
-			SDLA_WINDOW(dev, window);
-			waiting = ((volatile int)(cmd_buf->opp_flag));
-			spin_unlock_irqrestore(&sdla_lock, pflags);
-		}
-	}
-	
-	if (!waiting)
-	{
-
-		spin_lock_irqsave(&sdla_lock, pflags);
-		SDLA_WINDOW(dev, window);
-		ret = cmd_buf->retval;
-		len = cmd_buf->length;
-		if (outbuf && outlen)
-		{
-			*outlen = *outlen >= len ? len : *outlen;
-
-			if (*outlen)
-				memcpy(outbuf, cmd_buf->data, *outlen);
-		}
-
-		/* This is a local copy that's used for error handling */
-		if (ret)
-			memcpy(&status, cmd_buf->data, len > sizeof(status) ? sizeof(status) : len);
-
-		spin_unlock_irqrestore(&sdla_lock, pflags);
-	}
-	else
-		ret = SDLA_RET_TIMEOUT;
-
-	if (ret != SDLA_RET_OK)
-	   	sdla_errors(dev, cmd, dlci, ret, len, &status);
-
-	return ret;
-}
-
-/***********************************************
- *
- * these functions are called by the DLCI driver 
- *
- ***********************************************/
-
-static int sdla_reconfig(struct net_device *dev);
-
-static int sdla_activate(struct net_device *slave, struct net_device *master)
-{
-	struct frad_local *flp;
-	int i;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->master[i] == master)
-			break;
-
-	if (i == CONFIG_DLCI_MAX)
-		return -ENODEV;
-
-	flp->dlci[i] = abs(flp->dlci[i]);
-
-	if (netif_running(slave) && (flp->config.station == FRAD_STATION_NODE))
-		sdla_cmd(slave, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL);
-
-	return 0;
-}
-
-static int sdla_deactivate(struct net_device *slave, struct net_device *master)
-{
-	struct frad_local *flp;
-	int               i;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->master[i] == master)
-			break;
-
-	if (i == CONFIG_DLCI_MAX)
-		return -ENODEV;
-
-	flp->dlci[i] = -abs(flp->dlci[i]);
-
-	if (netif_running(slave) && (flp->config.station == FRAD_STATION_NODE))
-		sdla_cmd(slave, SDLA_DEACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL);
-
-	return 0;
-}
-
-static int sdla_assoc(struct net_device *slave, struct net_device *master)
-{
-	struct frad_local *flp;
-	int               i;
-
-	if (master->type != ARPHRD_DLCI)
-		return -EINVAL;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-	{
-		if (!flp->master[i])
-			break;
-		if (abs(flp->dlci[i]) == *(short *)(master->dev_addr))
-			return -EADDRINUSE;
-	} 
-
-	if (i == CONFIG_DLCI_MAX)
-		return -EMLINK;  /* #### Alan: Comments on this ?? */
-
-
-	flp->master[i] = master;
-	flp->dlci[i] = -*(short *)(master->dev_addr);
-	master->mtu = slave->mtu;
-
-	if (netif_running(slave)) {
-		if (flp->config.station == FRAD_STATION_CPE)
-			sdla_reconfig(slave);
-		else
-			sdla_cmd(slave, SDLA_ADD_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL);
-	}
-
-	return 0;
-}
-
-static int sdla_deassoc(struct net_device *slave, struct net_device *master)
-{
-	struct frad_local *flp;
-	int               i;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->master[i] == master)
-			break;
-
-	if (i == CONFIG_DLCI_MAX)
-		return -ENODEV;
-
-	flp->master[i] = NULL;
-	flp->dlci[i] = 0;
-
-
-	if (netif_running(slave)) {
-		if (flp->config.station == FRAD_STATION_CPE)
-			sdla_reconfig(slave);
-		else
-			sdla_cmd(slave, SDLA_DELETE_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL);
-	}
-
-	return 0;
-}
-
-static int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get)
-{
-	struct frad_local *flp;
-	struct dlci_local *dlp;
-	int               i;
-	short             len, ret;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->master[i] == master)
-			break;
-
-	if (i == CONFIG_DLCI_MAX)
-		return -ENODEV;
-
-	dlp = netdev_priv(master);
-
-	ret = SDLA_RET_OK;
-	len = sizeof(struct dlci_conf);
-	if (netif_running(slave)) {
-		if (get)
-			ret = sdla_cmd(slave, SDLA_READ_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0,  
-			            NULL, 0, &dlp->config, &len);
-		else
-			ret = sdla_cmd(slave, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0,  
-			            &dlp->config, sizeof(struct dlci_conf) - 4 * sizeof(short), NULL, NULL);
-	}
-
-	return ret == SDLA_RET_OK ? 0 : -EIO;
-}
-
-/**************************
- *
- * now for the Linux driver 
- *
- **************************/
-
-/* NOTE: the DLCI driver deals with freeing the SKB!! */
-static netdev_tx_t sdla_transmit(struct sk_buff *skb,
-				 struct net_device *dev)
-{
-	struct frad_local *flp;
-	int               ret, addr, accept, i;
-	short             size;
-	unsigned long     flags;
-	struct buf_entry  *pbuf;
-
-	flp = netdev_priv(dev);
-	ret = 0;
-	accept = 1;
-
-	netif_stop_queue(dev);
-
-	/*
-	 * stupid GateD insists on setting up the multicast router thru us
-	 * and we're ill equipped to handle a non Frame Relay packet at this
-	 * time!
-	 */
-
-	accept = 1;
-	switch (dev->type)
-	{
-		case ARPHRD_FRAD:
-			if (skb->dev->type != ARPHRD_DLCI)
-			{
-				netdev_warn(dev, "Non DLCI device, type %i, tried to send on FRAD module\n",
-					    skb->dev->type);
-				accept = 0;
-			}
-			break;
-		default:
-			netdev_warn(dev, "unknown firmware type 0x%04X\n",
-				    dev->type);
-			accept = 0;
-			break;
-	}
-	if (accept)
-	{
-		/* this is frame specific, but till there's a PPP module, it's the default */
-		switch (flp->type)
-		{
-			case SDLA_S502A:
-			case SDLA_S502E:
-				ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, skb->data, skb->len, NULL, NULL);
-				break;
-				case SDLA_S508:
-				size = sizeof(addr);
-				ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, NULL, skb->len, &addr, &size);
-				if (ret == SDLA_RET_OK)
-				{
-
-					spin_lock_irqsave(&sdla_lock, flags);
-					SDLA_WINDOW(dev, addr);
-					pbuf = (void *)(dev->mem_start + (addr & SDLA_ADDR_MASK));
-					__sdla_write(dev, pbuf->buf_addr, skb->data, skb->len);
-					SDLA_WINDOW(dev, addr);
-					pbuf->opp_flag = 1;
-					spin_unlock_irqrestore(&sdla_lock, flags);
-				}
-				break;
-		}
-
-		switch (ret)
-		{
-			case SDLA_RET_OK:
-				dev->stats.tx_packets++;
-				break;
-
-			case SDLA_RET_CIR_OVERFLOW:
-			case SDLA_RET_BUF_OVERSIZE:
-			case SDLA_RET_NO_BUFS:
-				dev->stats.tx_dropped++;
-				break;
-
-			default:
-				dev->stats.tx_errors++;
-				break;
-		}
-	}
-	netif_wake_queue(dev);
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-	{
-		if(flp->master[i]!=NULL)
-			netif_wake_queue(flp->master[i]);
-	}		
-
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-static void sdla_receive(struct net_device *dev)
-{
-	struct net_device	  *master;
-	struct frad_local *flp;
-	struct dlci_local *dlp;
-	struct sk_buff	 *skb;
-
-	struct sdla_cmd	*cmd;
-	struct buf_info	*pbufi;
-	struct buf_entry  *pbuf;
-
-	unsigned long	  flags;
-	int               i=0, received, success, addr, buf_base, buf_top;
-	short             dlci, len, len2, split;
-
-	flp = netdev_priv(dev);
-	success = 1;
-	received = addr = buf_top = buf_base = 0;
-	len = dlci = 0;
-	skb = NULL;
-	master = NULL;
-	cmd = NULL;
-	pbufi = NULL;
-	pbuf = NULL;
-
-	spin_lock_irqsave(&sdla_lock, flags);
-
-	switch (flp->type)
-	{
-		case SDLA_S502A:
-		case SDLA_S502E:
-			cmd = (void *) (dev->mem_start + (SDLA_502_RCV_BUF & SDLA_ADDR_MASK));
-			SDLA_WINDOW(dev, SDLA_502_RCV_BUF);
-			success = cmd->opp_flag;
-			if (!success)
-				break;
-
-			dlci = cmd->dlci;
-			len = cmd->length;
-			break;
-
-		case SDLA_S508:
-			pbufi = (void *) (dev->mem_start + (SDLA_508_RXBUF_INFO & SDLA_ADDR_MASK));
-			SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO);
-			pbuf = (void *) (dev->mem_start + ((pbufi->rse_base + flp->buffer * sizeof(struct buf_entry)) & SDLA_ADDR_MASK));
-			success = pbuf->opp_flag;
-			if (!success)
-				break;
-
-			buf_top = pbufi->buf_top;
-			buf_base = pbufi->buf_base;
-			dlci = pbuf->dlci;
-			len = pbuf->length;
-			addr = pbuf->buf_addr;
-			break;
-	}
-
-	/* common code, find the DLCI and get the SKB */
-	if (success)
-	{
-		for (i=0;i<CONFIG_DLCI_MAX;i++)
-			if (flp->dlci[i] == dlci)
-				break;
-
-		if (i == CONFIG_DLCI_MAX)
-		{
-			netdev_notice(dev, "Received packet from invalid DLCI %i, ignoring\n",
-				      dlci);
-			dev->stats.rx_errors++;
-			success = 0;
-		}
-	}
-
-	if (success)
-	{
-		master = flp->master[i];
-		skb = dev_alloc_skb(len + sizeof(struct frhdr));
-		if (skb == NULL) 
-		{
-			netdev_notice(dev, "Memory squeeze, dropping packet\n");
-			dev->stats.rx_dropped++;
-			success = 0;
-		}
-		else
-			skb_reserve(skb, sizeof(struct frhdr));
-	}
-
-	/* pick up the data */
-	switch (flp->type)
-	{
-		case SDLA_S502A:
-		case SDLA_S502E:
-			if (success)
-				__sdla_read(dev, SDLA_502_RCV_BUF + SDLA_502_DATA_OFS, skb_put(skb,len), len);
-
-			SDLA_WINDOW(dev, SDLA_502_RCV_BUF);
-			cmd->opp_flag = 0;
-			break;
-
-		case SDLA_S508:
-			if (success)
-			{
-				/* is this buffer split off the end of the internal ring buffer */
-				split = addr + len > buf_top + 1 ? len - (buf_top - addr + 1) : 0;
-				len2 = len - split;
-
-				__sdla_read(dev, addr, skb_put(skb, len2), len2);
-				if (split)
-					__sdla_read(dev, buf_base, skb_put(skb, split), split);
-			}
-
-			/* increment the buffer we're looking at */
-			SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO);
-			flp->buffer = (flp->buffer + 1) % pbufi->rse_num;
-			pbuf->opp_flag = 0;
-			break;
-	}
-
-	if (success)
-	{
-		dev->stats.rx_packets++;
-		dlp = netdev_priv(master);
-		(*dlp->receive)(skb, master);
-	}
-
-	spin_unlock_irqrestore(&sdla_lock, flags);
-}
-
-static irqreturn_t sdla_isr(int dummy, void *dev_id)
-{
-	struct net_device     *dev;
-	struct frad_local *flp;
-	char              byte;
-
-	dev = dev_id;
-
-	flp = netdev_priv(dev);
-
-	if (!flp->initialized)
-	{
-		netdev_warn(dev, "irq %d for uninitialized device\n", dev->irq);
-		return IRQ_NONE;
-	}
-
-	byte = sdla_byte(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE);
-	switch (byte)
-	{
-		case SDLA_INTR_RX:
-			sdla_receive(dev);
-			break;
-
-		/* the command will get an error return, which is processed above */
-		case SDLA_INTR_MODEM:
-		case SDLA_INTR_STATUS:
-			sdla_cmd(dev, SDLA_READ_DLC_STATUS, 0, 0, NULL, 0, NULL, NULL);
-			break;
-
-		case SDLA_INTR_TX:
-		case SDLA_INTR_COMPLETE:
-		case SDLA_INTR_TIMER:
-			netdev_warn(dev, "invalid irq flag 0x%02X\n", byte);
-			break;
-	}
-
-	/* the S502E requires a manual acknowledgement of the interrupt */ 
-	if (flp->type == SDLA_S502E)
-	{
-		flp->state &= ~SDLA_S502E_INTACK;
-		outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-		flp->state |= SDLA_S502E_INTACK;
-		outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-	}
-
-	/* this clears the byte, informing the Z80 we're done */
-	byte = 0;
-	sdla_write(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte));
-	return IRQ_HANDLED;
-}
-
-static void sdla_poll(struct timer_list *t)
-{
-	struct frad_local *flp = from_timer(flp, t, timer);
-	struct net_device *dev = flp->dev;
-
-	if (sdla_byte(dev, SDLA_502_RCV_BUF))
-		sdla_receive(dev);
-
-	flp->timer.expires = 1;
-	add_timer(&flp->timer);
-}
-
-static int sdla_close(struct net_device *dev)
-{
-	struct frad_local *flp;
-	struct intr_info  intr;
-	int               len, i;
-	short             dlcis[CONFIG_DLCI_MAX];
-
-	flp = netdev_priv(dev);
-
-	len = 0;
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->dlci[i])
-			dlcis[len++] = abs(flp->dlci[i]);
-	len *= 2;
-
-	if (flp->config.station == FRAD_STATION_NODE)
-	{
-		for(i=0;i<CONFIG_DLCI_MAX;i++)
-			if (flp->dlci[i] > 0) 
-				sdla_cmd(dev, SDLA_DEACTIVATE_DLCI, 0, 0, dlcis, len, NULL, NULL);
-		sdla_cmd(dev, SDLA_DELETE_DLCI, 0, 0, &flp->dlci[i], sizeof(flp->dlci[i]), NULL, NULL);
-	}
-
-	memset(&intr, 0, sizeof(intr));
-	/* let's start up the reception */
-	switch(flp->type)
-	{
-		case SDLA_S502A:
-			del_timer(&flp->timer); 
-			break;
-
-		case SDLA_S502E:
-			sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL);
-			flp->state &= ~SDLA_S502E_INTACK;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-
-		case SDLA_S507:
-			break;
-
-		case SDLA_S508:
-			sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL);
-			flp->state &= ~SDLA_S508_INTEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-	}
-
-	sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-
-	netif_stop_queue(dev);
-	
-	return 0;
-}
-
-struct conf_data {
-	struct frad_conf config;
-	short            dlci[CONFIG_DLCI_MAX];
-};
-
-static int sdla_open(struct net_device *dev)
-{
-	struct frad_local *flp;
-	struct dlci_local *dlp;
-	struct conf_data  data;
-	struct intr_info  intr;
-	int               len, i;
-	char              byte;
-
-	flp = netdev_priv(dev);
-
-	if (!flp->initialized)
-		return -EPERM;
-
-	if (!flp->configured)
-		return -EPERM;
-
-	/* time to send in the configuration */
-	len = 0;
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->dlci[i])
-			data.dlci[len++] = abs(flp->dlci[i]);
-	len *= 2;
-
-	memcpy(&data.config, &flp->config, sizeof(struct frad_conf));
-	len += sizeof(struct frad_conf);
-
-	sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-	sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL);
-
-	if (flp->type == SDLA_S508)
-		flp->buffer = 0;
-
-	sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-
-	/* let's start up the reception */
-	memset(&intr, 0, sizeof(intr));
-	switch(flp->type)
-	{
-		case SDLA_S502A:
-			flp->timer.expires = 1;
-			add_timer(&flp->timer);
-			break;
-
-		case SDLA_S502E:
-			flp->state |= SDLA_S502E_ENABLE;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state |= SDLA_S502E_INTACK;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			byte = 0;
-			sdla_write(dev, SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte));
-			intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM;
-			sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL);
-			break;
-
-		case SDLA_S507:
-			break;
-
-		case SDLA_S508:
-			flp->state |= SDLA_S508_INTEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			byte = 0;
-			sdla_write(dev, SDLA_508_IRQ_INTERFACE, &byte, sizeof(byte));
-			intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM;
-			intr.irq = dev->irq;
-			sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL);
-			break;
-	}
-
-	if (flp->config.station == FRAD_STATION_CPE)
-	{
-		byte = SDLA_ICS_STATUS_ENQ;
-		sdla_cmd(dev, SDLA_ISSUE_IN_CHANNEL_SIGNAL, 0, 0, &byte, sizeof(byte), NULL, NULL);
-	}
-	else
-	{
-		sdla_cmd(dev, SDLA_ADD_DLCI, 0, 0, data.dlci, len - sizeof(struct frad_conf), NULL, NULL);
-		for(i=0;i<CONFIG_DLCI_MAX;i++)
-			if (flp->dlci[i] > 0)
-				sdla_cmd(dev, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], 2*sizeof(flp->dlci[i]), NULL, NULL);
-	}
-
-	/* configure any specific DLCI settings */
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->dlci[i])
-		{
-			dlp = netdev_priv(flp->master[i]);
-			if (dlp->configured)
-				sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0, &dlp->config, sizeof(struct dlci_conf), NULL, NULL);
-		}
-
-	netif_start_queue(dev);
-	
-	return 0;
-}
-
-static int sdla_config(struct net_device *dev, struct frad_conf __user *conf, int get)
-{
-	struct frad_local *flp;
-	struct conf_data  data;
-	int               i;
-	short             size;
-
-	if (dev->type == 0xFFFF)
-		return -EUNATCH;
-
-	flp = netdev_priv(dev);
-
-	if (!get)
-	{
-		if (netif_running(dev))
-			return -EBUSY;
-
-		if(copy_from_user(&data.config, conf, sizeof(struct frad_conf)))
-			return -EFAULT;
-
-		if (data.config.station & ~FRAD_STATION_NODE)
-			return -EINVAL;
-
-		if (data.config.flags & ~FRAD_VALID_FLAGS)
-			return -EINVAL;
-
-		if ((data.config.kbaud < 0) || 
-			 ((data.config.kbaud > 128) && (flp->type != SDLA_S508)))
-			return -EINVAL;
-
-		if (data.config.clocking & ~(FRAD_CLOCK_INT | SDLA_S508_PORT_RS232))
-			return -EINVAL;
-
-		if ((data.config.mtu < 0) || (data.config.mtu > SDLA_MAX_MTU))
-			return -EINVAL;
-
-		if ((data.config.T391 < 5) || (data.config.T391 > 30))
-			return -EINVAL;
-
-		if ((data.config.T392 < 5) || (data.config.T392 > 30))
-			return -EINVAL;
-
-		if ((data.config.N391 < 1) || (data.config.N391 > 255))
-			return -EINVAL;
-
-		if ((data.config.N392 < 1) || (data.config.N392 > 10))
-			return -EINVAL;
-
-		if ((data.config.N393 < 1) || (data.config.N393 > 10))
-			return -EINVAL;
-
-		memcpy(&flp->config, &data.config, sizeof(struct frad_conf));
-		flp->config.flags |= SDLA_DIRECT_RECV;
-
-		if (flp->type == SDLA_S508)
-			flp->config.flags |= SDLA_TX70_RX30;
-
-		if (dev->mtu != flp->config.mtu)
-		{
-			/* this is required to change the MTU */
-			dev->mtu = flp->config.mtu;
-			for(i=0;i<CONFIG_DLCI_MAX;i++)
-				if (flp->master[i])
-					flp->master[i]->mtu = flp->config.mtu;
-		}
-
-		flp->config.mtu += sizeof(struct frhdr);
-
-		/* off to the races! */
-		if (!flp->configured)
-			sdla_start(dev);
-
-		flp->configured = 1;
-	}
-	else
-	{
-		/* no sense reading if the CPU isn't started */
-		if (netif_running(dev))
-		{
-			size = sizeof(data);
-			if (sdla_cmd(dev, SDLA_READ_DLCI_CONFIGURATION, 0, 0, NULL, 0, &data, &size) != SDLA_RET_OK)
-				return -EIO;
-		}
-		else
-			if (flp->configured)
-				memcpy(&data.config, &flp->config, sizeof(struct frad_conf));
-			else
-				memset(&data.config, 0, sizeof(struct frad_conf));
-
-		memcpy(&flp->config, &data.config, sizeof(struct frad_conf));
-		data.config.flags &= FRAD_VALID_FLAGS;
-		data.config.mtu -= data.config.mtu > sizeof(struct frhdr) ? sizeof(struct frhdr) : data.config.mtu;
-		return copy_to_user(conf, &data.config, sizeof(struct frad_conf))?-EFAULT:0;
-	}
-
-	return 0;
-}
-
-static int sdla_xfer(struct net_device *dev, struct sdla_mem __user *info, int read)
-{
-	struct sdla_mem mem;
-	char	*temp;
-
-	if(copy_from_user(&mem, info, sizeof(mem)))
-		return -EFAULT;
-		
-	if (read)
-	{	
-		temp = kzalloc(mem.len, GFP_KERNEL);
-		if (!temp)
-			return -ENOMEM;
-		sdla_read(dev, mem.addr, temp, mem.len);
-		if(copy_to_user(mem.data, temp, mem.len))
-		{
-			kfree(temp);
-			return -EFAULT;
-		}
-		kfree(temp);
-	}
-	else
-	{
-		temp = memdup_user(mem.data, mem.len);
-		if (IS_ERR(temp))
-			return PTR_ERR(temp);
-		sdla_write(dev, mem.addr, temp, mem.len);
-		kfree(temp);
-	}
-	return 0;
-}
-
-static int sdla_reconfig(struct net_device *dev)
-{
-	struct frad_local *flp;
-	struct conf_data  data;
-	int               i, len;
-
-	flp = netdev_priv(dev);
-
-	len = 0;
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->dlci[i])
-			data.dlci[len++] = flp->dlci[i];
-	len *= 2;
-
-	memcpy(&data, &flp->config, sizeof(struct frad_conf));
-	len += sizeof(struct frad_conf);
-
-	sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-	sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL);
-	sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-
-	return 0;
-}
-
-static int sdla_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	struct frad_local *flp;
-
-	if(!capable(CAP_NET_ADMIN))
-		return -EPERM;
-		
-	flp = netdev_priv(dev);
-
-	if (!flp->initialized)
-		return -EINVAL;
-
-	switch (cmd)
-	{
-		case FRAD_GET_CONF:
-		case FRAD_SET_CONF:
-			return sdla_config(dev, ifr->ifr_data, cmd == FRAD_GET_CONF);
-
-		case SDLA_IDENTIFY:
-			ifr->ifr_flags = flp->type;
-			break;
-
-		case SDLA_CPUSPEED:
-			return sdla_cpuspeed(dev, ifr);
-
-/* ==========================================================
-NOTE:  This is rather a useless action right now, as the
-       current driver does not support protocols other than
-       FR.  However, Sangoma has modules for a number of
-       other protocols in the works.
-============================================================*/
-		case SDLA_PROTOCOL:
-			if (flp->configured)
-				return -EALREADY;
-
-			switch (ifr->ifr_flags)
-			{
-				case ARPHRD_FRAD:
-					dev->type = ifr->ifr_flags;
-					break;
-				default:
-					return -ENOPROTOOPT;
-			}
-			break;
-
-		case SDLA_CLEARMEM:
-			sdla_clear(dev);
-			break;
-
-		case SDLA_WRITEMEM:
-		case SDLA_READMEM:
-			if(!capable(CAP_SYS_RAWIO))
-				return -EPERM;
-			return sdla_xfer(dev, ifr->ifr_data, cmd == SDLA_READMEM);
-
-		case SDLA_START:
-			sdla_start(dev);
-			break;
-
-		case SDLA_STOP:
-			sdla_stop(dev);
-			break;
-
-		default:
-			return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
-static int sdla_change_mtu(struct net_device *dev, int new_mtu)
-{
-	if (netif_running(dev))
-		return -EBUSY;
-
-	/* for now, you can't change the MTU! */
-	return -EOPNOTSUPP;
-}
-
-static int sdla_set_config(struct net_device *dev, struct ifmap *map)
-{
-	struct frad_local *flp;
-	int               i;
-	char              byte;
-	unsigned base;
-	int err = -EINVAL;
-
-	flp = netdev_priv(dev);
-
-	if (flp->initialized)
-		return -EINVAL;
-
-	for(i=0; i < ARRAY_SIZE(valid_port); i++)
-		if (valid_port[i] == map->base_addr)
-			break;   
-
-	if (i == ARRAY_SIZE(valid_port))
-		return -EINVAL;
-
-	if (!request_region(map->base_addr, SDLA_IO_EXTENTS, dev->name)){
-		pr_warn("io-port 0x%04lx in use\n", dev->base_addr);
-		return -EINVAL;
-	}
-	base = map->base_addr;
-
-	/* test for card types, S502A, S502E, S507, S508                 */
-	/* these tests shut down the card completely, so clear the state */
-	flp->type = SDLA_UNKNOWN;
-	flp->state = 0;
-   
-	for(i=1;i<SDLA_IO_EXTENTS;i++)
-		if (inb(base + i) != 0xFF)
-			break;
-
-	if (i == SDLA_IO_EXTENTS) {   
-		outb(SDLA_HALT, base + SDLA_REG_Z80_CONTROL);
-		if ((inb(base + SDLA_S502_STS) & 0x0F) == 0x08) {
-			outb(SDLA_S502E_INTACK, base + SDLA_REG_CONTROL);
-			if ((inb(base + SDLA_S502_STS) & 0x0F) == 0x0C) {
-				outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-				flp->type = SDLA_S502E;
-				goto got_type;
-			}
-		}
-	}
-
-	for(byte=inb(base),i=0;i<SDLA_IO_EXTENTS;i++)
-		if (inb(base + i) != byte)
-			break;
-
-	if (i == SDLA_IO_EXTENTS) {
-		outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-		if ((inb(base + SDLA_S502_STS) & 0x7E) == 0x30) {
-			outb(SDLA_S507_ENABLE, base + SDLA_REG_CONTROL);
-			if ((inb(base + SDLA_S502_STS) & 0x7E) == 0x32) {
-				outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-				flp->type = SDLA_S507;
-				goto got_type;
-			}
-		}
-	}
-
-	outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-	if ((inb(base + SDLA_S508_STS) & 0x3F) == 0x00) {
-		outb(SDLA_S508_INTEN, base + SDLA_REG_CONTROL);
-		if ((inb(base + SDLA_S508_STS) & 0x3F) == 0x10) {
-			outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-			flp->type = SDLA_S508;
-			goto got_type;
-		}
-	}
-
-	outb(SDLA_S502A_HALT, base + SDLA_REG_CONTROL);
-	if (inb(base + SDLA_S502_STS) == 0x40) {
-		outb(SDLA_S502A_START, base + SDLA_REG_CONTROL);
-		if (inb(base + SDLA_S502_STS) == 0x40) {
-			outb(SDLA_S502A_INTEN, base + SDLA_REG_CONTROL);
-			if (inb(base + SDLA_S502_STS) == 0x44) {
-				outb(SDLA_S502A_START, base + SDLA_REG_CONTROL);
-				flp->type = SDLA_S502A;
-				goto got_type;
-			}
-		}
-	}
-
-	netdev_notice(dev, "Unknown card type\n");
-	err = -ENODEV;
-	goto fail;
-
-got_type:
-	switch(base) {
-		case 0x270:
-		case 0x280:
-		case 0x380: 
-		case 0x390:
-			if (flp->type != SDLA_S508 && flp->type != SDLA_S507)
-				goto fail;
-	}
-
-	switch (map->irq) {
-		case 2:
-			if (flp->type != SDLA_S502E)
-				goto fail;
-			break;
-
-		case 10:
-		case 11:
-		case 12:
-		case 15:
-		case 4:
-			if (flp->type != SDLA_S508 && flp->type != SDLA_S507)
-				goto fail;
-			break;
-		case 3:
-		case 5:
-		case 7:
-			if (flp->type == SDLA_S502A)
-				goto fail;
-			break;
-
-		default:
-			goto fail;
-	}
-
-	err = -EAGAIN;
-	if (request_irq(dev->irq, sdla_isr, 0, dev->name, dev)) 
-		goto fail;
-
-	if (flp->type == SDLA_S507) {
-		switch(dev->irq) {
-			case 3:
-				flp->state = SDLA_S507_IRQ3;
-				break;
-			case 4:
-				flp->state = SDLA_S507_IRQ4;
-				break;
-			case 5:
-				flp->state = SDLA_S507_IRQ5;
-				break;
-			case 7:
-				flp->state = SDLA_S507_IRQ7;
-				break;
-			case 10:
-				flp->state = SDLA_S507_IRQ10;
-				break;
-			case 11:
-				flp->state = SDLA_S507_IRQ11;
-				break;
-			case 12:
-				flp->state = SDLA_S507_IRQ12;
-				break;
-			case 15:
-				flp->state = SDLA_S507_IRQ15;
-				break;
-		}
-	}
-
-	for(i=0; i < ARRAY_SIZE(valid_mem); i++)
-		if (valid_mem[i] == map->mem_start)
-			break;   
-
-	err = -EINVAL;
-	if (i == ARRAY_SIZE(valid_mem))
-		goto fail2;
-
-	if (flp->type == SDLA_S502A && (map->mem_start & 0xF000) >> 12 == 0x0E)
-		goto fail2;
-
-	if (flp->type != SDLA_S507 && map->mem_start >> 16 == 0x0B)
-		goto fail2;
-
-	if (flp->type == SDLA_S507 && map->mem_start >> 16 == 0x0D)
-		goto fail2;
-
-	byte = flp->type != SDLA_S508 ? SDLA_8K_WINDOW : 0;
-	byte |= (map->mem_start & 0xF000) >> (12 + (flp->type == SDLA_S508 ? 1 : 0));
-	switch(flp->type) {
-		case SDLA_S502A:
-		case SDLA_S502E:
-			switch (map->mem_start >> 16) {
-				case 0x0A:
-					byte |= SDLA_S502_SEG_A;
-					break;
-				case 0x0C:
-					byte |= SDLA_S502_SEG_C;
-					break;
-				case 0x0D:
-					byte |= SDLA_S502_SEG_D;
-					break;
-				case 0x0E:
-					byte |= SDLA_S502_SEG_E;
-					break;
-			}
-			break;
-		case SDLA_S507:
-			switch (map->mem_start >> 16) {
-				case 0x0A:
-					byte |= SDLA_S507_SEG_A;
-					break;
-				case 0x0B:
-					byte |= SDLA_S507_SEG_B;
-					break;
-				case 0x0C:
-					byte |= SDLA_S507_SEG_C;
-					break;
-				case 0x0E:
-					byte |= SDLA_S507_SEG_E;
-					break;
-			}
-			break;
-		case SDLA_S508:
-			switch (map->mem_start >> 16) {
-				case 0x0A:
-					byte |= SDLA_S508_SEG_A;
-					break;
-				case 0x0C:
-					byte |= SDLA_S508_SEG_C;
-					break;
-				case 0x0D:
-					byte |= SDLA_S508_SEG_D;
-					break;
-				case 0x0E:
-					byte |= SDLA_S508_SEG_E;
-					break;
-			}
-			break;
-	}
-
-	/* set the memory bits, and enable access */
-	outb(byte, base + SDLA_REG_PC_WINDOW);
-
-	switch(flp->type)
-	{
-		case SDLA_S502E:
-			flp->state = SDLA_S502E_ENABLE;
-			break;
-		case SDLA_S507:
-			flp->state |= SDLA_MEMEN;
-			break;
-		case SDLA_S508:
-			flp->state = SDLA_MEMEN;
-			break;
-	}
-	outb(flp->state, base + SDLA_REG_CONTROL);
-
-	dev->irq = map->irq;
-	dev->base_addr = base;
-	dev->mem_start = map->mem_start;
-	dev->mem_end = dev->mem_start + 0x2000;
-	flp->initialized = 1;
-	return 0;
-
-fail2:
-	free_irq(map->irq, dev);
-fail:
-	release_region(base, SDLA_IO_EXTENTS);
-	return err;
-}
- 
-static const struct net_device_ops sdla_netdev_ops = {
-	.ndo_open	= sdla_open,
-	.ndo_stop	= sdla_close,
-	.ndo_do_ioctl	= sdla_ioctl,
-	.ndo_set_config	= sdla_set_config,
-	.ndo_start_xmit	= sdla_transmit,
-	.ndo_change_mtu	= sdla_change_mtu,
-};
-
-static void setup_sdla(struct net_device *dev)
-{
-	struct frad_local *flp = netdev_priv(dev);
-
-	netdev_boot_setup_check(dev);
-
-	dev->netdev_ops		= &sdla_netdev_ops;
-	dev->flags		= 0;
-	dev->type		= 0xFFFF;
-	dev->hard_header_len	= 0;
-	dev->addr_len		= 0;
-	dev->mtu		= SDLA_MAX_MTU;
-
-	flp->activate		= sdla_activate;
-	flp->deactivate		= sdla_deactivate;
-	flp->assoc		= sdla_assoc;
-	flp->deassoc		= sdla_deassoc;
-	flp->dlci_conf		= sdla_dlci_conf;
-	flp->dev		= dev;
-
-	timer_setup(&flp->timer, sdla_poll, 0);
-	flp->timer.expires	= 1;
-}
-
-static struct net_device *sdla;
-
-static int __init init_sdla(void)
-{
-	int err;
-
-	printk("%s.\n", version);
-
-	sdla = alloc_netdev(sizeof(struct frad_local), "sdla0",
-			    NET_NAME_UNKNOWN, setup_sdla);
-	if (!sdla) 
-		return -ENOMEM;
-
-	err = register_netdev(sdla);
-	if (err) 
-		free_netdev(sdla);
-
-	return err;
-}
-
-static void __exit exit_sdla(void)
-{
-	struct frad_local *flp = netdev_priv(sdla);
-
-	unregister_netdev(sdla);
-	if (flp->initialized) {
-		free_irq(sdla->irq, sdla);
-		release_region(sdla->base_addr, SDLA_IO_EXTENTS);
-	}
-	del_timer_sync(&flp->timer);
-	free_netdev(sdla);
-}
-
-MODULE_LICENSE("GPL");
-
-module_init(init_sdla);
-module_exit(exit_sdla);
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
deleted file mode 100644
index 52224de798aa..000000000000
--- a/include/linux/if_frad.h
+++ /dev/null
@@ -1,92 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
- *		created for each DLCI associated with a FRAD.  The FRAD driver
- *		is not truly a network device, but the lower level device
- *		handler.  This allows other FRAD manufacturers to use the DLCI
- *		code, including its RFC1490 encapsulation alongside the current
- *		implementation for the Sangoma cards.
- *
- * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	changed structure defs (packed)
- *					re-arranged flags
- *					added DLCI_RET vars
- */
-#ifndef _FRAD_H_
-#define _FRAD_H_
-
-#include <uapi/linux/if_frad.h>
-
-
-#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
-
-/* these are the fields of an RFC 1490 header */
-struct frhdr
-{
-   unsigned char  control;
-
-   /* for IP packets, this can be the NLPID */
-   unsigned char  pad;
-
-   unsigned char  NLPID;
-   unsigned char  OUI[3];
-   __be16 PID;
-
-#define IP_NLPID pad 
-} __packed;
-
-/* see RFC 1490 for the definition of the following */
-#define FRAD_I_UI		0x03
-
-#define FRAD_P_PADDING		0x00
-#define FRAD_P_Q933		0x08
-#define FRAD_P_SNAP		0x80
-#define FRAD_P_CLNP		0x81
-#define FRAD_P_IP		0xCC
-
-struct dlci_local
-{
-   struct net_device      *master;
-   struct net_device      *slave;
-   struct dlci_conf       config;
-   int                    configured;
-   struct list_head	  list;
-
-   /* callback function */
-   void              (*receive)(struct sk_buff *skb, struct net_device *);
-};
-
-struct frad_local
-{
-   /* devices which this FRAD is slaved to */
-   struct net_device     *master[CONFIG_DLCI_MAX];
-   short             dlci[CONFIG_DLCI_MAX];
-
-   struct frad_conf  config;
-   int               configured;	/* has this device been configured */
-   int               initialized;	/* mem_start, port, irq set ? */
-
-   /* callback functions */
-   int               (*activate)(struct net_device *, struct net_device *);
-   int               (*deactivate)(struct net_device *, struct net_device *);
-   int               (*assoc)(struct net_device *, struct net_device *);
-   int               (*deassoc)(struct net_device *, struct net_device *);
-   int               (*dlci_conf)(struct net_device *, struct net_device *, int get);
-
-   /* fields that are used by the Sangoma SDLA cards */
-   struct timer_list timer;
-   struct net_device *dev;
-   int               type;		/* adapter type */
-   int               state;		/* state of the S502/8 control latch */
-   int               buffer;		/* current buffer for S508 firmware */
-};
-
-#endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
-
-extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
-
-#endif
diff --git a/include/linux/sdla.h b/include/linux/sdla.h
deleted file mode 100644
index 00e8b3b614f0..000000000000
--- a/include/linux/sdla.h
+++ /dev/null
@@ -1,240 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the Frame relay interface.
- *
- * Version:	@(#)if_ifrad.h	0.20	13 Apr 96
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	Structure packing
- *
- *		0.20	Mike McLagan	New flags for S508 buffer handling
- */
-#ifndef SDLA_H
-#define SDLA_H
-
-#include <uapi/linux/sdla.h>
-
-
-/* important Z80 window addresses */
-#define SDLA_CONTROL_WND		0xE000
-
-#define SDLA_502_CMD_BUF		0xEF60
-#define SDLA_502_RCV_BUF		0xA900
-#define	SDLA_502_TXN_AVAIL		0xFFF1
-#define SDLA_502_RCV_AVAIL		0xFFF2
-#define SDLA_502_EVENT_FLAGS		0xFFF3
-#define SDLA_502_MDM_STATUS		0xFFF4
-#define SDLA_502_IRQ_INTERFACE		0xFFFD
-#define SDLA_502_IRQ_PERMISSION		0xFFFE
-#define SDLA_502_DATA_OFS		0x0010
-
-#define SDLA_508_CMD_BUF		0xE000
-#define SDLA_508_TXBUF_INFO		0xF100
-#define SDLA_508_RXBUF_INFO		0xF120
-#define SDLA_508_EVENT_FLAGS		0xF003
-#define SDLA_508_MDM_STATUS		0xF004
-#define SDLA_508_IRQ_INTERFACE		0xF010
-#define SDLA_508_IRQ_PERMISSION		0xF011
-#define SDLA_508_TSE_OFFSET		0xF012
-
-/* Event flags */
-#define SDLA_EVENT_STATUS		0x01
-#define SDLA_EVENT_DLCI_STATUS		0x02
-#define SDLA_EVENT_BAD_DLCI		0x04
-#define SDLA_EVENT_LINK_DOWN		0x40
-
-/* IRQ Trigger flags */
-#define SDLA_INTR_RX			0x01
-#define SDLA_INTR_TX			0x02
-#define SDLA_INTR_MODEM			0x04
-#define SDLA_INTR_COMPLETE		0x08
-#define SDLA_INTR_STATUS		0x10
-#define SDLA_INTR_TIMER			0x20
-
-/* DLCI status bits */
-#define SDLA_DLCI_DELETED		0x01
-#define SDLA_DLCI_ACTIVE		0x02
-#define SDLA_DLCI_WAITING		0x04
-#define SDLA_DLCI_NEW			0x08
-#define SDLA_DLCI_INCLUDED		0x40
-
-/* valid command codes */
-#define	SDLA_INFORMATION_WRITE		0x01
-#define	SDLA_INFORMATION_READ		0x02
-#define SDLA_ISSUE_IN_CHANNEL_SIGNAL	0x03
-#define	SDLA_SET_DLCI_CONFIGURATION	0x10
-#define	SDLA_READ_DLCI_CONFIGURATION	0x11
-#define	SDLA_DISABLE_COMMUNICATIONS	0x12
-#define	SDLA_ENABLE_COMMUNICATIONS	0x13
-#define	SDLA_READ_DLC_STATUS		0x14
-#define	SDLA_READ_DLC_STATISTICS	0x15
-#define	SDLA_FLUSH_DLC_STATISTICS	0x16
-#define	SDLA_LIST_ACTIVE_DLCI		0x17
-#define	SDLA_FLUSH_INFORMATION_BUFFERS	0x18
-#define	SDLA_ADD_DLCI			0x20
-#define	SDLA_DELETE_DLCI		0x21
-#define	SDLA_ACTIVATE_DLCI		0x22
-#define	SDLA_DEACTIVATE_DLCI		0x23
-#define	SDLA_READ_MODEM_STATUS		0x30
-#define	SDLA_SET_MODEM_STATUS		0x31
-#define	SDLA_READ_COMMS_ERR_STATS	0x32
-#define SDLA_FLUSH_COMMS_ERR_STATS	0x33
-#define	SDLA_READ_CODE_VERSION		0x40
-#define SDLA_SET_IRQ_TRIGGER		0x50
-#define SDLA_GET_IRQ_TRIGGER		0x51
-
-/* In channel signal types */
-#define SDLA_ICS_LINK_VERIFY		0x02
-#define SDLA_ICS_STATUS_ENQ		0x03
-
-/* modem status flags */
-#define SDLA_MODEM_DTR_HIGH		0x01
-#define SDLA_MODEM_RTS_HIGH		0x02
-#define SDLA_MODEM_DCD_HIGH		0x08
-#define SDLA_MODEM_CTS_HIGH		0x20
-
-/* used for RET_MODEM interpretation */
-#define SDLA_MODEM_DCD_LOW		0x01
-#define SDLA_MODEM_CTS_LOW		0x02
-
-/* return codes */
-#define SDLA_RET_OK			0x00
-#define SDLA_RET_COMMUNICATIONS		0x01
-#define SDLA_RET_CHANNEL_INACTIVE	0x02
-#define SDLA_RET_DLCI_INACTIVE		0x03
-#define SDLA_RET_DLCI_CONFIG		0x04
-#define SDLA_RET_BUF_TOO_BIG		0x05
-#define SDLA_RET_NO_DATA		0x05
-#define SDLA_RET_BUF_OVERSIZE		0x06
-#define SDLA_RET_CIR_OVERFLOW		0x07
-#define SDLA_RET_NO_BUFS		0x08
-#define SDLA_RET_TIMEOUT		0x0A
-#define SDLA_RET_MODEM			0x10
-#define SDLA_RET_CHANNEL_OFF		0x11
-#define SDLA_RET_CHANNEL_ON		0x12
-#define SDLA_RET_DLCI_STATUS		0x13
-#define SDLA_RET_DLCI_UNKNOWN       	0x14
-#define SDLA_RET_COMMAND_INVALID    	0x1F
-
-/* Configuration flags */
-#define SDLA_DIRECT_RECV		0x0080
-#define SDLA_TX_NO_EXCEPT		0x0020
-#define SDLA_NO_ICF_MSGS		0x1000
-#define SDLA_TX50_RX50			0x0000
-#define SDLA_TX70_RX30			0x2000
-#define SDLA_TX30_RX70			0x4000
-
-/* IRQ selection flags */
-#define SDLA_IRQ_RECEIVE		0x01
-#define SDLA_IRQ_TRANSMIT		0x02
-#define SDLA_IRQ_MODEM_STAT		0x04
-#define SDLA_IRQ_COMMAND		0x08
-#define SDLA_IRQ_CHANNEL		0x10
-#define SDLA_IRQ_TIMER			0x20
-
-/* definitions for PC memory mapping */
-#define SDLA_8K_WINDOW			0x01
-#define SDLA_S502_SEG_A			0x10
-#define SDLA_S502_SEG_C			0x20
-#define SDLA_S502_SEG_D			0x00
-#define SDLA_S502_SEG_E			0x30
-#define SDLA_S507_SEG_A			0x00
-#define SDLA_S507_SEG_B			0x40
-#define SDLA_S507_SEG_C			0x80
-#define SDLA_S507_SEG_E			0xC0
-#define SDLA_S508_SEG_A			0x00
-#define SDLA_S508_SEG_C			0x10
-#define SDLA_S508_SEG_D			0x08
-#define SDLA_S508_SEG_E			0x18
-
-/* SDLA adapter port constants */
-#define SDLA_IO_EXTENTS			0x04
-	
-#define SDLA_REG_CONTROL		0x00
-#define SDLA_REG_PC_WINDOW		0x01	/* offset for PC window select latch */
-#define SDLA_REG_Z80_WINDOW 		0x02	/* offset for Z80 window select latch */
-#define SDLA_REG_Z80_CONTROL		0x03	/* offset for Z80 control latch */
-	
-#define SDLA_S502_STS			0x00	/* status reg for 502, 502E, 507 */
-#define SDLA_S508_GNRL			0x00	/* general purp. reg for 508 */
-#define SDLA_S508_STS			0x01	/* status reg for 508 */
-#define SDLA_S508_IDR			0x02	/* ID reg for 508 */
-	
-/* control register flags */
-#define SDLA_S502A_START		0x00	/* start the CPU */
-#define SDLA_S502A_INTREQ		0x02
-#define SDLA_S502A_INTEN		0x04
-#define SDLA_S502A_HALT			0x08	/* halt the CPU */	
-#define SDLA_S502A_NMI			0x10	/* issue an NMI to the CPU */
-
-#define SDLA_S502E_CPUEN		0x01
-#define SDLA_S502E_ENABLE		0x02
-#define SDLA_S502E_INTACK		0x04
-	
-#define SDLA_S507_ENABLE		0x01
-#define SDLA_S507_IRQ3			0x00
-#define SDLA_S507_IRQ4			0x20
-#define SDLA_S507_IRQ5			0x40
-#define SDLA_S507_IRQ7			0x60
-#define SDLA_S507_IRQ10			0x80
-#define SDLA_S507_IRQ11			0xA0
-#define SDLA_S507_IRQ12			0xC0
-#define SDLA_S507_IRQ15			0xE0
-	
-#define SDLA_HALT			0x00
-#define SDLA_CPUEN			0x02
-#define SDLA_MEMEN			0x04
-#define SDLA_S507_EPROMWR		0x08
-#define SDLA_S507_EPROMCLK		0x10
-#define SDLA_S508_INTRQ			0x08
-#define SDLA_S508_INTEN			0x10
-
-struct sdla_cmd {
-   char  opp_flag;
-   char  cmd;
-   short length;
-   char  retval;
-   short dlci;
-   char  flags;
-   short rxlost_int;
-   long  rxlost_app;
-   char  reserve[2];
-   char  data[SDLA_MAX_DATA];	/* transfer data buffer */
-} __attribute__((packed));
-
-struct intr_info {
-   char  flags;
-   short txlen;
-   char  irq;
-   char  flags2;
-   short timeout;
-} __attribute__((packed));
-
-/* found in the 508's control window at RXBUF_INFO */
-struct buf_info {
-   unsigned short rse_num;
-   unsigned long  rse_base;
-   unsigned long  rse_next;
-   unsigned long  buf_base;
-   unsigned short reserved;
-   unsigned long  buf_top;
-} __attribute__((packed));
-
-/* structure pointed to by rse_base in RXBUF_INFO struct */
-struct buf_entry {
-   char  opp_flag;
-   short length;
-   short dlci;
-   char  flags;
-   short timestamp;
-   short reserved[2];
-   long  buf_addr;
-} __attribute__((packed));
-
-#endif
diff --git a/include/uapi/linux/if_frad.h b/include/uapi/linux/if_frad.h
deleted file mode 100644
index 3c6ee85f6262..000000000000
--- a/include/uapi/linux/if_frad.h
+++ /dev/null
@@ -1,123 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-/*
- * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
- *		created for each DLCI associated with a FRAD.  The FRAD driver
- *		is not truly a network device, but the lower level device
- *		handler.  This allows other FRAD manufacturers to use the DLCI
- *		code, including its RFC1490 encapsulation alongside the current
- *		implementation for the Sangoma cards.
- *
- * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	changed structure defs (packed)
- *					re-arranged flags
- *					added DLCI_RET vars
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-#ifndef _UAPI_FRAD_H_
-#define _UAPI_FRAD_H_
-
-#include <linux/if.h>
-
-/* Structures and constants associated with the DLCI device driver */
-
-struct dlci_add
-{
-   char  devname[IFNAMSIZ];
-   short dlci;
-};
-
-#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
-#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
-
-/* 
- * These are related to the Sangoma SDLA and should remain in order. 
- * Code within the SDLA module is based on the specifics of this 
- * structure.  Change at your own peril.
- */
-struct dlci_conf {
-   short flags;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-
-/* these are part of the status read */
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-
-/* add any new fields here above is a mirror of sdla_dlci_conf */
-};
-
-#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
-
-/* configuration flags for DLCI */
-#define DLCI_IGNORE_CIR_OUT	0x0001
-#define DLCI_ACCOUNT_CIR_IN	0x0002
-#define DLCI_BUFFER_IF		0x0008
-
-#define DLCI_VALID_FLAGS	0x000B
-
-/* defines for the actual Frame Relay hardware */
-#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
-#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
-
-#define FRAD_LAST_IOCTL	FRAD_SET_CONF
-
-/*
- * Based on the setup for the Sangoma SDLA.  If changes are 
- * necessary to this structure, a routine will need to be 
- * added to that module to copy fields.
- */
-struct frad_conf 
-{
-   short station;
-   short flags;
-   short kbaud;
-   short clocking;
-   short mtu;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-
-/* Add new fields here, above is a mirror of the sdla_conf */
-
-};
-
-#define FRAD_STATION_CPE	0x0000
-#define FRAD_STATION_NODE	0x0001
-
-#define FRAD_TX_IGNORE_CIR	0x0001
-#define FRAD_RX_ACCOUNT_CIR	0x0002
-#define FRAD_DROP_ABORTED	0x0004
-#define FRAD_BUFFERIF		0x0008
-#define FRAD_STATS		0x0010
-#define FRAD_MCI		0x0100
-#define FRAD_AUTODLCI		0x8000
-#define FRAD_VALID_FLAGS	0x811F
-
-#define FRAD_CLOCK_INT		0x0001
-#define FRAD_CLOCK_EXT		0x0000
-
-
-#endif /* _UAPI_FRAD_H_ */
diff --git a/include/uapi/linux/sdla.h b/include/uapi/linux/sdla.h
deleted file mode 100644
index 1e3735be6511..000000000000
--- a/include/uapi/linux/sdla.h
+++ /dev/null
@@ -1,117 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the Frame relay interface.
- *
- * Version:	@(#)if_ifrad.h	0.20	13 Apr 96
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	Structure packing
- *
- *		0.20	Mike McLagan	New flags for S508 buffer handling
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-#ifndef _UAPISDLA_H
-#define _UAPISDLA_H
-
-/* adapter type */
-#define SDLA_TYPES
-#define SDLA_S502A			5020
-#define SDLA_S502E			5021
-#define SDLA_S503			5030
-#define SDLA_S507			5070
-#define SDLA_S508			5080
-#define SDLA_S509			5090
-#define SDLA_UNKNOWN			-1
-
-/* port selection flags for the S508 */
-#define SDLA_S508_PORT_V35		0x00
-#define SDLA_S508_PORT_RS232		0x02
-
-/* Z80 CPU speeds */
-#define SDLA_CPU_3M			0x00
-#define SDLA_CPU_5M			0x01
-#define SDLA_CPU_7M			0x02
-#define SDLA_CPU_8M			0x03
-#define SDLA_CPU_10M			0x04
-#define SDLA_CPU_16M			0x05
-#define SDLA_CPU_12M			0x06
-
-/* some private IOCTLs */
-#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
-#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
-#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
-
-#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
-#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
-#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
-
-struct sdla_mem {
-   int  addr;
-   int  len;
-   void __user *data;
-};
-
-#define SDLA_START			(FRAD_LAST_IOCTL + 7)
-#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
-
-/* some offsets in the Z80's memory space */
-#define SDLA_NMIADDR			0x0000
-#define SDLA_CONF_ADDR			0x0010
-#define SDLA_S502A_NMIADDR		0x0066
-#define SDLA_CODE_BASEADDR		0x0100
-#define SDLA_WINDOW_SIZE		0x2000
-#define SDLA_ADDR_MASK			0x1FFF
-
-/* largest handleable block of data */
-#define SDLA_MAX_DATA			4080
-#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
-#define SDLA_MAX_DLCI			24
-
-/* this should be the same as frad_conf */
-struct sdla_conf {
-   short station;
-   short config;
-   short kbaud;
-   short clocking;
-   short max_frm;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-};
-
-/* this should be the same as dlci_conf */
-struct sdla_dlci_conf {
-   short config;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-};
-
-
-#endif /* _UAPISDLA_H */
diff --git a/net/socket.c b/net/socket.c
index 6e6cccc2104f..152b1dcf93c6 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -64,7 +64,6 @@ 
 #include <linux/seq_file.h>
 #include <linux/mutex.h>
 #include <linux/if_bridge.h>
-#include <linux/if_frad.h>
 #include <linux/if_vlan.h>
 #include <linux/ptp_classify.h>
 #include <linux/init.h>
@@ -1027,17 +1026,6 @@  void vlan_ioctl_set(int (*hook) (struct net *, void __user *))
 }
 EXPORT_SYMBOL(vlan_ioctl_set);
 
-static DEFINE_MUTEX(dlci_ioctl_mutex);
-static int (*dlci_ioctl_hook) (unsigned int, void __user *);
-
-void dlci_ioctl_set(int (*hook) (unsigned int, void __user *))
-{
-	mutex_lock(&dlci_ioctl_mutex);
-	dlci_ioctl_hook = hook;
-	mutex_unlock(&dlci_ioctl_mutex);
-}
-EXPORT_SYMBOL(dlci_ioctl_set);
-
 static long sock_do_ioctl(struct net *net, struct socket *sock,
 			  unsigned int cmd, unsigned long arg)
 {
@@ -1156,17 +1144,6 @@  static long sock_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 				err = vlan_ioctl_hook(net, argp);
 			mutex_unlock(&vlan_ioctl_mutex);
 			break;
-		case SIOCADDDLCI:
-		case SIOCDELDLCI:
-			err = -ENOPKG;
-			if (!dlci_ioctl_hook)
-				request_module("dlci");
-
-			mutex_lock(&dlci_ioctl_mutex);
-			if (dlci_ioctl_hook)
-				err = dlci_ioctl_hook(cmd, argp);
-			mutex_unlock(&dlci_ioctl_mutex);
-			break;
 		case SIOCGSKNS:
 			err = -EPERM;
 			if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
@@ -3427,8 +3404,6 @@  static int compat_sock_ioctl_trans(struct file *file, struct socket *sock,
 	case SIOCBRDELBR:
 	case SIOCGIFVLAN:
 	case SIOCSIFVLAN:
-	case SIOCADDDLCI:
-	case SIOCDELDLCI:
 	case SIOCGSKNS:
 	case SIOCGSTAMP_NEW:
 	case SIOCGSTAMPNS_NEW: