diff mbox series

[bpf-next,v2,01/10] net: introduce preferred busy-polling

Message ID 20201116110416.10719-2-bjorn.topel@gmail.com (mailing list archive)
State Superseded
Delegated to: BPF
Headers show
Series Introduce preferred busy-polling | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for bpf-next
netdev/subject_prefix success Link
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 10852 this patch: 10852
netdev/kdoc success Errors and warnings before: 3 this patch: 3
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: line length of 84 exceeds 80 columns WARNING: line length of 86 exceeds 80 columns WARNING: line length of 87 exceeds 80 columns WARNING: line length of 88 exceeds 80 columns WARNING: line length of 89 exceeds 80 columns WARNING: line length of 91 exceeds 80 columns WARNING: line length of 97 exceeds 80 columns WARNING: line length of 99 exceeds 80 columns
netdev/build_allmodconfig_warn success Errors and warnings before: 20616 this patch: 20616
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Björn Töpel Nov. 16, 2020, 11:04 a.m. UTC
From: Björn Töpel <bjorn.topel@intel.com>

The existing busy-polling mode, enabled by the SO_BUSY_POLL socket
option or system-wide using the /proc/sys/net/core/busy_read knob, is
an opportunistic. That means that if the NAPI context is not
scheduled, it will poll it. If, after busy-polling, the budget is
exceeded the busy-polling logic will schedule the NAPI onto the
regular softirq handling.

One implication of the behavior above is that a busy/heavy loaded NAPI
context will never enter/allow for busy-polling. Some applications
prefer that most NAPI processing would be done by busy-polling.

This series adds a new socket option, SO_PREFER_BUSY_POLL, that works
in concert with the napi_defer_hard_irqs and gro_flush_timeout
knobs. The napi_defer_hard_irqs and gro_flush_timeout knobs were
introduced in commit 6f8b12d661d0 ("net: napi: add hard irqs deferral
feature"), and allows for a user to defer interrupts to be enabled and
instead schedule the NAPI context from a watchdog timer. When a user
enables the SO_PREFER_BUSY_POLL, again with the other knobs enabled,
and the NAPI context is being processed by a softirq, the softirq NAPI
processing will exit early to allow the busy-polling to be performed.

If the application stops performing busy-polling via a system call,
the watchdog timer defined by gro_flush_timeout will timeout, and
regular softirq handling will resume.

In summary; Heavy traffic applications that prefer busy-polling over
softirq processing should use this option.

Example usage:

  $ echo 2 | sudo tee /sys/class/net/ens785f1/napi_defer_hard_irqs
  $ echo 200000 | sudo tee /sys/class/net/ens785f1/gro_flush_timeout

Note that the timeout should be larger than the userspace processing
window, otherwise the watchdog will timeout and fall back to regular
softirq processing.

Enable the SO_BUSY_POLL/SO_PREFER_BUSY_POLL options on your socket.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
---
 arch/alpha/include/uapi/asm/socket.h  |  2 +
 arch/mips/include/uapi/asm/socket.h   |  2 +
 arch/parisc/include/uapi/asm/socket.h |  2 +
 arch/sparc/include/uapi/asm/socket.h  |  2 +
 fs/eventpoll.c                        |  2 +-
 include/linux/netdevice.h             | 35 +++++++-----
 include/net/busy_poll.h               |  5 +-
 include/net/sock.h                    |  4 ++
 include/uapi/asm-generic/socket.h     |  2 +
 net/core/dev.c                        | 78 +++++++++++++++++++++------
 net/core/sock.c                       |  9 ++++
 11 files changed, 111 insertions(+), 32 deletions(-)

Comments

Jakub Kicinski Nov. 16, 2020, 4:04 p.m. UTC | #1
On Mon, 16 Nov 2020 12:04:07 +0100 Björn Töpel wrote:
> @@ -6771,6 +6806,19 @@ static int napi_poll(struct napi_struct *n, struct list_head *repoll)
>  	if (likely(work < weight))
>  		goto out_unlock;
>  
> +	/* The NAPI context has more processing work, but busy-polling
> +	 * is preferred. Exit early.
> +	 */
> +	if (napi_prefer_busy_poll(n)) {
> +		if (napi_complete_done(n, work)) {
> +			/* If timeout is not set, we need to make sure
> +			 * that the NAPI is re-scheduled.
> +			 */
> +			napi_schedule(n);
> +		}
> +		goto out_unlock;
> +	}

Why is this before the disabled check?

>  	/* Drivers must not modify the NAPI state if they
>  	 * consume the entire weight.  In such cases this code
>  	 * still "owns" the NAPI instance and therefore can
Björn Töpel Nov. 16, 2020, 4:19 p.m. UTC | #2
On 2020-11-16 17:04, Jakub Kicinski wrote:
> On Mon, 16 Nov 2020 12:04:07 +0100 Björn Töpel wrote:
>> @@ -6771,6 +6806,19 @@ static int napi_poll(struct napi_struct *n, struct list_head *repoll)
>>   	if (likely(work < weight))
>>   		goto out_unlock;
>>   
>> +	/* The NAPI context has more processing work, but busy-polling
>> +	 * is preferred. Exit early.
>> +	 */
>> +	if (napi_prefer_busy_poll(n)) {
>> +		if (napi_complete_done(n, work)) {
>> +			/* If timeout is not set, we need to make sure
>> +			 * that the NAPI is re-scheduled.
>> +			 */
>> +			napi_schedule(n);
>> +		}
>> +		goto out_unlock;
>> +	}
> 
> Why is this before the disabled check?
>

This path is when the budget was exceeded (more work to be done). If the
prefer flag is set, the napi loop is exited prematurely. We check the
return value for napi_complete_done, to make sure that there is actually
a TO value set.

Uhm, maybe I not following what you mean by the "disabled check".


Björn


>>   	/* Drivers must not modify the NAPI state if they
>>   	 * consume the entire weight.  In such cases this code
>>   	 * still "owns" the NAPI instance and therefore can
Björn Töpel Nov. 16, 2020, 5:28 p.m. UTC | #3
On 2020-11-16 17:19, Björn Töpel wrote:
> On 2020-11-16 17:04, Jakub Kicinski wrote:
>> On Mon, 16 Nov 2020 12:04:07 +0100 Björn Töpel wrote:
>>> @@ -6771,6 +6806,19 @@ static int napi_poll(struct napi_struct *n, 
>>> struct list_head *repoll)
>>>       if (likely(work < weight))
>>>           goto out_unlock;
>>> +    /* The NAPI context has more processing work, but busy-polling
>>> +     * is preferred. Exit early.
>>> +     */
>>> +    if (napi_prefer_busy_poll(n)) {
>>> +        if (napi_complete_done(n, work)) {
>>> +            /* If timeout is not set, we need to make sure
>>> +             * that the NAPI is re-scheduled.
>>> +             */
>>> +            napi_schedule(n);
>>> +        }
>>> +        goto out_unlock;
>>> +    }
>>
>> Why is this before the disabled check?
>>
> 
> This path is when the budget was exceeded (more work to be done). If the
> prefer flag is set, the napi loop is exited prematurely. We check the
> return value for napi_complete_done, to make sure that there is actually
> a TO value set.
> 
> Uhm, maybe I not following what you mean by the "disabled check".
>

Ok, too little coffee.

Yeah, maybe it would make sense to have the disabled check *before* the
"prefer"-checking.


Björn
diff mbox series

Patch

diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h
index de6c4df61082..538359642554 100644
--- a/arch/alpha/include/uapi/asm/socket.h
+++ b/arch/alpha/include/uapi/asm/socket.h
@@ -124,6 +124,8 @@ 
 
 #define SO_DETACH_REUSEPORT_BPF 68
 
+#define SO_PREFER_BUSY_POLL	69
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/mips/include/uapi/asm/socket.h b/arch/mips/include/uapi/asm/socket.h
index d0a9ed2ca2d6..e406e73b5e6e 100644
--- a/arch/mips/include/uapi/asm/socket.h
+++ b/arch/mips/include/uapi/asm/socket.h
@@ -135,6 +135,8 @@ 
 
 #define SO_DETACH_REUSEPORT_BPF 68
 
+#define SO_PREFER_BUSY_POLL	69
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/parisc/include/uapi/asm/socket.h b/arch/parisc/include/uapi/asm/socket.h
index 10173c32195e..1bc46200889d 100644
--- a/arch/parisc/include/uapi/asm/socket.h
+++ b/arch/parisc/include/uapi/asm/socket.h
@@ -116,6 +116,8 @@ 
 
 #define SO_DETACH_REUSEPORT_BPF 0x4042
 
+#define SO_PREFER_BUSY_POLL	0x4043
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/sparc/include/uapi/asm/socket.h b/arch/sparc/include/uapi/asm/socket.h
index 8029b681fc7c..99688cf673a4 100644
--- a/arch/sparc/include/uapi/asm/socket.h
+++ b/arch/sparc/include/uapi/asm/socket.h
@@ -117,6 +117,8 @@ 
 
 #define SO_DETACH_REUSEPORT_BPF  0x0047
 
+#define SO_PREFER_BUSY_POLL	 0x0048
+
 #if !defined(__KERNEL__)
 
 
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 4df61129566d..e11fab3a0b9e 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -397,7 +397,7 @@  static void ep_busy_loop(struct eventpoll *ep, int nonblock)
 	unsigned int napi_id = READ_ONCE(ep->napi_id);
 
 	if ((napi_id >= MIN_NAPI_ID) && net_busy_loop_on())
-		napi_busy_loop(napi_id, nonblock ? NULL : ep_busy_loop_end, ep);
+		napi_busy_loop(napi_id, nonblock ? NULL : ep_busy_loop_end, ep, false);
 }
 
 static inline void ep_reset_busy_poll_napi_id(struct eventpoll *ep)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 7ce648a564f7..52d1cc2bd8a7 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -350,23 +350,25 @@  struct napi_struct {
 };
 
 enum {
-	NAPI_STATE_SCHED,	/* Poll is scheduled */
-	NAPI_STATE_MISSED,	/* reschedule a napi */
-	NAPI_STATE_DISABLE,	/* Disable pending */
-	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
-	NAPI_STATE_LISTED,	/* NAPI added to system lists */
-	NAPI_STATE_NO_BUSY_POLL,/* Do not add in napi_hash, no busy polling */
-	NAPI_STATE_IN_BUSY_POLL,/* sk_busy_loop() owns this NAPI */
+	NAPI_STATE_SCHED,		/* Poll is scheduled */
+	NAPI_STATE_MISSED,		/* reschedule a napi */
+	NAPI_STATE_DISABLE,		/* Disable pending */
+	NAPI_STATE_NPSVC,		/* Netpoll - don't dequeue from poll_list */
+	NAPI_STATE_LISTED,		/* NAPI added to system lists */
+	NAPI_STATE_NO_BUSY_POLL,	/* Do not add in napi_hash, no busy polling */
+	NAPI_STATE_IN_BUSY_POLL,	/* sk_busy_loop() owns this NAPI */
+	NAPI_STATE_PREFER_BUSY_POLL,	/* prefer busy-polling over softirq processing*/
 };
 
 enum {
-	NAPIF_STATE_SCHED	 = BIT(NAPI_STATE_SCHED),
-	NAPIF_STATE_MISSED	 = BIT(NAPI_STATE_MISSED),
-	NAPIF_STATE_DISABLE	 = BIT(NAPI_STATE_DISABLE),
-	NAPIF_STATE_NPSVC	 = BIT(NAPI_STATE_NPSVC),
-	NAPIF_STATE_LISTED	 = BIT(NAPI_STATE_LISTED),
-	NAPIF_STATE_NO_BUSY_POLL = BIT(NAPI_STATE_NO_BUSY_POLL),
-	NAPIF_STATE_IN_BUSY_POLL = BIT(NAPI_STATE_IN_BUSY_POLL),
+	NAPIF_STATE_SCHED		= BIT(NAPI_STATE_SCHED),
+	NAPIF_STATE_MISSED		= BIT(NAPI_STATE_MISSED),
+	NAPIF_STATE_DISABLE		= BIT(NAPI_STATE_DISABLE),
+	NAPIF_STATE_NPSVC		= BIT(NAPI_STATE_NPSVC),
+	NAPIF_STATE_LISTED		= BIT(NAPI_STATE_LISTED),
+	NAPIF_STATE_NO_BUSY_POLL	= BIT(NAPI_STATE_NO_BUSY_POLL),
+	NAPIF_STATE_IN_BUSY_POLL	= BIT(NAPI_STATE_IN_BUSY_POLL),
+	NAPIF_STATE_PREFER_BUSY_POLL	= BIT(NAPI_STATE_PREFER_BUSY_POLL),
 };
 
 enum gro_result {
@@ -437,6 +439,11 @@  static inline bool napi_disable_pending(struct napi_struct *n)
 	return test_bit(NAPI_STATE_DISABLE, &n->state);
 }
 
+static inline bool napi_prefer_busy_poll(struct napi_struct *n)
+{
+	return test_bit(NAPI_STATE_PREFER_BUSY_POLL, &n->state);
+}
+
 bool napi_schedule_prep(struct napi_struct *n);
 
 /**
diff --git a/include/net/busy_poll.h b/include/net/busy_poll.h
index b001fa91c14e..0292b8353d7e 100644
--- a/include/net/busy_poll.h
+++ b/include/net/busy_poll.h
@@ -43,7 +43,7 @@  bool sk_busy_loop_end(void *p, unsigned long start_time);
 
 void napi_busy_loop(unsigned int napi_id,
 		    bool (*loop_end)(void *, unsigned long),
-		    void *loop_end_arg);
+		    void *loop_end_arg, bool prefer_busy_poll);
 
 #else /* CONFIG_NET_RX_BUSY_POLL */
 static inline unsigned long net_busy_loop_on(void)
@@ -105,7 +105,8 @@  static inline void sk_busy_loop(struct sock *sk, int nonblock)
 	unsigned int napi_id = READ_ONCE(sk->sk_napi_id);
 
 	if (napi_id >= MIN_NAPI_ID)
-		napi_busy_loop(napi_id, nonblock ? NULL : sk_busy_loop_end, sk);
+		napi_busy_loop(napi_id, nonblock ? NULL : sk_busy_loop_end, sk,
+			       READ_ONCE(sk->sk_prefer_busy_poll));
 #endif
 }
 
diff --git a/include/net/sock.h b/include/net/sock.h
index a5c6ae78df77..d49b89b071b6 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -301,6 +301,7 @@  struct bpf_local_storage;
   *	@sk_ack_backlog: current listen backlog
   *	@sk_max_ack_backlog: listen backlog set in listen()
   *	@sk_uid: user id of owner
+  *	@sk_prefer_busy_poll: prefer busypolling over softirq processing
   *	@sk_priority: %SO_PRIORITY setting
   *	@sk_type: socket type (%SOCK_STREAM, etc)
   *	@sk_protocol: which protocol this socket belongs in this network family
@@ -479,6 +480,9 @@  struct sock {
 	u32			sk_ack_backlog;
 	u32			sk_max_ack_backlog;
 	kuid_t			sk_uid;
+#ifdef CONFIG_NET_RX_BUSY_POLL
+	u8			sk_prefer_busy_poll;
+#endif
 	struct pid		*sk_peer_pid;
 	const struct cred	*sk_peer_cred;
 	long			sk_rcvtimeo;
diff --git a/include/uapi/asm-generic/socket.h b/include/uapi/asm-generic/socket.h
index 77f7c1638eb1..7dd02408b7ce 100644
--- a/include/uapi/asm-generic/socket.h
+++ b/include/uapi/asm-generic/socket.h
@@ -119,6 +119,8 @@ 
 
 #define SO_DETACH_REUSEPORT_BPF 68
 
+#define SO_PREFER_BUSY_POLL	69
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__))
diff --git a/net/core/dev.c b/net/core/dev.c
index 60d325bda0d7..a08de8cf5efb 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6458,7 +6458,8 @@  bool napi_complete_done(struct napi_struct *n, int work_done)
 
 		WARN_ON_ONCE(!(val & NAPIF_STATE_SCHED));
 
-		new = val & ~(NAPIF_STATE_MISSED | NAPIF_STATE_SCHED);
+		new = val & ~(NAPIF_STATE_MISSED | NAPIF_STATE_SCHED |
+			      NAPIF_STATE_PREFER_BUSY_POLL);
 
 		/* If STATE_MISSED was set, leave STATE_SCHED set,
 		 * because we will call napi->poll() one more time.
@@ -6497,8 +6498,29 @@  static struct napi_struct *napi_by_id(unsigned int napi_id)
 
 #define BUSY_POLL_BUDGET 8
 
-static void busy_poll_stop(struct napi_struct *napi, void *have_poll_lock)
+static void __busy_poll_stop(struct napi_struct *napi, bool skip_schedule)
 {
+	if (!skip_schedule) {
+		gro_normal_list(napi);
+		__napi_schedule(napi);
+		return;
+	}
+
+	if (napi->gro_bitmask) {
+		/* flush too old packets
+		 * If HZ < 1000, flush all packets.
+		 */
+		napi_gro_flush(napi, HZ >= 1000);
+	}
+
+	gro_normal_list(napi);
+	clear_bit(NAPI_STATE_SCHED, &napi->state);
+}
+
+static void busy_poll_stop(struct napi_struct *napi, void *have_poll_lock, bool prefer_busy_poll)
+{
+	bool skip_schedule = false;
+	unsigned long timeout;
 	int rc;
 
 	/* Busy polling means there is a high chance device driver hard irq
@@ -6515,6 +6537,15 @@  static void busy_poll_stop(struct napi_struct *napi, void *have_poll_lock)
 
 	local_bh_disable();
 
+	if (prefer_busy_poll) {
+		napi->defer_hard_irqs_count = READ_ONCE(napi->dev->napi_defer_hard_irqs);
+		timeout = READ_ONCE(napi->dev->gro_flush_timeout);
+		if (napi->defer_hard_irqs_count && timeout) {
+			hrtimer_start(&napi->timer, ns_to_ktime(timeout), HRTIMER_MODE_REL_PINNED);
+			skip_schedule = true;
+		}
+	}
+
 	/* All we really want here is to re-enable device interrupts.
 	 * Ideally, a new ndo_busy_poll_stop() could avoid another round.
 	 */
@@ -6525,19 +6556,14 @@  static void busy_poll_stop(struct napi_struct *napi, void *have_poll_lock)
 	 */
 	trace_napi_poll(napi, rc, BUSY_POLL_BUDGET);
 	netpoll_poll_unlock(have_poll_lock);
-	if (rc == BUSY_POLL_BUDGET) {
-		/* As the whole budget was spent, we still own the napi so can
-		 * safely handle the rx_list.
-		 */
-		gro_normal_list(napi);
-		__napi_schedule(napi);
-	}
+	if (rc == BUSY_POLL_BUDGET)
+		__busy_poll_stop(napi, skip_schedule);
 	local_bh_enable();
 }
 
 void napi_busy_loop(unsigned int napi_id,
 		    bool (*loop_end)(void *, unsigned long),
-		    void *loop_end_arg)
+		    void *loop_end_arg, bool prefer_busy_poll)
 {
 	unsigned long start_time = loop_end ? busy_loop_current_time() : 0;
 	int (*napi_poll)(struct napi_struct *napi, int budget);
@@ -6565,12 +6591,18 @@  void napi_busy_loop(unsigned int napi_id,
 			 * we avoid dirtying napi->state as much as we can.
 			 */
 			if (val & (NAPIF_STATE_DISABLE | NAPIF_STATE_SCHED |
-				   NAPIF_STATE_IN_BUSY_POLL))
+				   NAPIF_STATE_IN_BUSY_POLL)) {
+				if (prefer_busy_poll)
+					set_bit(NAPI_STATE_PREFER_BUSY_POLL, &napi->state);
 				goto count;
+			}
 			if (cmpxchg(&napi->state, val,
 				    val | NAPIF_STATE_IN_BUSY_POLL |
-					  NAPIF_STATE_SCHED) != val)
+					  NAPIF_STATE_SCHED) != val) {
+				if (prefer_busy_poll)
+					set_bit(NAPI_STATE_PREFER_BUSY_POLL, &napi->state);
 				goto count;
+			}
 			have_poll_lock = netpoll_poll_lock(napi);
 			napi_poll = napi->poll;
 		}
@@ -6588,7 +6620,7 @@  void napi_busy_loop(unsigned int napi_id,
 
 		if (unlikely(need_resched())) {
 			if (napi_poll)
-				busy_poll_stop(napi, have_poll_lock);
+				busy_poll_stop(napi, have_poll_lock, prefer_busy_poll);
 			preempt_enable();
 			rcu_read_unlock();
 			cond_resched();
@@ -6599,7 +6631,7 @@  void napi_busy_loop(unsigned int napi_id,
 		cpu_relax();
 	}
 	if (napi_poll)
-		busy_poll_stop(napi, have_poll_lock);
+		busy_poll_stop(napi, have_poll_lock, prefer_busy_poll);
 	preempt_enable();
 out:
 	rcu_read_unlock();
@@ -6650,8 +6682,10 @@  static enum hrtimer_restart napi_watchdog(struct hrtimer *timer)
 	 * NAPI_STATE_MISSED, since we do not react to a device IRQ.
 	 */
 	if (!napi_disable_pending(napi) &&
-	    !test_and_set_bit(NAPI_STATE_SCHED, &napi->state))
+	    !test_and_set_bit(NAPI_STATE_SCHED, &napi->state)) {
+		clear_bit(NAPI_STATE_PREFER_BUSY_POLL, &napi->state);
 		__napi_schedule_irqoff(napi);
+	}
 
 	return HRTIMER_NORESTART;
 }
@@ -6709,6 +6743,7 @@  void napi_disable(struct napi_struct *n)
 
 	hrtimer_cancel(&n->timer);
 
+	clear_bit(NAPI_STATE_PREFER_BUSY_POLL, &n->state);
 	clear_bit(NAPI_STATE_DISABLE, &n->state);
 }
 EXPORT_SYMBOL(napi_disable);
@@ -6771,6 +6806,19 @@  static int napi_poll(struct napi_struct *n, struct list_head *repoll)
 	if (likely(work < weight))
 		goto out_unlock;
 
+	/* The NAPI context has more processing work, but busy-polling
+	 * is preferred. Exit early.
+	 */
+	if (napi_prefer_busy_poll(n)) {
+		if (napi_complete_done(n, work)) {
+			/* If timeout is not set, we need to make sure
+			 * that the NAPI is re-scheduled.
+			 */
+			napi_schedule(n);
+		}
+		goto out_unlock;
+	}
+
 	/* Drivers must not modify the NAPI state if they
 	 * consume the entire weight.  In such cases this code
 	 * still "owns" the NAPI instance and therefore can
diff --git a/net/core/sock.c b/net/core/sock.c
index 727ea1cc633c..e05f2e52b5a8 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1159,6 +1159,12 @@  int sock_setsockopt(struct socket *sock, int level, int optname,
 				sk->sk_ll_usec = val;
 		}
 		break;
+	case SO_PREFER_BUSY_POLL:
+		if (valbool && !capable(CAP_NET_ADMIN))
+			ret = -EPERM;
+		else
+			WRITE_ONCE(sk->sk_prefer_busy_poll, valbool);
+		break;
 #endif
 
 	case SO_MAX_PACING_RATE:
@@ -1523,6 +1529,9 @@  int sock_getsockopt(struct socket *sock, int level, int optname,
 	case SO_BUSY_POLL:
 		v.val = sk->sk_ll_usec;
 		break;
+	case SO_PREFER_BUSY_POLL:
+		v.val = READ_ONCE(sk->sk_prefer_busy_poll);
+		break;
 #endif
 
 	case SO_MAX_PACING_RATE: