diff mbox series

[net-next,9/9] s390/qeth: improve selection of ethtool link modes

Message ID 20201117161520.1089-10-jwi@linux.ibm.com (mailing list archive)
State Accepted
Delegated to: Netdev Maintainers
Headers show
Series s390/qeth: updates 2020-11-17 | expand

Commit Message

Julian Wiedmann Nov. 17, 2020, 4:15 p.m. UTC
The link mode is a combination of port speed and port mode. But we
currently only consider the speed, and then typically select the
corresponding TP-based link mode. For 1G and 10G Fibre links this means
we display the wrong link modes.

Move the SPEED_* switch statements inside the PORT_* cases, and only
consider valid combinations where we can select the corresponding
link mode. Add the relevant link modes (1000baseX, 10000baseSR and
1000baseLR) that were introduced back with
commit 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G link modes").

To differentiate between 10000baseSR and 10000baseLR, use the detailed
media_type information that QUERY OAT provides.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
---
 drivers/s390/net/qeth_core.h      |   7 ++
 drivers/s390/net/qeth_core_main.c |  11 +++
 drivers/s390/net/qeth_ethtool.c   | 124 ++++++++++++++++++------------
 3 files changed, 93 insertions(+), 49 deletions(-)
diff mbox series

Patch

diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index c604e20a5e48..9e00917286a5 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -701,10 +701,17 @@  enum qeth_pnso_mode {
 	QETH_PNSO_ADDR_INFO,
 };
 
+enum qeth_link_mode {
+	QETH_LINK_MODE_UNKNOWN,
+	QETH_LINK_MODE_FIBRE_SHORT,
+	QETH_LINK_MODE_FIBRE_LONG,
+};
+
 struct qeth_link_info {
 	u32 speed;
 	u8 duplex;
 	u8 port;
+	enum qeth_link_mode link_mode;
 };
 
 #define QETH_BROADCAST_WITH_ECHO    0x01
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 57dad31aab4d..2752a585849d 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -5017,13 +5017,19 @@  static int qeth_init_link_info_oat_cb(struct qeth_card *card,
 	switch (phys_if->media_type) {
 	case QETH_QOAT_PHYS_MEDIA_COPPER:
 		link_info->port = PORT_TP;
+		link_info->link_mode = QETH_LINK_MODE_UNKNOWN;
 		break;
 	case QETH_QOAT_PHYS_MEDIA_FIBRE_SHORT:
+		link_info->port = PORT_FIBRE;
+		link_info->link_mode = QETH_LINK_MODE_FIBRE_SHORT;
+		break;
 	case QETH_QOAT_PHYS_MEDIA_FIBRE_LONG:
 		link_info->port = PORT_FIBRE;
+		link_info->link_mode = QETH_LINK_MODE_FIBRE_LONG;
 		break;
 	default:
 		link_info->port = PORT_OTHER;
+		link_info->link_mode = QETH_LINK_MODE_UNKNOWN;
 		break;
 	}
 
@@ -5037,6 +5043,7 @@  static void qeth_init_link_info(struct qeth_card *card)
 	if (IS_IQD(card) || IS_VM_NIC(card)) {
 		card->info.link_info.speed = SPEED_10000;
 		card->info.link_info.port = PORT_FIBRE;
+		card->info.link_info.link_mode = QETH_LINK_MODE_FIBRE_SHORT;
 	} else {
 		switch (card->info.link_type) {
 		case QETH_LINK_TYPE_FAST_ETH:
@@ -5063,6 +5070,8 @@  static void qeth_init_link_info(struct qeth_card *card)
 			card->info.link_info.speed = SPEED_UNKNOWN;
 			card->info.link_info.port = PORT_OTHER;
 		}
+
+		card->info.link_info.link_mode = QETH_LINK_MODE_UNKNOWN;
 	}
 
 	/* Get more accurate data via QUERY OAT: */
@@ -5088,6 +5097,8 @@  static void qeth_init_link_info(struct qeth_card *card)
 					card->info.link_info.duplex = link_info.duplex;
 				if (link_info.port != PORT_OTHER)
 					card->info.link_info.port = link_info.port;
+				if (link_info.link_mode != QETH_LINK_MODE_UNKNOWN)
+					card->info.link_info.link_mode = link_info.link_mode;
 			}
 		}
 	}
diff --git a/drivers/s390/net/qeth_ethtool.c b/drivers/s390/net/qeth_ethtool.c
index 50b0c1810850..3a51bbff0ffe 100644
--- a/drivers/s390/net/qeth_ethtool.c
+++ b/drivers/s390/net/qeth_ethtool.c
@@ -324,7 +324,8 @@  static int qeth_set_per_queue_coalesce(struct net_device *dev, u32 queue,
 /* Autoneg and full-duplex are supported and advertised unconditionally.     */
 /* Always advertise and support all speeds up to specified, and only one     */
 /* specified port type.							     */
-static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd)
+static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd,
+					enum qeth_link_mode link_mode)
 {
 	ethtool_link_ksettings_zero_link_mode(cmd, supported);
 	ethtool_link_ksettings_zero_link_mode(cmd, advertising);
@@ -337,58 +338,83 @@  static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd)
 	case PORT_TP:
 		ethtool_link_ksettings_add_link_mode(cmd, supported, TP);
 		ethtool_link_ksettings_add_link_mode(cmd, advertising, TP);
+
+		switch (cmd->base.speed) {
+		case SPEED_10000:
+			ethtool_link_ksettings_add_link_mode(cmd, supported,
+							     10000baseT_Full);
+			ethtool_link_ksettings_add_link_mode(cmd, advertising,
+							     10000baseT_Full);
+			fallthrough;
+		case SPEED_1000:
+			ethtool_link_ksettings_add_link_mode(cmd, supported,
+							     1000baseT_Full);
+			ethtool_link_ksettings_add_link_mode(cmd, advertising,
+							     1000baseT_Full);
+			ethtool_link_ksettings_add_link_mode(cmd, supported,
+							     1000baseT_Half);
+			ethtool_link_ksettings_add_link_mode(cmd, advertising,
+							     1000baseT_Half);
+			fallthrough;
+		case SPEED_100:
+			ethtool_link_ksettings_add_link_mode(cmd, supported,
+							     100baseT_Full);
+			ethtool_link_ksettings_add_link_mode(cmd, advertising,
+							     100baseT_Full);
+			ethtool_link_ksettings_add_link_mode(cmd, supported,
+							     100baseT_Half);
+			ethtool_link_ksettings_add_link_mode(cmd, advertising,
+							     100baseT_Half);
+			fallthrough;
+		case SPEED_10:
+			ethtool_link_ksettings_add_link_mode(cmd, supported,
+							     10baseT_Full);
+			ethtool_link_ksettings_add_link_mode(cmd, advertising,
+							     10baseT_Full);
+			ethtool_link_ksettings_add_link_mode(cmd, supported,
+							     10baseT_Half);
+			ethtool_link_ksettings_add_link_mode(cmd, advertising,
+							     10baseT_Half);
+			break;
+		default:
+			break;
+		}
+
 		break;
 	case PORT_FIBRE:
 		ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
 		ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
-		break;
-	default:
-		break;
-	}
 
-	/* partially does fall through, to also select lower speeds */
-	switch (cmd->base.speed) {
-	case SPEED_25000:
-		ethtool_link_ksettings_add_link_mode(cmd, supported,
-						     25000baseSR_Full);
-		ethtool_link_ksettings_add_link_mode(cmd, advertising,
-						     25000baseSR_Full);
-		break;
-	case SPEED_10000:
-		ethtool_link_ksettings_add_link_mode(cmd, supported,
-						     10000baseT_Full);
-		ethtool_link_ksettings_add_link_mode(cmd, advertising,
-						     10000baseT_Full);
-		fallthrough;
-	case SPEED_1000:
-		ethtool_link_ksettings_add_link_mode(cmd, supported,
-						     1000baseT_Full);
-		ethtool_link_ksettings_add_link_mode(cmd, advertising,
-						     1000baseT_Full);
-		ethtool_link_ksettings_add_link_mode(cmd, supported,
-						     1000baseT_Half);
-		ethtool_link_ksettings_add_link_mode(cmd, advertising,
-						     1000baseT_Half);
-		fallthrough;
-	case SPEED_100:
-		ethtool_link_ksettings_add_link_mode(cmd, supported,
-						     100baseT_Full);
-		ethtool_link_ksettings_add_link_mode(cmd, advertising,
-						     100baseT_Full);
-		ethtool_link_ksettings_add_link_mode(cmd, supported,
-						     100baseT_Half);
-		ethtool_link_ksettings_add_link_mode(cmd, advertising,
-						     100baseT_Half);
-		fallthrough;
-	case SPEED_10:
-		ethtool_link_ksettings_add_link_mode(cmd, supported,
-						     10baseT_Full);
-		ethtool_link_ksettings_add_link_mode(cmd, advertising,
-						     10baseT_Full);
-		ethtool_link_ksettings_add_link_mode(cmd, supported,
-						     10baseT_Half);
-		ethtool_link_ksettings_add_link_mode(cmd, advertising,
-						     10baseT_Half);
+		switch (cmd->base.speed) {
+		case SPEED_25000:
+			ethtool_link_ksettings_add_link_mode(cmd, supported,
+							     25000baseSR_Full);
+			ethtool_link_ksettings_add_link_mode(cmd, advertising,
+							     25000baseSR_Full);
+			break;
+		case SPEED_10000:
+			if (link_mode == QETH_LINK_MODE_FIBRE_LONG) {
+				ethtool_link_ksettings_add_link_mode(cmd, supported,
+								     10000baseLR_Full);
+				ethtool_link_ksettings_add_link_mode(cmd, advertising,
+								     10000baseLR_Full);
+			} else if (link_mode == QETH_LINK_MODE_FIBRE_SHORT) {
+				ethtool_link_ksettings_add_link_mode(cmd, supported,
+								     10000baseSR_Full);
+				ethtool_link_ksettings_add_link_mode(cmd, advertising,
+								     10000baseSR_Full);
+			}
+			break;
+		case SPEED_1000:
+			ethtool_link_ksettings_add_link_mode(cmd, supported,
+							     1000baseX_Full);
+			ethtool_link_ksettings_add_link_mode(cmd, advertising,
+							     1000baseX_Full);
+			break;
+		default:
+			break;
+		}
+
 		break;
 	default:
 		break;
@@ -420,7 +446,7 @@  static int qeth_get_link_ksettings(struct net_device *netdev,
 			cmd->base.port = link_info.port;
 	}
 
-	qeth_set_ethtool_link_modes(cmd);
+	qeth_set_ethtool_link_modes(cmd, card->info.link_info.link_mode);
 
 	return 0;
 }