@@ -309,6 +309,26 @@ static struct ipa_mem_data ipa_mem_data = {
.smem_size = 0x00002000,
};
+static struct ipa_clock_data ipa_clock_data = {
+ .core_clock_rate = 100 * 1000 * 1000, /* Hz */
+ /* Interconnect rates are in 1000 byte/second units */
+ .interconnect = {
+ [IPA_INTERCONNECT_MEMORY] = {
+ .peak_rate = 465000, /* 465 MBps */
+ .average_rate = 80000, /* 80 MBps */
+ },
+ /* Average rate is unused for the next two interconnects */
+ [IPA_INTERCONNECT_IMEM] = {
+ .peak_rate = 68570, /* 68.570 MBps */
+ .average_rate = 0, /* unused */
+ },
+ [IPA_INTERCONNECT_CONFIG] = {
+ .peak_rate = 30000, /* 30 MBps */
+ .average_rate = 0, /* unused */
+ },
+ },
+};
+
/* Configuration data for the SC7180 SoC. */
const struct ipa_data ipa_data_sc7180 = {
.version = IPA_VERSION_4_2,
@@ -316,4 +336,5 @@ const struct ipa_data ipa_data_sc7180 = {
.endpoint_data = ipa_gsi_endpoint_data,
.resource_data = &ipa_resource_data,
.mem_data = &ipa_mem_data,
+ .clock_data = &ipa_clock_data,
};
@@ -329,6 +329,26 @@ static struct ipa_mem_data ipa_mem_data = {
.smem_size = 0x00002000,
};
+static struct ipa_clock_data ipa_clock_data = {
+ .core_clock_rate = 75 * 1000 * 1000, /* Hz */
+ /* Interconnect rates are in 1000 byte/second units */
+ .interconnect = {
+ [IPA_INTERCONNECT_MEMORY] = {
+ .peak_rate = 600000, /* 600 MBps */
+ .average_rate = 80000, /* 80 MBps */
+ },
+ /* Average rate is unused for the next two interconnects */
+ [IPA_INTERCONNECT_IMEM] = {
+ .peak_rate = 350000, /* 350 MBps */
+ .average_rate = 0, /* unused */
+ },
+ [IPA_INTERCONNECT_CONFIG] = {
+ .peak_rate = 40000, /* 40 MBps */
+ .average_rate = 0, /* unused */
+ },
+ },
+};
+
/* Configuration data for the SDM845 SoC. */
const struct ipa_data ipa_data_sdm845 = {
.version = IPA_VERSION_3_5_1,
@@ -336,4 +356,5 @@ const struct ipa_data ipa_data_sdm845 = {
.endpoint_data = ipa_gsi_endpoint_data,
.resource_data = &ipa_resource_data,
.mem_data = &ipa_mem_data,
+ .clock_data = &ipa_clock_data,
};
Populate the core clock rate and interconnect average and peak bandwidth data for SDM845 and SC7180 in their configuration data files. At this point we still don't *use* this data. Note that SC7180 actually defines a new core clock rate (100 MHz instead of 75 MHz) and new interconnect bandwidth values. They will be activated in the next commit, which uses the configured values rather than the fixed constants. Signed-off-by: Alex Elder <elder@linaro.org> --- drivers/net/ipa/ipa_data-sc7180.c | 21 +++++++++++++++++++++ drivers/net/ipa/ipa_data-sdm845.c | 21 +++++++++++++++++++++ 2 files changed, 42 insertions(+)