diff mbox series

[net-next,14/15] net: phy: qsemi: remove the use of .ack_interrupt()

Message ID 20201123153817.1616814-15-ciorneiioana@gmail.com (mailing list archive)
State Accepted
Commit a1a4417458cd0b5a9b4ce574524d166f4dcd642f
Delegated to: Netdev Maintainers
Headers show
Series net: phy: add support for shared interrupts (part 3) | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 41 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Ioana Ciornei Nov. 23, 2020, 3:38 p.m. UTC 
From: Ioana Ciornei <ioana.ciornei@nxp.com>

In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Also, add a comment describing the multiple step interrupt
acknoledgement process.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
 drivers/net/phy/qsemi.c | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
index 97f29ed2f0ca..d5c1aaa8236a 100644
--- a/drivers/net/phy/qsemi.c
+++ b/drivers/net/phy/qsemi.c
@@ -75,6 +75,10 @@  static int qs6612_ack_interrupt(struct phy_device *phydev)
 {
 	int err;
 
+	/* The Interrupt Source register is not self-clearing, bits 4 and 5 are
+	 * cleared when MII_BMSR is read and bits 1 and 3 are cleared when
+	 * MII_EXPANSION is read
+	 */
 	err = phy_read(phydev, MII_QS6612_ISR);
 
 	if (err < 0)
@@ -96,11 +100,22 @@  static int qs6612_ack_interrupt(struct phy_device *phydev)
 static int qs6612_config_intr(struct phy_device *phydev)
 {
 	int err;
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		/* clear any interrupts before enabling them */
+		err = qs6612_ack_interrupt(phydev);
+		if (err)
+			return err;
+
 		err = phy_write(phydev, MII_QS6612_IMR,
 				MII_QS6612_IMR_INIT);
-	else
+	} else {
 		err = phy_write(phydev, MII_QS6612_IMR, 0);
+		if (err)
+			return err;
+
+		/* clear any leftover interrupts */
+		err = qs6612_ack_interrupt(phydev);
+	}
 
 	return err;
 
@@ -133,7 +148,6 @@  static struct phy_driver qs6612_driver[] = { {
 	.phy_id_mask	= 0xfffffff0,
 	/* PHY_BASIC_FEATURES */
 	.config_init	= qs6612_config_init,
-	.ack_interrupt	= qs6612_ack_interrupt,
 	.config_intr	= qs6612_config_intr,
 	.handle_interrupt = qs6612_handle_interrupt,
 } };