diff mbox series

[4/4] net: ethernet: stmmac: delete the eee_ctrl_timer after napi disabled

Message ID 20201202085949.3279-6-qiangqing.zhang@nxp.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series patch for stmmac | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Guessed tree name to be net-next
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 31 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Joakim Zhang Dec. 2, 2020, 8:59 a.m. UTC
From: Fugang Duan <fugang.duan@nxp.com>

There have chance to re-enable the eee_ctrl_timer and fire the timer
in napi callback after delete the timer in .stmmac_release(), which
introduces to access eee registers in the timer function after clocks
are disabled then causes system hang. Found this issue when do
suspend/resume and reboot stress test.

It is safe to delete the timer after napi disabled and disable lpi mode.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

Comments

Jakub Kicinski Dec. 3, 2020, 6:33 p.m. UTC | #1
On Wed,  2 Dec 2020 16:59:49 +0800 Joakim Zhang wrote:
> From: Fugang Duan <fugang.duan@nxp.com>
> 
> There have chance to re-enable the eee_ctrl_timer and fire the timer
> in napi callback after delete the timer in .stmmac_release(), which
> introduces to access eee registers in the timer function after clocks
> are disabled then causes system hang. Found this issue when do
> suspend/resume and reboot stress test.
> 
> It is safe to delete the timer after napi disabled and disable lpi mode.

And here
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 53c5d77eba57..03c6995d276a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2938,9 +2938,6 @@  static int stmmac_release(struct net_device *dev)
 	struct stmmac_priv *priv = netdev_priv(dev);
 	u32 chan;
 
-	if (priv->eee_enabled)
-		del_timer_sync(&priv->eee_ctrl_timer);
-
 	if (device_may_wakeup(priv->device))
 		phylink_speed_down(priv->phylink, false);
 	/* Stop and disconnect the PHY */
@@ -2959,6 +2956,11 @@  static int stmmac_release(struct net_device *dev)
 	if (priv->lpi_irq > 0)
 		free_irq(priv->lpi_irq, dev);
 
+	if (priv->eee_enabled) {
+		priv->tx_path_in_lpi_mode = false;
+		del_timer_sync(&priv->eee_ctrl_timer);
+	}
+
 	/* Stop TX/RX DMA and clear the descriptors */
 	stmmac_stop_all_dma(priv);
 
@@ -5185,6 +5187,11 @@  int stmmac_suspend(struct device *dev)
 	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
 		hrtimer_cancel(&priv->tx_queue[chan].txtimer);
 
+	if (priv->eee_enabled) {
+		priv->tx_path_in_lpi_mode = false;
+		del_timer_sync(&priv->eee_ctrl_timer);
+	}
+
 	/* Stop TX/RX DMA */
 	stmmac_stop_all_dma(priv);