| Message ID | 20201222134439.2478449-7-vladimir.oltean@nxp.com (mailing list archive) |
|---|---|
| State | RFC |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | tag_8021q for Ocelot switches | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | success | Link |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Clearly marked for net-next |
| netdev/subject_prefix | success | Link |
| netdev/cc_maintainers | success | CCed 7 of 7 maintainers |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 8 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
| netdev/header_inline | success | Link |
| netdev/stable | success | Stable not CCed |
diff --git a/drivers/net/ethernet/mscc/ocelot_vsc7514.c b/drivers/net/ethernet/mscc/ocelot_vsc7514.c index 00c6d9838970..ed632dd79245 100644 --- a/drivers/net/ethernet/mscc/ocelot_vsc7514.c +++ b/drivers/net/ethernet/mscc/ocelot_vsc7514.c @@ -702,7 +702,7 @@ static irqreturn_t ocelot_xtr_irq_handler(int irq, void *arg) dev->stats.rx_packets++; } - if (err) + if (err < 0) while (ocelot_read(ocelot, QS_XTR_DATA_PRESENT) & BIT(grp)) ocelot_read_rix(ocelot, QS_XTR_RD, grp);
It appears that the intention of this snippet of code is to not exit ocelot_xtr_irq_handler() while in the middle of extracting a frame. The problem in extracting it word by word is that future extraction attempts are really easy to get desynchronized, since the IRQ handler assumes that the first 16 bytes are the IFH, which give further information about the frame, such as frame length. But during normal operation, "err" will not be 0, but 4, set from here: for (i = 0; i < OCELOT_TAG_LEN / 4; i++) { err = ocelot_rx_frame_word(ocelot, grp, true, &ifh[i]); if (err != 4) break; } if (err != 4) break; In that case, draining the extraction queue is a no-op. So explicitly make this code execute only on negative err. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> --- Changes in v2: Patch is new. drivers/net/ethernet/mscc/ocelot_vsc7514.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)