diff mbox series

[net,1/4] net: stmmac: dwmac-sun8i: Fix probe error handling

Message ID 20210103111744.34989-2-samuel@sholland.org (mailing list archive)
State Accepted
Delegated to: Netdev Maintainers
Headers show
Series Fixes for dwmac-sun8i suspend/resume | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net
netdev/subject_prefix success Link
netdev/cc_maintainers warning 3 maintainers not CCed: linux-stm32@st-md-mailman.stormreply.com clabbe.montjoie@gmail.com mcoquelin.stm32@gmail.com
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 65 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Samuel Holland Jan. 3, 2021, 11:17 a.m. UTC
stmmac_pltfr_remove does three things in one function, making it
inapproprate for unwinding the steps in the probe function. Currently,
a failure before the call to stmmac_dvr_probe would leak OF node
references due to missing a call to stmmac_remove_config_dt. And an
error in stmmac_dvr_probe would cause the driver to attempt to remove a
netdevice that was never added. Fix these by reordering the init and
splitting out the error handling steps.

Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Fixes: 40a1dcee2d18 ("net: ethernet: dwmac-sun8i: Use the correct function in exit path")
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 25 +++++++++++--------
 1 file changed, 15 insertions(+), 10 deletions(-)

Comments

Chen-Yu Tsai Jan. 4, 2021, 1:42 p.m. UTC | #1
On Sun, Jan 3, 2021 at 7:17 PM Samuel Holland <samuel@sholland.org> wrote:
>
> stmmac_pltfr_remove does three things in one function, making it
> inapproprate for unwinding the steps in the probe function. Currently,
> a failure before the call to stmmac_dvr_probe would leak OF node
> references due to missing a call to stmmac_remove_config_dt. And an
> error in stmmac_dvr_probe would cause the driver to attempt to remove a
> netdevice that was never added. Fix these by reordering the init and
> splitting out the error handling steps.
>
> Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
> Fixes: 40a1dcee2d18 ("net: ethernet: dwmac-sun8i: Use the correct function in exit path")
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 58e0511badba..b20f261fce5b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -1134,10 +1134,6 @@  static int sun8i_dwmac_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-	if (IS_ERR(plat_dat))
-		return PTR_ERR(plat_dat);
-
 	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
 	if (!gmac)
 		return -ENOMEM;
@@ -1201,11 +1197,15 @@  static int sun8i_dwmac_probe(struct platform_device *pdev)
 	ret = of_get_phy_mode(dev->of_node, &interface);
 	if (ret)
 		return -EINVAL;
-	plat_dat->interface = interface;
+
+	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
 
 	/* platform data specifying hardware features and callbacks.
 	 * hardware features were copied from Allwinner drivers.
 	 */
+	plat_dat->interface = interface;
 	plat_dat->rx_coe = STMMAC_RX_COE_TYPE2;
 	plat_dat->tx_coe = 1;
 	plat_dat->has_sun8i = true;
@@ -1216,7 +1216,7 @@  static int sun8i_dwmac_probe(struct platform_device *pdev)
 
 	ret = sun8i_dwmac_init(pdev, plat_dat->bsp_priv);
 	if (ret)
-		return ret;
+		goto dwmac_deconfig;
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (ret)
@@ -1230,7 +1230,7 @@  static int sun8i_dwmac_probe(struct platform_device *pdev)
 	if (gmac->variant->soc_has_internal_phy) {
 		ret = get_ephy_nodes(priv);
 		if (ret)
-			goto dwmac_exit;
+			goto dwmac_remove;
 		ret = sun8i_dwmac_register_mdio_mux(priv);
 		if (ret) {
 			dev_err(&pdev->dev, "Failed to register mux\n");
@@ -1239,15 +1239,20 @@  static int sun8i_dwmac_probe(struct platform_device *pdev)
 	} else {
 		ret = sun8i_dwmac_reset(priv);
 		if (ret)
-			goto dwmac_exit;
+			goto dwmac_remove;
 	}
 
 	return ret;
 dwmac_mux:
 	sun8i_dwmac_unset_syscon(gmac);
+dwmac_remove:
+	stmmac_dvr_remove(&pdev->dev);
 dwmac_exit:
-	stmmac_pltfr_remove(pdev);
-return ret;
+	sun8i_dwmac_exit(pdev, gmac);
+dwmac_deconfig:
+	stmmac_remove_config_dt(pdev, plat_dat);
+
+	return ret;
 }
 
 static const struct of_device_id sun8i_dwmac_match[] = {