@@ -1,108 +1,13 @@
* Broadcom Starfighter 2 integrated swich
-Required properties:
+See dsa/brcm,bcm7445-switch-v4.0.yaml for the documentation.
-- compatible: should be one of
- "brcm,bcm7445-switch-v4.0"
- "brcm,bcm7278-switch-v4.0"
- "brcm,bcm7278-switch-v4.8"
-- reg: addresses and length of the register sets for the device, must be 6
- pairs of register addresses and lengths
-- interrupts: interrupts for the devices, must be two interrupts
-- #address-cells: must be 1, see dsa/dsa.txt
-- #size-cells: must be 0, see dsa/dsa.txt
-
-Deprecated binding required properties:
+*Deprecated* binding required properties:
- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
- #address-cells: must be 2, see dsa/dsa.txt
-Subnodes:
-
-The integrated switch subnode should be specified according to the binding
-described in dsa/dsa.txt.
-
-Optional properties:
-
-- reg-names: litteral names for the device base register addresses, when present
- must be: "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb"
-
-- interrupt-names: litternal names for the device interrupt lines, when present
- must be: "switch_0" and "switch_1"
-
-- brcm,num-gphy: specify the maximum number of integrated gigabit PHYs in the
- switch
-
-- brcm,num-rgmii-ports: specify the maximum number of RGMII interfaces supported
- by the switch
-
-- brcm,fcb-pause-override: boolean property, if present indicates that the switch
- supports Failover Control Block pause override capability
-
-- brcm,acb-packets-inflight: boolean property, if present indicates that the switch
- Admission Control Block supports reporting the number of packets in-flight in a
- switch queue
-
-- resets: a single phandle and reset identifier pair. See
- Documentation/devicetree/bindings/reset/reset.txt for details.
-
-- reset-names: If the "reset" property is specified, this property should have
- the value "switch" to denote the switch reset line.
-
-- clocks: when provided, the first phandle is to the switch's main clock and
- is valid for both BCM7445 and BCM7278. The second phandle is only applicable
- to BCM7445 and is to support dividing the switch core clock.
-
-- clock-names: when provided, the first phandle must be "sw_switch", and the
- second must be named "sw_switch_mdiv".
-
-Port subnodes:
-
-Optional properties:
-
-- brcm,use-bcm-hdr: boolean property, if present, indicates that the switch
- port has Broadcom tags enabled (per-packet metadata)
-
-Example:
-
-switch_top@f0b00000 {
- compatible = "simple-bus";
- #size-cells = <1>;
- #address-cells = <1>;
- ranges = <0 0xf0b00000 0x40804>;
-
- ethernet_switch@0 {
- compatible = "brcm,bcm7445-switch-v4.0";
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x0 0x40000
- 0x40000 0x110
- 0x40340 0x30
- 0x40380 0x30
- 0x40400 0x34
- 0x40600 0x208>;
- reg-names = "core", "reg", intrl2_0", "intrl2_1",
- "fcb, "acb";
- interrupts = <0 0x18 0
- 0 0x19 0>;
- brcm,num-gphy = <1>;
- brcm,num-rgmii-ports = <2>;
- brcm,fcb-pause-override;
- brcm,acb-packets-inflight;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- label = "gphy";
- reg = <0>;
- };
- };
- };
-};
-
Example using the old DSA DeviceTree binding:
switch_top@f0b00000 {
@@ -132,7 +37,7 @@ switch_top@f0b00000 {
switch@0 {
reg = <0 0>;
#size-cells = <0>;
- #address-cells <1>;
+ #address-cells = <1>;
port@0 {
label = "gphy";
new file mode 100644
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/brcm,sf2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Starfighter 2 integrated swich
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+ - $ref: "dsa.yaml#"
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - brcm,bcm7445-switch-v4.0
+ - brcm,bcm7278-switch-v4.0
+ - brcm,bcm7278-switch-v4.8
+
+ reg:
+ minItems: 6
+ maxItems: 6
+
+ reg-names:
+ items:
+ - const: core
+ - const: reg
+ - const: intrl2_0
+ - const: intrl2_1
+ - const: fcb
+ - const: acb
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: switch_0
+ - const: switch_1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: switch
+
+ clocks:
+ items:
+ - description: switch's main clock (valid for both BCM7445 and BCM7278)
+ - description: only applicable to BCM7445 and is to support dividing the switch core clock.
+
+ clock-names:
+ items:
+ - const: sw_switch
+ - const: sw_switch_mdiv
+
+ brcm,num-gphy:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum number of integrated gigabit PHYs in the switch
+
+ brcm,num-rgmii-ports:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum number of RGMII interfaces supported by the switch
+
+ brcm,fcb-pause-override:
+ description: if present indicates that the switch supports Failover Control
+ Block pause override capability
+ type: boolean
+
+ brcm,acb-packets-inflight:
+ description: if present indicates that the switch Admission Control Block
+ supports reporting the number of packets in-flight in a switch queue
+ type: boolean
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ ports:
+ type: object
+
+ properties:
+ brcm,use-bcm-hdr:
+ description: if present, indicates that the switch port has Broadcom
+ tags enabled (per-packet metadata)
+ type: boolean
+
+required:
+ - reg
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ switch@f0b00000 {
+ compatible = "brcm,bcm7445-switch-v4.0";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xf0b00000 0x40000>,
+ <0xf0b40000 0x110>,
+ <0xf0b40340 0x30>,
+ <0xf0b40380 0x30>,
+ <0xf0b40400 0x34>,
+ <0xf0b40600 0x208>;
+ reg-names = "core", "reg", "intrl2_0", "intrl2_1",
+ "fcb", "acb";
+ interrupts = <0 0x18 0>,
+ <0 0x19 0>;
+ brcm,num-gphy = <1>;
+ brcm,num-rgmii-ports = <2>;
+ brcm,fcb-pause-override;
+ brcm,acb-packets-inflight;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ label = "gphy";
+ reg = <0>;
+ };
+ };
+ };