[net-next,v2,10/11] selftests: Add new option for client-side passwords

Message ID	20210110001852.35653-11-dsahern@kernel.org (mailing list archive)
State	Superseded
Delegated to:	Netdev Maintainers
Headers	show Return-Path: <netdev-owner@kernel.org> From: David Ahern <dsahern@kernel.org> To: netdev@vger.kernel.org Cc: davem@davemloft.net, kuba@kernel.org, schoen@loyalty.org, David Ahern <dsahern@gmail.com> Subject: [PATCH net-next v2 10/11] selftests: Add new option for client-side passwords Date: Sat, 9 Jan 2021 17:18:51 -0700 Message-Id: <20210110001852.35653-11-dsahern@kernel.org> In-Reply-To: <20210110001852.35653-1-dsahern@kernel.org> References: <20210110001852.35653-1-dsahern@kernel.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	selftests: Updates to allow single instance of nettest for client and server \| expand [net-next,v2,00/11] selftests: Updates to allow single instance of nettest for client and server [net-next,v2,01/11] selftests: Move device validation in nettest [net-next,v2,02/11] selftests: Move convert_addr up in nettest [net-next,v2,03/11] selftests: Move address validation in nettest [net-next,v2,04/11] selftests: Add options to set network namespace to nettest [net-next,v2,05/11] selftests: Add support to nettest to run both client and server [net-next,v2,06/11] selftests: Use separate stdout and stderr buffers in nettest [net-next,v2,07/11] selftests: Add missing newline in nettest error messages [net-next,v2,08/11] selftests: Make address validation apply only to client mode [net-next,v2,09/11] selftests: Consistently specify address for MD5 protection [net-next,v2,10/11] selftests: Add new option for client-side passwords [net-next,v2,11/11] selftests: Add separate options for server device bindings

Context	Check	Description
netdev/cover_letter	success	Link
netdev/fixes_present	success	Link
netdev/patch_count	success	Link
netdev/tree_selection	success	Clearly marked for net-next
netdev/subject_prefix	success	Link
netdev/cc_maintainers	warning	2 maintainers not CCed: shuah@kernel.org linux-kselftest@vger.kernel.org
netdev/source_inline	success	Was 0 now: 0
netdev/verify_signedoff	success	Link
netdev/module_param	success	Was 0 now: 0
netdev/build_32bit	success	Errors and warnings before: 0 this patch: 0
netdev/kdoc	success	Errors and warnings before: 0 this patch: 0
netdev/verify_fixes	success	Link
netdev/checkpatch	success	total: 0 errors, 0 warnings, 0 checks, 391 lines checked
netdev/build_allmodconfig_warn	success	Errors and warnings before: 0 this patch: 0
netdev/header_inline	success	Link
netdev/stable	success	Stable not CCed

diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index edd33f83f80e..5d15ded2433b 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -803,7 +803,7 @@ ipv4_tcp_md5_novrf() log_start run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: Single address config" # client sends MD5, server not configured @@ -811,7 +811,7 @@ ipv4_tcp_md5_novrf() show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -s & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: Server no config, client uses password" # wrong password @@ -819,7 +819,7 @@ ipv4_tcp_md5_novrf() show_hint "Should timeout since client uses wrong password" run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: Client uses wrong password" # client from different address @@ -827,7 +827,7 @@ ipv4_tcp_md5_novrf() show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -s -M ${MD5_PW} -m ${NSB_LO_IP} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: Client address does not match address configured with password" # @@ -838,7 +838,7 @@ ipv4_tcp_md5_novrf() log_start run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: Prefix config" # client in prefix, wrong password @@ -846,7 +846,7 @@ ipv4_tcp_md5_novrf() show_hint "Should timeout since client uses wrong password" run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: Prefix config, client uses wrong password" # client outside of prefix @@ -854,7 +854,7 @@ ipv4_tcp_md5_novrf() show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} & sleep 1 - run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: Prefix config, client address not in configured prefix" } @@ -871,7 +871,7 @@ ipv4_tcp_md5() log_start run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config" # client sends MD5, server not configured @@ -879,7 +879,7 @@ ipv4_tcp_md5() show_hint "Should timeout since server does not have MD5 auth" run_cmd nettest -s -d ${VRF} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Server no config, client uses password" # wrong password @@ -887,7 +887,7 @@ ipv4_tcp_md5() show_hint "Should timeout since client uses wrong password" run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Client uses wrong password" # client from different address @@ -895,7 +895,7 @@ ipv4_tcp_md5() show_hint "Should timeout since server config differs from client" run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Client address does not match address configured with password" # @@ -906,7 +906,7 @@ ipv4_tcp_md5() log_start run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config" # client in prefix, wrong password @@ -914,7 +914,7 @@ ipv4_tcp_md5() show_hint "Should timeout since client uses wrong password" run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password" # client outside of prefix @@ -922,7 +922,7 @@ ipv4_tcp_md5() show_hint "Should timeout since client address is outside of prefix" run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & sleep 1 - run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix" # @@ -933,14 +933,14 @@ ipv4_tcp_md5() run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF" log_start run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & sleep 1 - run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_WRONG_PW} + run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF" log_start @@ -948,7 +948,7 @@ ipv4_tcp_md5() run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & sleep 1 - run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw" log_start @@ -956,21 +956,21 @@ ipv4_tcp_md5() run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw" log_start run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF" log_start run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & sleep 1 - run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_WRONG_PW} + run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF" log_start @@ -978,7 +978,7 @@ ipv4_tcp_md5() run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & sleep 1 - run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_PW} + run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw" log_start @@ -986,7 +986,7 @@ ipv4_tcp_md5() run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & sleep 1 - run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW} + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw" # @@ -2267,7 +2267,7 @@ ipv6_tcp_md5_novrf() log_start run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: Single address config" # client sends MD5, server not configured @@ -2275,7 +2275,7 @@ ipv6_tcp_md5_novrf() show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -6 -s & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: Server no config, client uses password" # wrong password @@ -2283,7 +2283,7 @@ ipv6_tcp_md5_novrf() show_hint "Should timeout since client uses wrong password" run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: Client uses wrong password" # client from different address @@ -2291,7 +2291,7 @@ ipv6_tcp_md5_novrf() show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_LO_IP6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: Client address does not match address configured with password" # @@ -2302,7 +2302,7 @@ ipv6_tcp_md5_novrf() log_start run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: Prefix config" # client in prefix, wrong password @@ -2310,7 +2310,7 @@ ipv6_tcp_md5_novrf() show_hint "Should timeout since client uses wrong password" run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: Prefix config, client uses wrong password" # client outside of prefix @@ -2318,7 +2318,7 @@ ipv6_tcp_md5_novrf() show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} & sleep 1 - run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: Prefix config, client address not in configured prefix" } @@ -2335,7 +2335,7 @@ ipv6_tcp_md5() log_start run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config" # client sends MD5, server not configured @@ -2343,7 +2343,7 @@ ipv6_tcp_md5() show_hint "Should timeout since server does not have MD5 auth" run_cmd nettest -6 -s -d ${VRF} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Server no config, client uses password" # wrong password @@ -2351,7 +2351,7 @@ ipv6_tcp_md5() show_hint "Should timeout since client uses wrong password" run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Client uses wrong password" # client from different address @@ -2359,7 +2359,7 @@ ipv6_tcp_md5() show_hint "Should timeout since server config differs from client" run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Client address does not match address configured with password" # @@ -2370,7 +2370,7 @@ ipv6_tcp_md5() log_start run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config" # client in prefix, wrong password @@ -2378,7 +2378,7 @@ ipv6_tcp_md5() show_hint "Should timeout since client uses wrong password" run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password" # client outside of prefix @@ -2386,7 +2386,7 @@ ipv6_tcp_md5() show_hint "Should timeout since client address is outside of prefix" run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & sleep 1 - run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix" # @@ -2397,14 +2397,14 @@ ipv6_tcp_md5() run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF" log_start run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & sleep 1 - run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW} + run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF" log_start @@ -2412,7 +2412,7 @@ ipv6_tcp_md5() run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & sleep 1 - run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw" log_start @@ -2420,21 +2420,21 @@ ipv6_tcp_md5() run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw" log_start run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF" log_start run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & sleep 1 - run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW} + run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF" log_start @@ -2442,7 +2442,7 @@ ipv6_tcp_md5() run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & sleep 1 - run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_PW} + run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw" log_start @@ -2450,7 +2450,7 @@ ipv6_tcp_md5() run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & sleep 1 - run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW} + run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw" # diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c index 8a3ddc51883f..a835cab08029 100644 --- a/tools/testing/selftests/net/nettest.c +++ b/tools/testing/selftests/net/nettest.c @@ -85,6 +85,7 @@ struct sock_args { const char *serverns; const char *password; + const char *client_pw; /* prefix for MD5 password */ const char *md5_prefix_str; union { @@ -1653,6 +1654,8 @@ static int do_client(struct sock_args *args) break; } + args->password = args->client_pw; + if (args->has_grp) sd = msock_client(args); else @@ -1761,7 +1764,7 @@ static int ipc_parent(int cpid, int fd, struct sock_args *args) return client_status; } -#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:m:d:BN:O:SCi6L:0:1:2:Fbq" +#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:X:m:d:BN:O:SCi6L:0:1:2:Fbq" static void print_usage(char *prog) { @@ -1793,6 +1796,7 @@ static void print_usage(char *prog) " -n num number of times to send message\n" "\n" " -M password use MD5 sum protection\n" + " -X password MD5 password for client mode\n" " -m prefix/len prefix and length to use for MD5 key\n" " -g grp multicast group (e.g., 239.1.1.1)\n" " -i interactive mode (default is echo and terminate)\n" @@ -1897,6 +1901,9 @@ int main(int argc, char *argv[]) case 'M': args.password = optarg; break; + case 'X': + args.client_pw = optarg; + break; case 'm': args.md5_prefix_str = optarg; break;

[net-next,v2,10/11] selftests: Add new option for client-side passwords

Checks

Commit Message

Patch