[net-next,04/17] can: dev: move bittiming related code into seperate file

Message ID	20210114075617.1402597-5-mkl@pengutronix.de (mailing list archive)
State	Accepted
Delegated to:	Netdev Maintainers
Headers	show Return-Path: <netdev-owner@kernel.org> From: Marc Kleine-Budde <mkl@pengutronix.de> To: netdev@vger.kernel.org Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org, kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de>, Vincent Mailhol <mailhol.vincent@wanadoo.fr> Subject: [net-next 04/17] can: dev: move bittiming related code into seperate file Date: Thu, 14 Jan 2021 08:56:04 +0100 Message-Id: <20210114075617.1402597-5-mkl@pengutronix.de> In-Reply-To: <20210114075617.1402597-1-mkl@pengutronix.de> References: <20210114075617.1402597-1-mkl@pengutronix.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	pull-request: can-next 2021-01-14 \| expand pull-request: can-next 2021-01-14 [net-next,02/17] MAINTAINERS: CAN network layer: add missing header file can-ml.h [net-next,03/17] can: dev: move driver related infrastructure into separate subdir [net-next,04/17] can: dev: move bittiming related code into seperate file [net-next,05/17] can: dev: move length related code into seperate file [net-next,06/17] can: dev: move skb related into seperate file [net-next,07/17] can: dev: move netlink related code into seperate file [net-next,08/17] can: length: convert to kernel coding style [net-next,09/17] can: length: can_fd_len2dlc(): simplify length calculcation [net-next,10/17] can: length: canfd_sanitize_len(): add function to sanitize CAN-FD data length [net-next,11/17] can: length: can_skb_get_frame_len(): introduce function to get data length of fra… [net-next,12/17] can: dev: extend struct can_skb_priv to hold CAN frame length [net-next,13/17] can: dev: can_put_echo_skb(): extend to handle frame_len [net-next,14/17] can: dev: can_get_echo_skb(): extend to return can frame length [net-next,15/17] can: dev: can_rx_offload_get_echo_skb(): extend to return can frame length [net-next,16/17] can: dev: can_put_echo_skb(): add software tx timestamps [net-next,17/17] can: tcan4x5x: remove __packed attribute from struct tcan4x5x_map_buf

Context	Check	Description
netdev/tree_selection	success	Guessing tree name failed - patch did not apply

diff --git a/MAINTAINERS b/MAINTAINERS index c3091a91ebbf..d17662df1cd7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3943,6 +3943,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git F: Documentation/devicetree/bindings/net/can/ F: drivers/net/can/ +F: include/linux/can/bittiming.h F: include/linux/can/dev.h F: include/linux/can/led.h F: include/linux/can/platform/ diff --git a/drivers/net/can/dev/Makefile b/drivers/net/can/dev/Makefile index cba92e6bcf6f..b5c6bb848d9d 100644 --- a/drivers/net/can/dev/Makefile +++ b/drivers/net/can/dev/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_CAN_DEV) += can-dev.o +can-dev-y += bittiming.o can-dev-y += dev.o can-dev-y += rx-offload.o diff --git a/drivers/net/can/dev/bittiming.c b/drivers/net/can/dev/bittiming.c new file mode 100644 index 000000000000..f7fe226bb395 --- /dev/null +++ b/drivers/net/can/dev/bittiming.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (C) 2005 Marc Kleine-Budde, Pengutronix + * Copyright (C) 2006 Andrey Volkov, Varma Electronics + * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com> + */ + +#include <linux/can/dev.h> + +#ifdef CONFIG_CAN_CALC_BITTIMING +#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */ + +/* Bit-timing calculation derived from: + * + * Code based on LinCAN sources and H8S2638 project + * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz + * Copyright 2005 Stanislav Marek + * email: pisa@cmp.felk.cvut.cz + * + * Calculates proper bit-timing parameters for a specified bit-rate + * and sample-point, which can then be used to set the bit-timing + * registers of the CAN controller. You can find more information + * in the header file linux/can/netlink.h. + */ +static int +can_update_sample_point(const struct can_bittiming_const *btc, + unsigned int sample_point_nominal, unsigned int tseg, + unsigned int *tseg1_ptr, unsigned int *tseg2_ptr, + unsigned int *sample_point_error_ptr) +{ + unsigned int sample_point_error, best_sample_point_error = UINT_MAX; + unsigned int sample_point, best_sample_point = 0; + unsigned int tseg1, tseg2; + int i; + + for (i = 0; i <= 1; i++) { + tseg2 = tseg + CAN_SYNC_SEG - + (sample_point_nominal * (tseg + CAN_SYNC_SEG)) / + 1000 - i; + tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max); + tseg1 = tseg - tseg2; + if (tseg1 > btc->tseg1_max) { + tseg1 = btc->tseg1_max; + tseg2 = tseg - tseg1; + } + + sample_point = 1000 * (tseg + CAN_SYNC_SEG - tseg2) / + (tseg + CAN_SYNC_SEG); + sample_point_error = abs(sample_point_nominal - sample_point); + + if (sample_point <= sample_point_nominal && + sample_point_error < best_sample_point_error) { + best_sample_point = sample_point; + best_sample_point_error = sample_point_error; + *tseg1_ptr = tseg1; + *tseg2_ptr = tseg2; + } + } + + if (sample_point_error_ptr) + *sample_point_error_ptr = best_sample_point_error; + + return best_sample_point; +} + +int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc) +{ + struct can_priv *priv = netdev_priv(dev); + unsigned int bitrate; /* current bitrate */ + unsigned int bitrate_error; /* difference between current and nominal value */ + unsigned int best_bitrate_error = UINT_MAX; + unsigned int sample_point_error; /* difference between current and nominal value */ + unsigned int best_sample_point_error = UINT_MAX; + unsigned int sample_point_nominal; /* nominal sample point */ + unsigned int best_tseg = 0; /* current best value for tseg */ + unsigned int best_brp = 0; /* current best value for brp */ + unsigned int brp, tsegall, tseg, tseg1 = 0, tseg2 = 0; + u64 v64; + + /* Use CiA recommended sample points */ + if (bt->sample_point) { + sample_point_nominal = bt->sample_point; + } else { + if (bt->bitrate > 800000) + sample_point_nominal = 750; + else if (bt->bitrate > 500000) + sample_point_nominal = 800; + else + sample_point_nominal = 875; + } + + /* tseg even = round down, odd = round up */ + for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1; + tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) { + tsegall = CAN_SYNC_SEG + tseg / 2; + + /* Compute all possible tseg choices (tseg=tseg1+tseg2) */ + brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2; + + /* choose brp step which is possible in system */ + brp = (brp / btc->brp_inc) * btc->brp_inc; + if (brp < btc->brp_min || brp > btc->brp_max) + continue; + + bitrate = priv->clock.freq / (brp * tsegall); + bitrate_error = abs(bt->bitrate - bitrate); + + /* tseg brp biterror */ + if (bitrate_error > best_bitrate_error) + continue; + + /* reset sample point error if we have a better bitrate */ + if (bitrate_error < best_bitrate_error) + best_sample_point_error = UINT_MAX; + + can_update_sample_point(btc, sample_point_nominal, tseg / 2, + &tseg1, &tseg2, &sample_point_error); + if (sample_point_error > best_sample_point_error) + continue; + + best_sample_point_error = sample_point_error; + best_bitrate_error = bitrate_error; + best_tseg = tseg / 2; + best_brp = brp; + + if (bitrate_error == 0 && sample_point_error == 0) + break; + } + + if (best_bitrate_error) { + /* Error in one-tenth of a percent */ + v64 = (u64)best_bitrate_error * 1000; + do_div(v64, bt->bitrate); + bitrate_error = (u32)v64; + if (bitrate_error > CAN_CALC_MAX_ERROR) { + netdev_err(dev, + "bitrate error %d.%d%% too high\n", + bitrate_error / 10, bitrate_error % 10); + return -EDOM; + } + netdev_warn(dev, "bitrate error %d.%d%%\n", + bitrate_error / 10, bitrate_error % 10); + } + + /* real sample point */ + bt->sample_point = can_update_sample_point(btc, sample_point_nominal, + best_tseg, &tseg1, &tseg2, + NULL); + + v64 = (u64)best_brp * 1000 * 1000 * 1000; + do_div(v64, priv->clock.freq); + bt->tq = (u32)v64; + bt->prop_seg = tseg1 / 2; + bt->phase_seg1 = tseg1 - bt->prop_seg; + bt->phase_seg2 = tseg2; + + /* check for sjw user settings */ + if (!bt->sjw || !btc->sjw_max) { + bt->sjw = 1; + } else { + /* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */ + if (bt->sjw > btc->sjw_max) + bt->sjw = btc->sjw_max; + /* bt->sjw must not be higher than tseg2 */ + if (tseg2 < bt->sjw) + bt->sjw = tseg2; + } + + bt->brp = best_brp; + + /* real bitrate */ + bt->bitrate = priv->clock.freq / + (bt->brp * (CAN_SYNC_SEG + tseg1 + tseg2)); + + return 0; +} +#endif /* CONFIG_CAN_CALC_BITTIMING */ + +/* Checks the validity of the specified bit-timing parameters prop_seg, + * phase_seg1, phase_seg2 and sjw and tries to determine the bitrate + * prescaler value brp. You can find more information in the header + * file linux/can/netlink.h. + */ +static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc) +{ + struct can_priv *priv = netdev_priv(dev); + int tseg1, alltseg; + u64 brp64; + + tseg1 = bt->prop_seg + bt->phase_seg1; + if (!bt->sjw) + bt->sjw = 1; + if (bt->sjw > btc->sjw_max || + tseg1 < btc->tseg1_min || tseg1 > btc->tseg1_max || + bt->phase_seg2 < btc->tseg2_min || bt->phase_seg2 > btc->tseg2_max) + return -ERANGE; + + brp64 = (u64)priv->clock.freq * (u64)bt->tq; + if (btc->brp_inc > 1) + do_div(brp64, btc->brp_inc); + brp64 += 500000000UL - 1; + do_div(brp64, 1000000000UL); /* the practicable BRP */ + if (btc->brp_inc > 1) + brp64 *= btc->brp_inc; + bt->brp = (u32)brp64; + + if (bt->brp < btc->brp_min || bt->brp > btc->brp_max) + return -EINVAL; + + alltseg = bt->prop_seg + bt->phase_seg1 + bt->phase_seg2 + 1; + bt->bitrate = priv->clock.freq / (bt->brp * alltseg); + bt->sample_point = ((tseg1 + 1) * 1000) / alltseg; + + return 0; +} + +/* Checks the validity of predefined bitrate settings */ +static int +can_validate_bitrate(struct net_device *dev, struct can_bittiming *bt, + const u32 *bitrate_const, + const unsigned int bitrate_const_cnt) +{ + struct can_priv *priv = netdev_priv(dev); + unsigned int i; + + for (i = 0; i < bitrate_const_cnt; i++) { + if (bt->bitrate == bitrate_const[i]) + break; + } + + if (i >= priv->bitrate_const_cnt) + return -EINVAL; + + return 0; +} + +int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc, + const u32 *bitrate_const, + const unsigned int bitrate_const_cnt) +{ + int err; + + /* Depending on the given can_bittiming parameter structure the CAN + * timing parameters are calculated based on the provided bitrate OR + * alternatively the CAN timing parameters (tq, prop_seg, etc.) are + * provided directly which are then checked and fixed up. + */ + if (!bt->tq && bt->bitrate && btc) + err = can_calc_bittiming(dev, bt, btc); + else if (bt->tq && !bt->bitrate && btc) + err = can_fixup_bittiming(dev, bt, btc); + else if (!bt->tq && bt->bitrate && bitrate_const) + err = can_validate_bitrate(dev, bt, bitrate_const, + bitrate_const_cnt); + else + err = -EINVAL; + + return err; +} diff --git a/drivers/net/can/dev/dev.c b/drivers/net/can/dev/dev.c index 3486704c8a95..1b3ab95b3fd1 100644 --- a/drivers/net/can/dev/dev.c +++ b/drivers/net/can/dev/dev.c @@ -58,267 +58,6 @@ u8 can_fd_len2dlc(u8 len) } EXPORT_SYMBOL_GPL(can_fd_len2dlc); -#ifdef CONFIG_CAN_CALC_BITTIMING -#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */ - -/* Bit-timing calculation derived from: - * - * Code based on LinCAN sources and H8S2638 project - * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz - * Copyright 2005 Stanislav Marek - * email: pisa@cmp.felk.cvut.cz - * - * Calculates proper bit-timing parameters for a specified bit-rate - * and sample-point, which can then be used to set the bit-timing - * registers of the CAN controller. You can find more information - * in the header file linux/can/netlink.h. - */ -static int -can_update_sample_point(const struct can_bittiming_const *btc, - unsigned int sample_point_nominal, unsigned int tseg, - unsigned int *tseg1_ptr, unsigned int *tseg2_ptr, - unsigned int *sample_point_error_ptr) -{ - unsigned int sample_point_error, best_sample_point_error = UINT_MAX; - unsigned int sample_point, best_sample_point = 0; - unsigned int tseg1, tseg2; - int i; - - for (i = 0; i <= 1; i++) { - tseg2 = tseg + CAN_SYNC_SEG - - (sample_point_nominal * (tseg + CAN_SYNC_SEG)) / - 1000 - i; - tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max); - tseg1 = tseg - tseg2; - if (tseg1 > btc->tseg1_max) { - tseg1 = btc->tseg1_max; - tseg2 = tseg - tseg1; - } - - sample_point = 1000 * (tseg + CAN_SYNC_SEG - tseg2) / - (tseg + CAN_SYNC_SEG); - sample_point_error = abs(sample_point_nominal - sample_point); - - if (sample_point <= sample_point_nominal && - sample_point_error < best_sample_point_error) { - best_sample_point = sample_point; - best_sample_point_error = sample_point_error; - *tseg1_ptr = tseg1; - *tseg2_ptr = tseg2; - } - } - - if (sample_point_error_ptr) - *sample_point_error_ptr = best_sample_point_error; - - return best_sample_point; -} - -static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt, - const struct can_bittiming_const *btc) -{ - struct can_priv *priv = netdev_priv(dev); - unsigned int bitrate; /* current bitrate */ - unsigned int bitrate_error; /* difference between current and nominal value */ - unsigned int best_bitrate_error = UINT_MAX; - unsigned int sample_point_error; /* difference between current and nominal value */ - unsigned int best_sample_point_error = UINT_MAX; - unsigned int sample_point_nominal; /* nominal sample point */ - unsigned int best_tseg = 0; /* current best value for tseg */ - unsigned int best_brp = 0; /* current best value for brp */ - unsigned int brp, tsegall, tseg, tseg1 = 0, tseg2 = 0; - u64 v64; - - /* Use CiA recommended sample points */ - if (bt->sample_point) { - sample_point_nominal = bt->sample_point; - } else { - if (bt->bitrate > 800000) - sample_point_nominal = 750; - else if (bt->bitrate > 500000) - sample_point_nominal = 800; - else - sample_point_nominal = 875; - } - - /* tseg even = round down, odd = round up */ - for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1; - tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) { - tsegall = CAN_SYNC_SEG + tseg / 2; - - /* Compute all possible tseg choices (tseg=tseg1+tseg2) */ - brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2; - - /* choose brp step which is possible in system */ - brp = (brp / btc->brp_inc) * btc->brp_inc; - if (brp < btc->brp_min || brp > btc->brp_max) - continue; - - bitrate = priv->clock.freq / (brp * tsegall); - bitrate_error = abs(bt->bitrate - bitrate); - - /* tseg brp biterror */ - if (bitrate_error > best_bitrate_error) - continue; - - /* reset sample point error if we have a better bitrate */ - if (bitrate_error < best_bitrate_error) - best_sample_point_error = UINT_MAX; - - can_update_sample_point(btc, sample_point_nominal, tseg / 2, - &tseg1, &tseg2, &sample_point_error); - if (sample_point_error > best_sample_point_error) - continue; - - best_sample_point_error = sample_point_error; - best_bitrate_error = bitrate_error; - best_tseg = tseg / 2; - best_brp = brp; - - if (bitrate_error == 0 && sample_point_error == 0) - break; - } - - if (best_bitrate_error) { - /* Error in one-tenth of a percent */ - v64 = (u64)best_bitrate_error * 1000; - do_div(v64, bt->bitrate); - bitrate_error = (u32)v64; - if (bitrate_error > CAN_CALC_MAX_ERROR) { - netdev_err(dev, - "bitrate error %d.%d%% too high\n", - bitrate_error / 10, bitrate_error % 10); - return -EDOM; - } - netdev_warn(dev, "bitrate error %d.%d%%\n", - bitrate_error / 10, bitrate_error % 10); - } - - /* real sample point */ - bt->sample_point = can_update_sample_point(btc, sample_point_nominal, - best_tseg, &tseg1, &tseg2, - NULL); - - v64 = (u64)best_brp * 1000 * 1000 * 1000; - do_div(v64, priv->clock.freq); - bt->tq = (u32)v64; - bt->prop_seg = tseg1 / 2; - bt->phase_seg1 = tseg1 - bt->prop_seg; - bt->phase_seg2 = tseg2; - - /* check for sjw user settings */ - if (!bt->sjw || !btc->sjw_max) { - bt->sjw = 1; - } else { - /* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */ - if (bt->sjw > btc->sjw_max) - bt->sjw = btc->sjw_max; - /* bt->sjw must not be higher than tseg2 */ - if (tseg2 < bt->sjw) - bt->sjw = tseg2; - } - - bt->brp = best_brp; - - /* real bitrate */ - bt->bitrate = priv->clock.freq / - (bt->brp * (CAN_SYNC_SEG + tseg1 + tseg2)); - - return 0; -} -#else /* !CONFIG_CAN_CALC_BITTIMING */ -static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt, - const struct can_bittiming_const *btc) -{ - netdev_err(dev, "bit-timing calculation not available\n"); - return -EINVAL; -} -#endif /* CONFIG_CAN_CALC_BITTIMING */ - -/* Checks the validity of the specified bit-timing parameters prop_seg, - * phase_seg1, phase_seg2 and sjw and tries to determine the bitrate - * prescaler value brp. You can find more information in the header - * file linux/can/netlink.h. - */ -static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt, - const struct can_bittiming_const *btc) -{ - struct can_priv *priv = netdev_priv(dev); - int tseg1, alltseg; - u64 brp64; - - tseg1 = bt->prop_seg + bt->phase_seg1; - if (!bt->sjw) - bt->sjw = 1; - if (bt->sjw > btc->sjw_max || - tseg1 < btc->tseg1_min || tseg1 > btc->tseg1_max || - bt->phase_seg2 < btc->tseg2_min || bt->phase_seg2 > btc->tseg2_max) - return -ERANGE; - - brp64 = (u64)priv->clock.freq * (u64)bt->tq; - if (btc->brp_inc > 1) - do_div(brp64, btc->brp_inc); - brp64 += 500000000UL - 1; - do_div(brp64, 1000000000UL); /* the practicable BRP */ - if (btc->brp_inc > 1) - brp64 *= btc->brp_inc; - bt->brp = (u32)brp64; - - if (bt->brp < btc->brp_min || bt->brp > btc->brp_max) - return -EINVAL; - - alltseg = bt->prop_seg + bt->phase_seg1 + bt->phase_seg2 + 1; - bt->bitrate = priv->clock.freq / (bt->brp * alltseg); - bt->sample_point = ((tseg1 + 1) * 1000) / alltseg; - - return 0; -} - -/* Checks the validity of predefined bitrate settings */ -static int -can_validate_bitrate(struct net_device *dev, struct can_bittiming *bt, - const u32 *bitrate_const, - const unsigned int bitrate_const_cnt) -{ - struct can_priv *priv = netdev_priv(dev); - unsigned int i; - - for (i = 0; i < bitrate_const_cnt; i++) { - if (bt->bitrate == bitrate_const[i]) - break; - } - - if (i >= priv->bitrate_const_cnt) - return -EINVAL; - - return 0; -} - -static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt, - const struct can_bittiming_const *btc, - const u32 *bitrate_const, - const unsigned int bitrate_const_cnt) -{ - int err; - - /* Depending on the given can_bittiming parameter structure the CAN - * timing parameters are calculated based on the provided bitrate OR - * alternatively the CAN timing parameters (tq, prop_seg, etc.) are - * provided directly which are then checked and fixed up. - */ - if (!bt->tq && bt->bitrate && btc) - err = can_calc_bittiming(dev, bt, btc); - else if (bt->tq && !bt->bitrate && btc) - err = can_fixup_bittiming(dev, bt, btc); - else if (!bt->tq && bt->bitrate && bitrate_const) - err = can_validate_bitrate(dev, bt, bitrate_const, - bitrate_const_cnt); - else - err = -EINVAL; - - return err; -} - static void can_update_state_error_stats(struct net_device *dev, enum can_state new_state) { diff --git a/include/linux/can/bittiming.h b/include/linux/can/bittiming.h new file mode 100644 index 000000000000..707575c668f4 --- /dev/null +++ b/include/linux/can/bittiming.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (c) 2020 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de> + */ + +#ifndef _CAN_BITTIMING_H +#define _CAN_BITTIMING_H + +#include <linux/netdevice.h> +#include <linux/can/netlink.h> + +#define CAN_SYNC_SEG 1 + +#ifdef CONFIG_CAN_CALC_BITTIMING +int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc); +#else /* !CONFIG_CAN_CALC_BITTIMING */ +static inline int +can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc) +{ + netdev_err(dev, "bit-timing calculation not available\n"); + return -EINVAL; +} +#endif /* CONFIG_CAN_CALC_BITTIMING */ + +int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc, + const u32 *bitrate_const, + const unsigned int bitrate_const_cnt); + +/* + * can_bit_time() - Duration of one bit + * + * Please refer to ISO 11898-1:2015, section 11.3.1.1 "Bit time" for + * additional information. + * + * Return: the number of time quanta in one bit. + */ +static inline unsigned int can_bit_time(const struct can_bittiming *bt) +{ + return CAN_SYNC_SEG + bt->prop_seg + bt->phase_seg1 + bt->phase_seg2; +} + +#endif /* !_CAN_BITTIMING_H */ diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index 197a79535cc2..054c3bed190b 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -15,6 +15,7 @@ #define _CAN_DEV_H #include <linux/can.h> +#include <linux/can/bittiming.h> #include <linux/can/error.h> #include <linux/can/led.h> #include <linux/can/netlink.h> @@ -82,21 +83,6 @@ struct can_priv { #endif }; -#define CAN_SYNC_SEG 1 - -/* - * can_bit_time() - Duration of one bit - * - * Please refer to ISO 11898-1:2015, section 11.3.1.1 "Bit time" for - * additional information. - * - * Return: the number of time quanta in one bit. - */ -static inline unsigned int can_bit_time(const struct can_bittiming *bt) -{ - return CAN_SYNC_SEG + bt->prop_seg + bt->phase_seg1 + bt->phase_seg2; -} - /* * can_cc_dlc2len(value) - convert a given data length code (dlc) of a * Classical CAN frame into a valid data length of max. 8 bytes.

[net-next,04/17] can: dev: move bittiming related code into seperate file

Checks

Commit Message

Patch