diff mbox series

[net-next,v3,3/7] ethtool: Expose the number of lanes in use

Message ID 20210120093713.4000363-4-danieller@nvidia.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series Support setting lanes via ethtool | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 4 maintainers not CCed: meirl@mellanox.com dmurphy@ti.com ayal@mellanox.com linux@rempel-privat.de
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 1 this patch: 1
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 23 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 1 this patch: 1
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Danielle Ratson Jan. 20, 2021, 9:37 a.m. UTC
Currently, ethtool does not expose how many lanes are used when the
link is up.

After adding a possibility to advertise or force a specific number of
lanes, the lanes in use value can be either the maximum width of the port
or below.

Extend ethtool to expose the number of lanes currently in use for
drivers that support it.

For example:

$ ethtool -s swp1 speed 100000 lanes 4
$ ethtool -s swp2 speed 100000 lanes 4
$ ip link set swp1 up
$ ip link set swp2 up
$ ethtool swp1
Settings for swp1:
        Supported ports: [ FIBRE         Backplane ]
        Supported link modes:   1000baseT/Full
                                10000baseT/Full
                                1000baseKX/Full
                                10000baseKR/Full
                                10000baseR_FEC
                                40000baseKR4/Full
                                40000baseCR4/Full
                                40000baseSR4/Full
                                40000baseLR4/Full
                                25000baseCR/Full
                                25000baseKR/Full
                                25000baseSR/Full
                                50000baseCR2/Full
                                50000baseKR2/Full
                                100000baseKR4/Full
                                100000baseSR4/Full
                                100000baseCR4/Full
                                100000baseLR4_ER4/Full
                                50000baseSR2/Full
                                10000baseCR/Full
                                10000baseSR/Full
                                10000baseLR/Full
                                10000baseER/Full
                                50000baseKR/Full
                                50000baseSR/Full
                                50000baseCR/Full
                                50000baseLR_ER_FR/Full
                                50000baseDR/Full
                                100000baseKR2/Full
                                100000baseSR2/Full
                                100000baseCR2/Full
                                100000baseLR2_ER2_FR2/Full
                                100000baseDR2/Full
                                200000baseKR4/Full
                                200000baseSR4/Full
                                200000baseLR4_ER4_FR4/Full
                                200000baseDR4/Full
                                200000baseCR4/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Supported FEC modes: Not reported
        Advertised link modes:  1000baseT/Full
                                10000baseT/Full
                                1000baseKX/Full
                                1000baseKX/Full
                                10000baseKR/Full
                                10000baseR_FEC
                                40000baseKR4/Full
                                40000baseCR4/Full
                                40000baseSR4/Full
                                40000baseLR4/Full
                                25000baseCR/Full
                                25000baseKR/Full
                                25000baseSR/Full
                                50000baseCR2/Full
                                50000baseKR2/Full
                                100000baseKR4/Full
                                100000baseSR4/Full
                                100000baseCR4/Full
                                100000baseLR4_ER4/Full
                                50000baseSR2/Full
                                10000baseCR/Full
                                10000baseSR/Full
                                10000baseLR/Full
                                10000baseER/Full
                                200000baseKR4/Full
                                200000baseSR4/Full
                                200000baseLR4_ER4_FR4/Full
                                200000baseDR4/Full
                                200000baseCR4/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Advertised FEC modes: Not reported
        Advertised link modes:  100000baseKR4/Full
                                100000baseSR4/Full
                                100000baseCR4/Full
                                100000baseLR4_ER4/Full
	Advertised pause frame use: No
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Speed: 100000Mb/s
	Lanes: 4
	Duplex: Full
	Auto-negotiation: on
	Port: Direct Attach Copper
	PHYAD: 0
	Transceiver: internal
	Link detected: yes

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
---

Notes:
    v3:
    	* Change the condition for supporting the lanes parameter.
    
    v2:
    	* Reword commit message.
    	* Since now we get a link mode from driver, instead of each
    	  parameter separately, simply derive lanes from it.

 net/ethtool/linkmodes.c | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/net/ethtool/linkmodes.c b/net/ethtool/linkmodes.c
index caf9111c5270..0c18f8eda63d 100644
--- a/net/ethtool/linkmodes.c
+++ b/net/ethtool/linkmodes.c
@@ -45,6 +45,9 @@  static int linkmodes_prepare_data(const struct ethnl_req_info *req_base,
 		goto out;
 	}
 
+	if (!dev->ethtool_ops->cap_link_lanes_supported)
+		data->ksettings.lanes = ETHTOOL_LANES_UNKNOWN;
+
 	data->peer_empty =
 		bitmap_empty(data->ksettings.link_modes.lp_advertising,
 			     __ETHTOOL_LINK_MODE_MASK_NBITS);
@@ -65,6 +68,7 @@  static int linkmodes_reply_size(const struct ethnl_req_info *req_base,
 
 	len = nla_total_size(sizeof(u8)) /* LINKMODES_AUTONEG */
 		+ nla_total_size(sizeof(u32)) /* LINKMODES_SPEED */
+		+ nla_total_size(sizeof(u32)) /* LINKMODES_LANES */
 		+ nla_total_size(sizeof(u8)) /* LINKMODES_DUPLEX */
 		+ 0;
 	ret = ethnl_bitset_size(ksettings->link_modes.advertising,
@@ -122,6 +126,7 @@  static int linkmodes_fill_reply(struct sk_buff *skb,
 	}
 
 	if (nla_put_u32(skb, ETHTOOL_A_LINKMODES_SPEED, lsettings->speed) ||
+	    nla_put_u32(skb, ETHTOOL_A_LINKMODES_LANES, ksettings->lanes) ||
 	    nla_put_u8(skb, ETHTOOL_A_LINKMODES_DUPLEX, lsettings->duplex))
 		return -EMSGSIZE;