| Message ID | 20210128134130.3051-3-elic@nvidia.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | Fix failure to hot add memory | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
On 2021/1/28 下午9:41, Eli Cohen wrote: > When a change of memory map occurs, the hardware resources are destroyed > and then re-created again with the new memory map. In such case, we need > to restore the hardware available and used indices. The driver failed to > restore the used index which is added here. > > Fixes 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") > Signed-off-by: Eli Cohen <elic@nvidia.com> A question. Does this mean after a vq is suspended, the hw used index is not equal to vq used index? Thanks > --- > drivers/vdpa/mlx5/net/mlx5_vnet.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c > index 549ded074ff3..3fc8588cecae 100644 > --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c > +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c > @@ -87,6 +87,7 @@ struct mlx5_vq_restore_info { > u64 device_addr; > u64 driver_addr; > u16 avail_index; > + u16 used_index; > bool ready; > struct vdpa_callback cb; > bool restore; > @@ -121,6 +122,7 @@ struct mlx5_vdpa_virtqueue { > u32 virtq_id; > struct mlx5_vdpa_net *ndev; > u16 avail_idx; > + u16 used_idx; > int fw_state; > > /* keep last in the struct */ > @@ -804,6 +806,7 @@ static int create_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtque > > obj_context = MLX5_ADDR_OF(create_virtio_net_q_in, in, obj_context); > MLX5_SET(virtio_net_q_object, obj_context, hw_available_index, mvq->avail_idx); > + MLX5_SET(virtio_net_q_object, obj_context, hw_used_index, mvq->used_idx); > MLX5_SET(virtio_net_q_object, obj_context, queue_feature_bit_mask_12_3, > get_features_12_3(ndev->mvdev.actual_features)); > vq_ctx = MLX5_ADDR_OF(virtio_net_q_object, obj_context, virtio_q_context); > @@ -1022,6 +1025,7 @@ static int connect_qps(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *m > struct mlx5_virtq_attr { > u8 state; > u16 available_index; > + u16 used_index; > }; > > static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *mvq, > @@ -1052,6 +1056,7 @@ static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueu > memset(attr, 0, sizeof(*attr)); > attr->state = MLX5_GET(virtio_net_q_object, obj_context, state); > attr->available_index = MLX5_GET(virtio_net_q_object, obj_context, hw_available_index); > + attr->used_index = MLX5_GET(virtio_net_q_object, obj_context, hw_used_index); > kfree(out); > return 0; > > @@ -1602,6 +1607,7 @@ static int save_channel_info(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqu > return err; > > ri->avail_index = attr.available_index; > + ri->used_index = attr.used_index; > ri->ready = mvq->ready; > ri->num_ent = mvq->num_ent; > ri->desc_addr = mvq->desc_addr; > @@ -1646,6 +1652,7 @@ static void restore_channels_info(struct mlx5_vdpa_net *ndev) > continue; > > mvq->avail_idx = ri->avail_index; > + mvq->used_idx = ri->used_index; > mvq->ready = ri->ready; > mvq->num_ent = ri->num_ent; > mvq->desc_addr = ri->desc_addr;
On Fri, Jan 29, 2021 at 11:49:45AM +0800, Jason Wang wrote: > > On 2021/1/28 下午9:41, Eli Cohen wrote: > > When a change of memory map occurs, the hardware resources are destroyed > > and then re-created again with the new memory map. In such case, we need > > to restore the hardware available and used indices. The driver failed to > > restore the used index which is added here. > > > > Fixes 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") > > Signed-off-by: Eli Cohen <elic@nvidia.com> > > > A question. Does this mean after a vq is suspended, the hw used index is not > equal to vq used index? Surely there is just one "Used index" for a VQ. What I was trying to say is that after the VQ is suspended, I read the used index by querying the hardware. The read result is the used index that the hardware wrote to memory. After the I create the new hardware object, I need to tell it what is the used index (and the available index) as a way to sync it with the existing VQ. This sync is especially important when a change of map occurs while the VQ was already used (hence the indices are likely to be non zero). This can be triggered by hot adding memory after the VQs have been used. > > Thanks > > > > --- > > drivers/vdpa/mlx5/net/mlx5_vnet.c | 7 +++++++ > > 1 file changed, 7 insertions(+) > > > > diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c > > index 549ded074ff3..3fc8588cecae 100644 > > --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c > > +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c > > @@ -87,6 +87,7 @@ struct mlx5_vq_restore_info { > > u64 device_addr; > > u64 driver_addr; > > u16 avail_index; > > + u16 used_index; > > bool ready; > > struct vdpa_callback cb; > > bool restore; > > @@ -121,6 +122,7 @@ struct mlx5_vdpa_virtqueue { > > u32 virtq_id; > > struct mlx5_vdpa_net *ndev; > > u16 avail_idx; > > + u16 used_idx; > > int fw_state; > > /* keep last in the struct */ > > @@ -804,6 +806,7 @@ static int create_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtque > > obj_context = MLX5_ADDR_OF(create_virtio_net_q_in, in, obj_context); > > MLX5_SET(virtio_net_q_object, obj_context, hw_available_index, mvq->avail_idx); > > + MLX5_SET(virtio_net_q_object, obj_context, hw_used_index, mvq->used_idx); > > MLX5_SET(virtio_net_q_object, obj_context, queue_feature_bit_mask_12_3, > > get_features_12_3(ndev->mvdev.actual_features)); > > vq_ctx = MLX5_ADDR_OF(virtio_net_q_object, obj_context, virtio_q_context); > > @@ -1022,6 +1025,7 @@ static int connect_qps(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *m > > struct mlx5_virtq_attr { > > u8 state; > > u16 available_index; > > + u16 used_index; > > }; > > static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *mvq, > > @@ -1052,6 +1056,7 @@ static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueu > > memset(attr, 0, sizeof(*attr)); > > attr->state = MLX5_GET(virtio_net_q_object, obj_context, state); > > attr->available_index = MLX5_GET(virtio_net_q_object, obj_context, hw_available_index); > > + attr->used_index = MLX5_GET(virtio_net_q_object, obj_context, hw_used_index); > > kfree(out); > > return 0; > > @@ -1602,6 +1607,7 @@ static int save_channel_info(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqu > > return err; > > ri->avail_index = attr.available_index; > > + ri->used_index = attr.used_index; > > ri->ready = mvq->ready; > > ri->num_ent = mvq->num_ent; > > ri->desc_addr = mvq->desc_addr; > > @@ -1646,6 +1652,7 @@ static void restore_channels_info(struct mlx5_vdpa_net *ndev) > > continue; > > mvq->avail_idx = ri->avail_index; > > + mvq->used_idx = ri->used_index; > > mvq->ready = ri->ready; > > mvq->num_ent = ri->num_ent; > > mvq->desc_addr = ri->desc_addr; >
On 2021/2/1 上午2:55, Eli Cohen wrote: > On Fri, Jan 29, 2021 at 11:49:45AM +0800, Jason Wang wrote: >> On 2021/1/28 下午9:41, Eli Cohen wrote: >>> When a change of memory map occurs, the hardware resources are destroyed >>> and then re-created again with the new memory map. In such case, we need >>> to restore the hardware available and used indices. The driver failed to >>> restore the used index which is added here. >>> >>> Fixes 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") >>> Signed-off-by: Eli Cohen <elic@nvidia.com> >> >> A question. Does this mean after a vq is suspended, the hw used index is not >> equal to vq used index? > Surely there is just one "Used index" for a VQ. What I was trying to say > is that after the VQ is suspended, I read the used index by querying the > hardware. The read result is the used index that the hardware wrote to > memory. Just to make sure I understand here. So it looks to me we had two index. The first is the used index which is stored in the memory/virtqueue, the second is the one that is stored by the device. > After the I create the new hardware object, I need to tell it > what is the used index (and the available index) as a way to sync it > with the existing VQ. For avail index I understand that the hardware index is not synced with the avail index stored in the memory/virtqueue. The question is used index, if the hardware one is not synced with the one in the virtqueue. It means after vq is suspended, some requests is not completed by the hardware (e.g the buffer were not put to used ring). This may have implications to live migration, it means those unaccomplished requests needs to be migrated to the destination and resubmitted to the device. This looks not easy. Thanks > > This sync is especially important when a change of map occurs while the > VQ was already used (hence the indices are likely to be non zero). This > can be triggered by hot adding memory after the VQs have been used. > >> Thanks >> >> >>> --- >>> drivers/vdpa/mlx5/net/mlx5_vnet.c | 7 +++++++ >>> 1 file changed, 7 insertions(+) >>> >>> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c >>> index 549ded074ff3..3fc8588cecae 100644 >>> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c >>> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c >>> @@ -87,6 +87,7 @@ struct mlx5_vq_restore_info { >>> u64 device_addr; >>> u64 driver_addr; >>> u16 avail_index; >>> + u16 used_index; >>> bool ready; >>> struct vdpa_callback cb; >>> bool restore; >>> @@ -121,6 +122,7 @@ struct mlx5_vdpa_virtqueue { >>> u32 virtq_id; >>> struct mlx5_vdpa_net *ndev; >>> u16 avail_idx; >>> + u16 used_idx; >>> int fw_state; >>> /* keep last in the struct */ >>> @@ -804,6 +806,7 @@ static int create_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtque >>> obj_context = MLX5_ADDR_OF(create_virtio_net_q_in, in, obj_context); >>> MLX5_SET(virtio_net_q_object, obj_context, hw_available_index, mvq->avail_idx); >>> + MLX5_SET(virtio_net_q_object, obj_context, hw_used_index, mvq->used_idx); >>> MLX5_SET(virtio_net_q_object, obj_context, queue_feature_bit_mask_12_3, >>> get_features_12_3(ndev->mvdev.actual_features)); >>> vq_ctx = MLX5_ADDR_OF(virtio_net_q_object, obj_context, virtio_q_context); >>> @@ -1022,6 +1025,7 @@ static int connect_qps(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *m >>> struct mlx5_virtq_attr { >>> u8 state; >>> u16 available_index; >>> + u16 used_index; >>> }; >>> static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *mvq, >>> @@ -1052,6 +1056,7 @@ static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueu >>> memset(attr, 0, sizeof(*attr)); >>> attr->state = MLX5_GET(virtio_net_q_object, obj_context, state); >>> attr->available_index = MLX5_GET(virtio_net_q_object, obj_context, hw_available_index); >>> + attr->used_index = MLX5_GET(virtio_net_q_object, obj_context, hw_used_index); >>> kfree(out); >>> return 0; >>> @@ -1602,6 +1607,7 @@ static int save_channel_info(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqu >>> return err; >>> ri->avail_index = attr.available_index; >>> + ri->used_index = attr.used_index; >>> ri->ready = mvq->ready; >>> ri->num_ent = mvq->num_ent; >>> ri->desc_addr = mvq->desc_addr; >>> @@ -1646,6 +1652,7 @@ static void restore_channels_info(struct mlx5_vdpa_net *ndev) >>> continue; >>> mvq->avail_idx = ri->avail_index; >>> + mvq->used_idx = ri->used_index; >>> mvq->ready = ri->ready; >>> mvq->num_ent = ri->num_ent; >>> mvq->desc_addr = ri->desc_addr;
On Mon, Feb 01, 2021 at 11:36:23AM +0800, Jason Wang wrote: > > On 2021/2/1 上午2:55, Eli Cohen wrote: > > On Fri, Jan 29, 2021 at 11:49:45AM +0800, Jason Wang wrote: > > > On 2021/1/28 下午9:41, Eli Cohen wrote: > > > > When a change of memory map occurs, the hardware resources are destroyed > > > > and then re-created again with the new memory map. In such case, we need > > > > to restore the hardware available and used indices. The driver failed to > > > > restore the used index which is added here. > > > > > > > > Fixes 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") > > > > Signed-off-by: Eli Cohen <elic@nvidia.com> > > > > > > A question. Does this mean after a vq is suspended, the hw used index is not > > > equal to vq used index? > > Surely there is just one "Used index" for a VQ. What I was trying to say > > is that after the VQ is suspended, I read the used index by querying the > > hardware. The read result is the used index that the hardware wrote to > > memory. > > > Just to make sure I understand here. So it looks to me we had two index. The > first is the used index which is stored in the memory/virtqueue, the second > is the one that is stored by the device. > It is the structures defined in the virtio spec in 2.6.6 for the available ring and 2.6.8 for the used ring. As you know these the available ring is written to by the driver and read by the device. The opposite happens for the used index. The reason I need to restore the last known indices is for the new hardware objects to sync on the last state and take over from there. > > > After the I create the new hardware object, I need to tell it > > what is the used index (and the available index) as a way to sync it > > with the existing VQ. > > > For avail index I understand that the hardware index is not synced with the > avail index stored in the memory/virtqueue. The question is used index, if > the hardware one is not synced with the one in the virtqueue. It means after > vq is suspended, some requests is not completed by the hardware (e.g the > buffer were not put to used ring). > > This may have implications to live migration, it means those unaccomplished > requests needs to be migrated to the destination and resubmitted to the > device. This looks not easy. > > Thanks > > > > > > This sync is especially important when a change of map occurs while the > > VQ was already used (hence the indices are likely to be non zero). This > > can be triggered by hot adding memory after the VQs have been used. > > > > > Thanks > > > > > > > > > > --- > > > > drivers/vdpa/mlx5/net/mlx5_vnet.c | 7 +++++++ > > > > 1 file changed, 7 insertions(+) > > > > > > > > diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c > > > > index 549ded074ff3..3fc8588cecae 100644 > > > > --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c > > > > +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c > > > > @@ -87,6 +87,7 @@ struct mlx5_vq_restore_info { > > > > u64 device_addr; > > > > u64 driver_addr; > > > > u16 avail_index; > > > > + u16 used_index; > > > > bool ready; > > > > struct vdpa_callback cb; > > > > bool restore; > > > > @@ -121,6 +122,7 @@ struct mlx5_vdpa_virtqueue { > > > > u32 virtq_id; > > > > struct mlx5_vdpa_net *ndev; > > > > u16 avail_idx; > > > > + u16 used_idx; > > > > int fw_state; > > > > /* keep last in the struct */ > > > > @@ -804,6 +806,7 @@ static int create_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtque > > > > obj_context = MLX5_ADDR_OF(create_virtio_net_q_in, in, obj_context); > > > > MLX5_SET(virtio_net_q_object, obj_context, hw_available_index, mvq->avail_idx); > > > > + MLX5_SET(virtio_net_q_object, obj_context, hw_used_index, mvq->used_idx); > > > > MLX5_SET(virtio_net_q_object, obj_context, queue_feature_bit_mask_12_3, > > > > get_features_12_3(ndev->mvdev.actual_features)); > > > > vq_ctx = MLX5_ADDR_OF(virtio_net_q_object, obj_context, virtio_q_context); > > > > @@ -1022,6 +1025,7 @@ static int connect_qps(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *m > > > > struct mlx5_virtq_attr { > > > > u8 state; > > > > u16 available_index; > > > > + u16 used_index; > > > > }; > > > > static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *mvq, > > > > @@ -1052,6 +1056,7 @@ static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueu > > > > memset(attr, 0, sizeof(*attr)); > > > > attr->state = MLX5_GET(virtio_net_q_object, obj_context, state); > > > > attr->available_index = MLX5_GET(virtio_net_q_object, obj_context, hw_available_index); > > > > + attr->used_index = MLX5_GET(virtio_net_q_object, obj_context, hw_used_index); > > > > kfree(out); > > > > return 0; > > > > @@ -1602,6 +1607,7 @@ static int save_channel_info(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqu > > > > return err; > > > > ri->avail_index = attr.available_index; > > > > + ri->used_index = attr.used_index; > > > > ri->ready = mvq->ready; > > > > ri->num_ent = mvq->num_ent; > > > > ri->desc_addr = mvq->desc_addr; > > > > @@ -1646,6 +1652,7 @@ static void restore_channels_info(struct mlx5_vdpa_net *ndev) > > > > continue; > > > > mvq->avail_idx = ri->avail_index; > > > > + mvq->used_idx = ri->used_index; > > > > mvq->ready = ri->ready; > > > > mvq->num_ent = ri->num_ent; > > > > mvq->desc_addr = ri->desc_addr; >
On 2021/2/1 下午1:52, Eli Cohen wrote: > On Mon, Feb 01, 2021 at 11:36:23AM +0800, Jason Wang wrote: >> On 2021/2/1 上午2:55, Eli Cohen wrote: >>> On Fri, Jan 29, 2021 at 11:49:45AM +0800, Jason Wang wrote: >>>> On 2021/1/28 下午9:41, Eli Cohen wrote: >>>>> When a change of memory map occurs, the hardware resources are destroyed >>>>> and then re-created again with the new memory map. In such case, we need >>>>> to restore the hardware available and used indices. The driver failed to >>>>> restore the used index which is added here. >>>>> >>>>> Fixes 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") >>>>> Signed-off-by: Eli Cohen <elic@nvidia.com> >>>> A question. Does this mean after a vq is suspended, the hw used index is not >>>> equal to vq used index? >>> Surely there is just one "Used index" for a VQ. What I was trying to say >>> is that after the VQ is suspended, I read the used index by querying the >>> hardware. The read result is the used index that the hardware wrote to >>> memory. >> >> Just to make sure I understand here. So it looks to me we had two index. The >> first is the used index which is stored in the memory/virtqueue, the second >> is the one that is stored by the device. >> > It is the structures defined in the virtio spec in 2.6.6 for the > available ring and 2.6.8 for the used ring. As you know these the > available ring is written to by the driver and read by the device. The > opposite happens for the used index. Right, so for used index it was wrote by device. And the device should have an internal used index value that is used to write to the used ring. And the code is used to sync the device internal used index if I understand this correctly. > The reason I need to restore the last known indices is for the new > hardware objects to sync on the last state and take over from there. Right, after the vq suspending, the questions are: 1) is hardware internal used index might not be the same with the used index in the virtqueue? or 2) can we simply sync the virtqueue's used index to the hardware's used index? Thanks > >>> After the I create the new hardware object, I need to tell it >>> what is the used index (and the available index) as a way to sync it >>> with the existing VQ. >> >> For avail index I understand that the hardware index is not synced with the >> avail index stored in the memory/virtqueue. The question is used index, if >> the hardware one is not synced with the one in the virtqueue. It means after >> vq is suspended, some requests is not completed by the hardware (e.g the >> buffer were not put to used ring). >> >> This may have implications to live migration, it means those unaccomplished >> requests needs to be migrated to the destination and resubmitted to the >> device. This looks not easy. >> >> Thanks >> >> >>> This sync is especially important when a change of map occurs while the >>> VQ was already used (hence the indices are likely to be non zero). This >>> can be triggered by hot adding memory after the VQs have been used. >>> >>>> Thanks >>>> >>>> >>>>> --- >>>>> drivers/vdpa/mlx5/net/mlx5_vnet.c | 7 +++++++ >>>>> 1 file changed, 7 insertions(+) >>>>> >>>>> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c >>>>> index 549ded074ff3..3fc8588cecae 100644 >>>>> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c >>>>> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c >>>>> @@ -87,6 +87,7 @@ struct mlx5_vq_restore_info { >>>>> u64 device_addr; >>>>> u64 driver_addr; >>>>> u16 avail_index; >>>>> + u16 used_index; >>>>> bool ready; >>>>> struct vdpa_callback cb; >>>>> bool restore; >>>>> @@ -121,6 +122,7 @@ struct mlx5_vdpa_virtqueue { >>>>> u32 virtq_id; >>>>> struct mlx5_vdpa_net *ndev; >>>>> u16 avail_idx; >>>>> + u16 used_idx; >>>>> int fw_state; >>>>> /* keep last in the struct */ >>>>> @@ -804,6 +806,7 @@ static int create_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtque >>>>> obj_context = MLX5_ADDR_OF(create_virtio_net_q_in, in, obj_context); >>>>> MLX5_SET(virtio_net_q_object, obj_context, hw_available_index, mvq->avail_idx); >>>>> + MLX5_SET(virtio_net_q_object, obj_context, hw_used_index, mvq->used_idx); >>>>> MLX5_SET(virtio_net_q_object, obj_context, queue_feature_bit_mask_12_3, >>>>> get_features_12_3(ndev->mvdev.actual_features)); >>>>> vq_ctx = MLX5_ADDR_OF(virtio_net_q_object, obj_context, virtio_q_context); >>>>> @@ -1022,6 +1025,7 @@ static int connect_qps(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *m >>>>> struct mlx5_virtq_attr { >>>>> u8 state; >>>>> u16 available_index; >>>>> + u16 used_index; >>>>> }; >>>>> static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *mvq, >>>>> @@ -1052,6 +1056,7 @@ static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueu >>>>> memset(attr, 0, sizeof(*attr)); >>>>> attr->state = MLX5_GET(virtio_net_q_object, obj_context, state); >>>>> attr->available_index = MLX5_GET(virtio_net_q_object, obj_context, hw_available_index); >>>>> + attr->used_index = MLX5_GET(virtio_net_q_object, obj_context, hw_used_index); >>>>> kfree(out); >>>>> return 0; >>>>> @@ -1602,6 +1607,7 @@ static int save_channel_info(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqu >>>>> return err; >>>>> ri->avail_index = attr.available_index; >>>>> + ri->used_index = attr.used_index; >>>>> ri->ready = mvq->ready; >>>>> ri->num_ent = mvq->num_ent; >>>>> ri->desc_addr = mvq->desc_addr; >>>>> @@ -1646,6 +1652,7 @@ static void restore_channels_info(struct mlx5_vdpa_net *ndev) >>>>> continue; >>>>> mvq->avail_idx = ri->avail_index; >>>>> + mvq->used_idx = ri->used_index; >>>>> mvq->ready = ri->ready; >>>>> mvq->num_ent = ri->num_ent; >>>>> mvq->desc_addr = ri->desc_addr;
On Mon, Feb 01, 2021 at 02:00:35PM +0800, Jason Wang wrote: > > On 2021/2/1 下午1:52, Eli Cohen wrote: > > On Mon, Feb 01, 2021 at 11:36:23AM +0800, Jason Wang wrote: > > > On 2021/2/1 上午2:55, Eli Cohen wrote: > > > > On Fri, Jan 29, 2021 at 11:49:45AM +0800, Jason Wang wrote: > > > > > On 2021/1/28 下午9:41, Eli Cohen wrote: > > > > > > When a change of memory map occurs, the hardware resources are destroyed > > > > > > and then re-created again with the new memory map. In such case, we need > > > > > > to restore the hardware available and used indices. The driver failed to > > > > > > restore the used index which is added here. > > > > > > > > > > > > Fixes 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") > > > > > > Signed-off-by: Eli Cohen <elic@nvidia.com> > > > > > A question. Does this mean after a vq is suspended, the hw used index is not > > > > > equal to vq used index? > > > > Surely there is just one "Used index" for a VQ. What I was trying to say > > > > is that after the VQ is suspended, I read the used index by querying the > > > > hardware. The read result is the used index that the hardware wrote to > > > > memory. > > > > > > Just to make sure I understand here. So it looks to me we had two index. The > > > first is the used index which is stored in the memory/virtqueue, the second > > > is the one that is stored by the device. > > > > > It is the structures defined in the virtio spec in 2.6.6 for the > > available ring and 2.6.8 for the used ring. As you know these the > > available ring is written to by the driver and read by the device. The > > opposite happens for the used index. > > > Right, so for used index it was wrote by device. And the device should have > an internal used index value that is used to write to the used ring. And the > code is used to sync the device internal used index if I understand this > correctly. > > > > The reason I need to restore the last known indices is for the new > > hardware objects to sync on the last state and take over from there. > > > Right, after the vq suspending, the questions are: > > 1) is hardware internal used index might not be the same with the used index > in the virtqueue? > Generally the answer is no because the hardware is the only one writing it. New objects start up with the initial value configured to them upon creation. This value was zero before this change. You could argue that since the hardware has access to virtqueue memory, it could just read the value from there but it does not. > or > > 2) can we simply sync the virtqueue's used index to the hardware's used > index? > Theoretically it could be done but that's not how the hardware works. One reason is that is not supposed to read from that area. But it is really hardware implementation detail. > > > > > > After the I create the new hardware object, I need to tell it > > > > what is the used index (and the available index) as a way to sync it > > > > with the existing VQ. > > > > > > For avail index I understand that the hardware index is not synced with the > > > avail index stored in the memory/virtqueue. The question is used index, if > > > the hardware one is not synced with the one in the virtqueue. It means after > > > vq is suspended, some requests is not completed by the hardware (e.g the > > > buffer were not put to used ring). > > > > > > This may have implications to live migration, it means those unaccomplished > > > requests needs to be migrated to the destination and resubmitted to the > > > device. This looks not easy. > > > > > > Thanks > > > > > > > > > > This sync is especially important when a change of map occurs while the > > > > VQ was already used (hence the indices are likely to be non zero). This > > > > can be triggered by hot adding memory after the VQs have been used. > > > > > > > > > Thanks > > > > > > > > > > > > > > > > --- > > > > > > drivers/vdpa/mlx5/net/mlx5_vnet.c | 7 +++++++ > > > > > > 1 file changed, 7 insertions(+) > > > > > > > > > > > > diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c > > > > > > index 549ded074ff3..3fc8588cecae 100644 > > > > > > --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c > > > > > > +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c > > > > > > @@ -87,6 +87,7 @@ struct mlx5_vq_restore_info { > > > > > > u64 device_addr; > > > > > > u64 driver_addr; > > > > > > u16 avail_index; > > > > > > + u16 used_index; > > > > > > bool ready; > > > > > > struct vdpa_callback cb; > > > > > > bool restore; > > > > > > @@ -121,6 +122,7 @@ struct mlx5_vdpa_virtqueue { > > > > > > u32 virtq_id; > > > > > > struct mlx5_vdpa_net *ndev; > > > > > > u16 avail_idx; > > > > > > + u16 used_idx; > > > > > > int fw_state; > > > > > > /* keep last in the struct */ > > > > > > @@ -804,6 +806,7 @@ static int create_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtque > > > > > > obj_context = MLX5_ADDR_OF(create_virtio_net_q_in, in, obj_context); > > > > > > MLX5_SET(virtio_net_q_object, obj_context, hw_available_index, mvq->avail_idx); > > > > > > + MLX5_SET(virtio_net_q_object, obj_context, hw_used_index, mvq->used_idx); > > > > > > MLX5_SET(virtio_net_q_object, obj_context, queue_feature_bit_mask_12_3, > > > > > > get_features_12_3(ndev->mvdev.actual_features)); > > > > > > vq_ctx = MLX5_ADDR_OF(virtio_net_q_object, obj_context, virtio_q_context); > > > > > > @@ -1022,6 +1025,7 @@ static int connect_qps(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *m > > > > > > struct mlx5_virtq_attr { > > > > > > u8 state; > > > > > > u16 available_index; > > > > > > + u16 used_index; > > > > > > }; > > > > > > static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *mvq, > > > > > > @@ -1052,6 +1056,7 @@ static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueu > > > > > > memset(attr, 0, sizeof(*attr)); > > > > > > attr->state = MLX5_GET(virtio_net_q_object, obj_context, state); > > > > > > attr->available_index = MLX5_GET(virtio_net_q_object, obj_context, hw_available_index); > > > > > > + attr->used_index = MLX5_GET(virtio_net_q_object, obj_context, hw_used_index); > > > > > > kfree(out); > > > > > > return 0; > > > > > > @@ -1602,6 +1607,7 @@ static int save_channel_info(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqu > > > > > > return err; > > > > > > ri->avail_index = attr.available_index; > > > > > > + ri->used_index = attr.used_index; > > > > > > ri->ready = mvq->ready; > > > > > > ri->num_ent = mvq->num_ent; > > > > > > ri->desc_addr = mvq->desc_addr; > > > > > > @@ -1646,6 +1652,7 @@ static void restore_channels_info(struct mlx5_vdpa_net *ndev) > > > > > > continue; > > > > > > mvq->avail_idx = ri->avail_index; > > > > > > + mvq->used_idx = ri->used_index; > > > > > > mvq->ready = ri->ready; > > > > > > mvq->num_ent = ri->num_ent; > > > > > > mvq->desc_addr = ri->desc_addr; >
On 2021/2/1 下午2:38, Eli Cohen wrote: > On Mon, Feb 01, 2021 at 02:00:35PM +0800, Jason Wang wrote: >> On 2021/2/1 下午1:52, Eli Cohen wrote: >>> On Mon, Feb 01, 2021 at 11:36:23AM +0800, Jason Wang wrote: >>>> On 2021/2/1 上午2:55, Eli Cohen wrote: >>>>> On Fri, Jan 29, 2021 at 11:49:45AM +0800, Jason Wang wrote: >>>>>> On 2021/1/28 下午9:41, Eli Cohen wrote: >>>>>>> When a change of memory map occurs, the hardware resources are destroyed >>>>>>> and then re-created again with the new memory map. In such case, we need >>>>>>> to restore the hardware available and used indices. The driver failed to >>>>>>> restore the used index which is added here. >>>>>>> >>>>>>> Fixes 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") >>>>>>> Signed-off-by: Eli Cohen <elic@nvidia.com> >>>>>> A question. Does this mean after a vq is suspended, the hw used index is not >>>>>> equal to vq used index? >>>>> Surely there is just one "Used index" for a VQ. What I was trying to say >>>>> is that after the VQ is suspended, I read the used index by querying the >>>>> hardware. The read result is the used index that the hardware wrote to >>>>> memory. >>>> Just to make sure I understand here. So it looks to me we had two index. The >>>> first is the used index which is stored in the memory/virtqueue, the second >>>> is the one that is stored by the device. >>>> >>> It is the structures defined in the virtio spec in 2.6.6 for the >>> available ring and 2.6.8 for the used ring. As you know these the >>> available ring is written to by the driver and read by the device. The >>> opposite happens for the used index. >> >> Right, so for used index it was wrote by device. And the device should have >> an internal used index value that is used to write to the used ring. And the >> code is used to sync the device internal used index if I understand this >> correctly. >> >> >>> The reason I need to restore the last known indices is for the new >>> hardware objects to sync on the last state and take over from there. >> >> Right, after the vq suspending, the questions are: >> >> 1) is hardware internal used index might not be the same with the used index >> in the virtqueue? >> > Generally the answer is no because the hardware is the only one writing > it. New objects start up with the initial value configured to them upon > creation. This value was zero before this change. > You could argue that since the hardware has access to virtqueue memory, > it could just read the value from there but it does not. I see. > >> or >> >> 2) can we simply sync the virtqueue's used index to the hardware's used >> index? >> > Theoretically it could be done but that's not how the hardware works. > One reason is that is not supposed to read from that area. But it is > really hardware implementation detail. I get you now. So Acked-by: Jason Wang <jasowang@redhat.com> Thanks >>>>> After the I create the new hardware object, I need to tell it >>>>> what is the used index (and the available index) as a way to sync it >>>>> with the existing VQ. >>>> For avail index I understand that the hardware index is not synced with the >>>> avail index stored in the memory/virtqueue. The question is used index, if >>>> the hardware one is not synced with the one in the virtqueue. It means after >>>> vq is suspended, some requests is not completed by the hardware (e.g the >>>> buffer were not put to used ring). >>>> >>>> This may have implications to live migration, it means those unaccomplished >>>> requests needs to be migrated to the destination and resubmitted to the >>>> device. This looks not easy. >>>> >>>> Thanks >>>> >>>> >>>>> This sync is especially important when a change of map occurs while the >>>>> VQ was already used (hence the indices are likely to be non zero). This >>>>> can be triggered by hot adding memory after the VQs have been used. >>>>> >>>>>> Thanks >>>>>> >>>>>> >>>>>>> --- >>>>>>> drivers/vdpa/mlx5/net/mlx5_vnet.c | 7 +++++++ >>>>>>> 1 file changed, 7 insertions(+) >>>>>>> >>>>>>> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c >>>>>>> index 549ded074ff3..3fc8588cecae 100644 >>>>>>> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c >>>>>>> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c >>>>>>> @@ -87,6 +87,7 @@ struct mlx5_vq_restore_info { >>>>>>> u64 device_addr; >>>>>>> u64 driver_addr; >>>>>>> u16 avail_index; >>>>>>> + u16 used_index; >>>>>>> bool ready; >>>>>>> struct vdpa_callback cb; >>>>>>> bool restore; >>>>>>> @@ -121,6 +122,7 @@ struct mlx5_vdpa_virtqueue { >>>>>>> u32 virtq_id; >>>>>>> struct mlx5_vdpa_net *ndev; >>>>>>> u16 avail_idx; >>>>>>> + u16 used_idx; >>>>>>> int fw_state; >>>>>>> /* keep last in the struct */ >>>>>>> @@ -804,6 +806,7 @@ static int create_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtque >>>>>>> obj_context = MLX5_ADDR_OF(create_virtio_net_q_in, in, obj_context); >>>>>>> MLX5_SET(virtio_net_q_object, obj_context, hw_available_index, mvq->avail_idx); >>>>>>> + MLX5_SET(virtio_net_q_object, obj_context, hw_used_index, mvq->used_idx); >>>>>>> MLX5_SET(virtio_net_q_object, obj_context, queue_feature_bit_mask_12_3, >>>>>>> get_features_12_3(ndev->mvdev.actual_features)); >>>>>>> vq_ctx = MLX5_ADDR_OF(virtio_net_q_object, obj_context, virtio_q_context); >>>>>>> @@ -1022,6 +1025,7 @@ static int connect_qps(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *m >>>>>>> struct mlx5_virtq_attr { >>>>>>> u8 state; >>>>>>> u16 available_index; >>>>>>> + u16 used_index; >>>>>>> }; >>>>>>> static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *mvq, >>>>>>> @@ -1052,6 +1056,7 @@ static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueu >>>>>>> memset(attr, 0, sizeof(*attr)); >>>>>>> attr->state = MLX5_GET(virtio_net_q_object, obj_context, state); >>>>>>> attr->available_index = MLX5_GET(virtio_net_q_object, obj_context, hw_available_index); >>>>>>> + attr->used_index = MLX5_GET(virtio_net_q_object, obj_context, hw_used_index); >>>>>>> kfree(out); >>>>>>> return 0; >>>>>>> @@ -1602,6 +1607,7 @@ static int save_channel_info(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqu >>>>>>> return err; >>>>>>> ri->avail_index = attr.available_index; >>>>>>> + ri->used_index = attr.used_index; >>>>>>> ri->ready = mvq->ready; >>>>>>> ri->num_ent = mvq->num_ent; >>>>>>> ri->desc_addr = mvq->desc_addr; >>>>>>> @@ -1646,6 +1652,7 @@ static void restore_channels_info(struct mlx5_vdpa_net *ndev) >>>>>>> continue; >>>>>>> mvq->avail_idx = ri->avail_index; >>>>>>> + mvq->used_idx = ri->used_index; >>>>>>> mvq->ready = ri->ready; >>>>>>> mvq->num_ent = ri->num_ent; >>>>>>> mvq->desc_addr = ri->desc_addr;
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c index 549ded074ff3..3fc8588cecae 100644 --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c @@ -87,6 +87,7 @@ struct mlx5_vq_restore_info { u64 device_addr; u64 driver_addr; u16 avail_index; + u16 used_index; bool ready; struct vdpa_callback cb; bool restore; @@ -121,6 +122,7 @@ struct mlx5_vdpa_virtqueue { u32 virtq_id; struct mlx5_vdpa_net *ndev; u16 avail_idx; + u16 used_idx; int fw_state; /* keep last in the struct */ @@ -804,6 +806,7 @@ static int create_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtque obj_context = MLX5_ADDR_OF(create_virtio_net_q_in, in, obj_context); MLX5_SET(virtio_net_q_object, obj_context, hw_available_index, mvq->avail_idx); + MLX5_SET(virtio_net_q_object, obj_context, hw_used_index, mvq->used_idx); MLX5_SET(virtio_net_q_object, obj_context, queue_feature_bit_mask_12_3, get_features_12_3(ndev->mvdev.actual_features)); vq_ctx = MLX5_ADDR_OF(virtio_net_q_object, obj_context, virtio_q_context); @@ -1022,6 +1025,7 @@ static int connect_qps(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *m struct mlx5_virtq_attr { u8 state; u16 available_index; + u16 used_index; }; static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *mvq, @@ -1052,6 +1056,7 @@ static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueu memset(attr, 0, sizeof(*attr)); attr->state = MLX5_GET(virtio_net_q_object, obj_context, state); attr->available_index = MLX5_GET(virtio_net_q_object, obj_context, hw_available_index); + attr->used_index = MLX5_GET(virtio_net_q_object, obj_context, hw_used_index); kfree(out); return 0; @@ -1602,6 +1607,7 @@ static int save_channel_info(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqu return err; ri->avail_index = attr.available_index; + ri->used_index = attr.used_index; ri->ready = mvq->ready; ri->num_ent = mvq->num_ent; ri->desc_addr = mvq->desc_addr; @@ -1646,6 +1652,7 @@ static void restore_channels_info(struct mlx5_vdpa_net *ndev) continue; mvq->avail_idx = ri->avail_index; + mvq->used_idx = ri->used_index; mvq->ready = ri->ready; mvq->num_ent = ri->num_ent; mvq->desc_addr = ri->desc_addr;
When a change of memory map occurs, the hardware resources are destroyed and then re-created again with the new memory map. In such case, we need to restore the hardware available and used indices. The driver failed to restore the used index which is added here. Fixes 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen <elic@nvidia.com> --- drivers/vdpa/mlx5/net/mlx5_vnet.c | 7 +++++++ 1 file changed, 7 insertions(+)