[v1,6/7] ARM: imx6sx: remove Atheros AR8031 PHY fixup

Commit Message

Oleksij Rempel Feb. 3, 2021, 9:18 a.m. UTC

If this patch breaks your system, enable AT803X_PHY driver and add a PHY
node to the board device tree:

	phy-connection-type = "rgmii-txid"; (or rgmii-id)
	ethernet-phy@X {
		reg = <0xX>;

		qca,clk-out-frequency = <125000000>;

		vddio-supply = <&vddh>;

		vddio: vddio-regulator {
			regulator-name = "VDDIO";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
		};

		vddh: vddh-regulator {
			regulator-name = "VDDH";
		};
	};

Signed-off-by: Oleksij Rempel <[e-mail]>
---
 arch/arm/mach-imx/mach-imx6sx.c | 26 --------------------------
 1 file changed, 26 deletions(-)

Patch

diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 781e2a94fdd7..e65ed5218f53 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -15,31 +15,6 @@ 
 #include "common.h"
 #include "cpuidle.h"
 
-static int ar8031_phy_fixup(struct phy_device *dev)
-{
-	u16 val;
-
-	/* Set RGMII IO voltage to 1.8V */
-	phy_write(dev, 0x1d, 0x1f);
-	phy_write(dev, 0x1e, 0x8);
-
-	/* introduce tx clock delay */
-	phy_write(dev, 0x1d, 0x5);
-	val = phy_read(dev, 0x1e);
-	val |= 0x0100;
-	phy_write(dev, 0x1e, val);
-
-	return 0;
-}
-
-#define PHY_ID_AR8031   0x004dd074
-static void __init imx6sx_enet_phy_init(void)
-{
-	if (IS_BUILTIN(CONFIG_PHYLIB))
-		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
-					   ar8031_phy_fixup);
-}
-
 static void __init imx6sx_enet_clk_sel(void)
 {
 	struct regmap *gpr;
@@ -57,7 +32,6 @@  static void __init imx6sx_enet_clk_sel(void)
 
 static inline void imx6sx_enet_init(void)
 {
-	imx6sx_enet_phy_init();
 	imx6sx_enet_clk_sel();
 }