diff mbox series

[net-next,V2,10/17] net/mlx5e: Refactor reg_c1 usage

Message ID 20210206050240.48410-11-saeed@kernel.org (mailing list archive)
State Accepted
Commit 48d216e5596a58e3cfa6d4548343f982c5921b79
Delegated to: Netdev Maintainers
Headers show
Series [net-next,V2,01/17] net/mlx5: E-Switch, Refactor setting source port | expand

Checks

Context Check Description
netdev/cover_letter success Pull request
netdev/fixes_present success Link
netdev/patch_count warning Series longer than 15 patches
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 10 maintainers not CCed: paulb@mellanox.com maord@nvidia.com lariel@mellanox.com wenxu@ucloud.cn jianbol@mellanox.com elibr@mellanox.com pablo@netfilter.org ozsh@nvidia.com leon@kernel.org linux-rdma@vger.kernel.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 2 this patch: 2
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 88 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 2 this patch: 2
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Saeed Mahameed Feb. 6, 2021, 5:02 a.m. UTC 
From: Vlad Buslov <vladbu@nvidia.com>

Following patch in series uses reg_c1 in eswitch code. To use reg_c1
helpers in both TC and eswitch code, refactor existing helpers according to
similar use case of reg_c0 and move the functionality into eswitch.h.
Calculate reg mappings length from new defines to ensure that they are
always in sync and only need to be changed in single place.

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../ethernet/mellanox/mlx5/core/en/rep/tc.c   |  4 ++--
 .../ethernet/mellanox/mlx5/core/en/tc_ct.h    |  6 ++----
 .../net/ethernet/mellanox/mlx5/core/en_tc.c   |  4 ++--
 .../net/ethernet/mellanox/mlx5/core/en_tc.h   |  2 +-
 include/linux/mlx5/eswitch.h                  | 19 +++++++++++++++++++
 5 files changed, 26 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c
index 76177f7c5ec2..14bcebd4a0b6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c
@@ -651,7 +651,7 @@  bool mlx5e_rep_tc_update_skb(struct mlx5_cqe64 *cqe,
 
 		tc_skb_ext->chain = chain;
 
-		zone_restore_id = reg_c1 & ZONE_RESTORE_MAX;
+		zone_restore_id = reg_c1 & ESW_ZONE_ID_MASK;
 
 		uplink_rpriv = mlx5_eswitch_get_uplink_priv(esw, REP_ETH);
 		uplink_priv = &uplink_rpriv->uplink_priv;
@@ -660,7 +660,7 @@  bool mlx5e_rep_tc_update_skb(struct mlx5_cqe64 *cqe,
 			return false;
 	}
 
-	tunnel_id = reg_c1 >> REG_MAPPING_SHIFT(TUNNEL_TO_REG);
+	tunnel_id = reg_c1 >> ESW_TUN_OFFSET;
 	return mlx5e_restore_tunnel(priv, skb, tc_priv, tunnel_id);
 #endif /* CONFIG_NET_TC_SKB_EXT */
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.h b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.h
index 6503b614337c..69e618d17071 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.h
@@ -73,7 +73,7 @@  struct mlx5_ct_attr {
 #define zone_restore_to_reg_ct {\
 	.mfield = MLX5_ACTION_IN_FIELD_METADATA_REG_C_1,\
 	.moffset = 0,\
-	.mlen = 1,\
+	.mlen = (ESW_ZONE_ID_BITS / 8),\
 	.soffset = MLX5_BYTE_OFF(fte_match_param,\
 				 misc_parameters_2.metadata_reg_c_1) + 3,\
 }
@@ -81,14 +81,12 @@  struct mlx5_ct_attr {
 #define nic_zone_restore_to_reg_ct {\
 	.mfield = MLX5_ACTION_IN_FIELD_METADATA_REG_B,\
 	.moffset = 2,\
-	.mlen = 1,\
+	.mlen = (ESW_ZONE_ID_BITS / 8),\
 }
 
 #define REG_MAPPING_MLEN(reg) (mlx5e_tc_attr_to_reg_mappings[reg].mlen)
 #define REG_MAPPING_MOFFSET(reg) (mlx5e_tc_attr_to_reg_mappings[reg].moffset)
 #define REG_MAPPING_SHIFT(reg) (REG_MAPPING_MOFFSET(reg) * 8)
-#define ZONE_RESTORE_BITS (REG_MAPPING_MLEN(ZONE_RESTORE_TO_REG) * 8)
-#define ZONE_RESTORE_MAX GENMASK(ZONE_RESTORE_BITS - 1, 0)
 
 #if IS_ENABLED(CONFIG_MLX5_TC_CT)
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 098f3efa5d4d..90db5a99879d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -173,7 +173,7 @@  struct mlx5e_tc_attr_to_reg_mapping mlx5e_tc_attr_to_reg_mappings[] = {
 	[TUNNEL_TO_REG] = {
 		.mfield = MLX5_ACTION_IN_FIELD_METADATA_REG_C_1,
 		.moffset = 1,
-		.mlen = 3,
+		.mlen = ((ESW_TUN_OPTS_BITS + ESW_TUN_ID_BITS) / 8),
 		.soffset = MLX5_BYTE_OFF(fte_match_param,
 					 misc_parameters_2.metadata_reg_c_1),
 	},
@@ -5649,7 +5649,7 @@  bool mlx5e_tc_update_skb(struct mlx5_cqe64 *cqe,
 		tc_skb_ext->chain = chain;
 
 		zone_restore_id = (reg_b >> REG_MAPPING_SHIFT(NIC_ZONE_RESTORE_TO_REG)) &
-				  ZONE_RESTORE_MAX;
+			ESW_ZONE_ID_MASK;
 
 		if (!mlx5e_tc_ct_restore_flow(tc->ct, skb,
 					      zone_restore_id))
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.h b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.h
index ee0029192504..1e4ee02bfb1c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.h
@@ -302,7 +302,7 @@  static inline bool mlx5e_cqe_regb_chain(struct mlx5_cqe64 *cqe)
 
 	reg_b = be32_to_cpu(cqe->ft_metadata);
 
-	if (reg_b >> (MLX5E_TC_TABLE_CHAIN_TAG_BITS + ZONE_RESTORE_BITS))
+	if (reg_b >> (MLX5E_TC_TABLE_CHAIN_TAG_BITS + ESW_ZONE_ID_BITS))
 		return false;
 
 	chain = reg_b & MLX5E_TC_TABLE_CHAIN_TAG_MASK;
diff --git a/include/linux/mlx5/eswitch.h b/include/linux/mlx5/eswitch.h
index 67e341274a22..3b20e84049c1 100644
--- a/include/linux/mlx5/eswitch.h
+++ b/include/linux/mlx5/eswitch.h
@@ -98,6 +98,25 @@  u32 mlx5_eswitch_get_vport_metadata_for_match(struct mlx5_eswitch *esw,
 					      u16 vport_num);
 u32 mlx5_eswitch_get_vport_metadata_for_set(struct mlx5_eswitch *esw,
 					    u16 vport_num);
+
+/* Reg C1 usage:
+ * Reg C1 = < ESW_TUN_ID(12) | ESW_TUN_OPTS(12) | ESW_ZONE_ID(8) >
+ *
+ * Highest 12 bits of reg c1 is the encapsulation tunnel id, next 12 bits is
+ * encapsulation tunnel options, and the lowest 8 bits are used for zone id.
+ *
+ * Zone id is used to restore CT flow when packet misses on chain.
+ *
+ * Tunnel id and options are used together to restore the tunnel info metadata
+ * on miss and to support inner header rewrite by means of implicit chain 0
+ * flows.
+ */
+#define ESW_ZONE_ID_BITS 8
+#define ESW_TUN_OPTS_BITS 12
+#define ESW_TUN_ID_BITS 12
+#define ESW_TUN_OFFSET ESW_ZONE_ID_BITS
+#define ESW_ZONE_ID_MASK GENMASK(ESW_ZONE_ID_BITS - 1, 0)
+
 u8 mlx5_eswitch_mode(struct mlx5_core_dev *dev);
 #else  /* CONFIG_MLX5_ESWITCH */