diff mbox series

[net-next,v4,6/9] net: phy: icplus: don't set APS_EN bit on IP101G

Message ID 20210211074750.28674-7-michael@walle.cc (mailing list archive)
State Accepted
Commit eeac7d43d4dd037882a288edb1c9d41f31f142c1
Delegated to: Netdev Maintainers
Headers show
Series net: phy: icplus: cleanups and new features | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 55 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Michael Walle Feb. 11, 2021, 7:47 a.m. UTC 
This bit is reserved as 'always-write-1'. While this is not a particular
error, because we are only setting it, guard it by checking the model to
prevent errors in the future.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Changes since v3:
 - none

Changes since v2:
 - none

Changes since v1:
 - dropped the model check. Instead use two different functions.

 drivers/net/phy/icplus.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index dee4f4d988a2..bc2b58061507 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -208,10 +208,10 @@  static int ip101a_g_probe(struct phy_device *phydev)
 	return 0;
 }
 
-static int ip101a_g_config_init(struct phy_device *phydev)
+static int ip101a_g_config_intr_pin(struct phy_device *phydev)
 {
 	struct ip101a_g_phy_priv *priv = phydev->priv;
-	int err, c;
+	int err;
 
 	/* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */
 	switch (priv->sel_intr32) {
@@ -241,11 +241,24 @@  static int ip101a_g_config_init(struct phy_device *phydev)
 		break;
 	}
 
+	return 0;
+}
+
+static int ip101a_config_init(struct phy_device *phydev)
+{
+	int ret;
+
 	/* Enable Auto Power Saving mode */
-	c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
-	c |= IP101A_G_APS_ON;
+	ret = phy_set_bits(phydev, IP10XX_SPEC_CTRL_STATUS, IP101A_G_APS_ON);
+	if (ret)
+		return ret;
 
-	return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
+	return ip101a_g_config_intr_pin(phydev);
+}
+
+static int ip101g_config_init(struct phy_device *phydev)
+{
+	return ip101a_g_config_intr_pin(phydev);
 }
 
 static int ip101a_g_ack_interrupt(struct phy_device *phydev)
@@ -379,7 +392,7 @@  static struct phy_driver icplus_driver[] = {
 	.probe		= ip101a_g_probe,
 	.config_intr	= ip101a_g_config_intr,
 	.handle_interrupt = ip101a_g_handle_interrupt,
-	.config_init	= ip101a_g_config_init,
+	.config_init	= ip101a_config_init,
 	.soft_reset	= genphy_soft_reset,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
@@ -389,7 +402,7 @@  static struct phy_driver icplus_driver[] = {
 	.probe		= ip101a_g_probe,
 	.config_intr	= ip101a_g_config_intr,
 	.handle_interrupt = ip101a_g_handle_interrupt,
-	.config_init	= ip101a_g_config_init,
+	.config_init	= ip101g_config_init,
 	.soft_reset	= genphy_soft_reset,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,