diff mbox series

[net,05/15] net/mlx5e: Change interrupt moderation channel params also when channels are closed

Message ID 20210212025641.323844-6-saeed@kernel.org (mailing list archive)
State Accepted
Delegated to: Netdev Maintainers
Headers show
Series [net,01/15] net/mlx5e: E-switch, Fix rate calculation for overflow | expand

Checks

Context Check Description
netdev/cover_letter success Pull request
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net
netdev/subject_prefix success Link
netdev/cc_maintainers warning 4 maintainers not CCed: tariqt@mellanox.com linux-rdma@vger.kernel.org talgi@mellanox.com leon@kernel.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 44 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Saeed Mahameed Feb. 12, 2021, 2:56 a.m. UTC 
From: Maxim Mikityanskiy <maximmi@mellanox.com>

struct mlx5e_params contains fields ({rx,tx}_cq_moderation) that depend
on two things: whether DIM is enabled and the state of a private flag
(MLX5E_PFLAG_{RX,TX}_CQE_BASED_MODER). Whenever the DIM state changes,
mlx5e_reset_{rx,tx}_moderation is called to update the fields, however,
only if the channels are open. The flow where the channels are closed
misses the required update of the fields. This commit moves the calls of
mlx5e_reset_{rx,tx}_moderation, so that they run in both flows.

Fixes: ebeaf084ad5c ("net/mlx5e: Properly set default values when disabling adaptive moderation")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../ethernet/mellanox/mlx5/core/en_ethtool.c  | 29 +++++++++----------
 1 file changed, 14 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index d7ff5fa45cb7..8612c388db7d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -597,24 +597,9 @@  int mlx5e_ethtool_set_coalesce(struct mlx5e_priv *priv,
 	tx_moder->pkts    = coal->tx_max_coalesced_frames;
 	new_channels.params.tx_dim_enabled = !!coal->use_adaptive_tx_coalesce;
 
-	if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) {
-		priv->channels.params = new_channels.params;
-		goto out;
-	}
-	/* we are opened */
-
 	reset_rx = !!coal->use_adaptive_rx_coalesce != priv->channels.params.rx_dim_enabled;
 	reset_tx = !!coal->use_adaptive_tx_coalesce != priv->channels.params.tx_dim_enabled;
 
-	if (!reset_rx && !reset_tx) {
-		if (!coal->use_adaptive_rx_coalesce)
-			mlx5e_set_priv_channels_rx_coalesce(priv, coal);
-		if (!coal->use_adaptive_tx_coalesce)
-			mlx5e_set_priv_channels_tx_coalesce(priv, coal);
-		priv->channels.params = new_channels.params;
-		goto out;
-	}
-
 	if (reset_rx) {
 		u8 mode = MLX5E_GET_PFLAG(&new_channels.params,
 					  MLX5E_PFLAG_RX_CQE_BASED_MODER);
@@ -628,6 +613,20 @@  int mlx5e_ethtool_set_coalesce(struct mlx5e_priv *priv,
 		mlx5e_reset_tx_moderation(&new_channels.params, mode);
 	}
 
+	if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) {
+		priv->channels.params = new_channels.params;
+		goto out;
+	}
+
+	if (!reset_rx && !reset_tx) {
+		if (!coal->use_adaptive_rx_coalesce)
+			mlx5e_set_priv_channels_rx_coalesce(priv, coal);
+		if (!coal->use_adaptive_tx_coalesce)
+			mlx5e_set_priv_channels_tx_coalesce(priv, coal);
+		priv->channels.params = new_channels.params;
+		goto out;
+	}
+
 	err = mlx5e_safe_switch_channels(priv, &new_channels, NULL, NULL);
 
 out: