diff mbox series

drivers: net: xilinx_emaclite: remove arch limitation

Message ID 20210216223346.4198-1-gary@garyguo.net (mailing list archive)
State Accepted
Commit 18af77c50fede5b3fc22aa9f0a9b255a5c5285c9
Delegated to: Netdev Maintainers
Headers show
Series drivers: net: xilinx_emaclite: remove arch limitation | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Gary Guo Feb. 16, 2021, 10:33 p.m. UTC
The changes made in eccd540 is enough for xilinx_emaclite to run
without problem on 64-bit systems. I have tested it on a Xilinx
FPGA with RV64 softcore. The architecture limitation in Kconfig
seems no longer necessary.

A small change is included to print address with %lx instead of
casting to int and print with %x.

Signed-off-by: Gary Guo <gary@garyguo.net>
---
 drivers/net/ethernet/xilinx/Kconfig           | 1 -
 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 4 ++--
 2 files changed, 2 insertions(+), 3 deletions(-)

Comments

patchwork-bot+netdevbpf@kernel.org Feb. 16, 2021, 11 p.m. UTC | #1
Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Tue, 16 Feb 2021 22:33:42 +0000 you wrote:
> The changes made in eccd540 is enough for xilinx_emaclite to run
> without problem on 64-bit systems. I have tested it on a Xilinx
> FPGA with RV64 softcore. The architecture limitation in Kconfig
> seems no longer necessary.
> 
> A small change is included to print address with %lx instead of
> casting to int and print with %x.
> 
> [...]

Here is the summary with links:
  - drivers: net: xilinx_emaclite: remove arch limitation
    https://git.kernel.org/netdev/net-next/c/18af77c50fed

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index 3b2137d1f4c6..c6eb7f2368aa 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -18,7 +18,6 @@  if NET_VENDOR_XILINX
 
 config XILINX_EMACLITE
 	tristate "Xilinx 10/100 Ethernet Lite support"
-	depends on PPC32 || MICROBLAZE || ARCH_ZYNQ || MIPS || COMPILE_TEST
 	select PHYLIB
 	help
 	  This driver supports the 10/100 Ethernet Lite from Xilinx.
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 008b9a40faad..007840d4a807 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -1193,8 +1193,8 @@  static int xemaclite_of_probe(struct platform_device *ofdev)
 	}
 
 	dev_info(dev,
-		 "Xilinx EmacLite at 0x%08X mapped to 0x%08lX, irq=%d\n",
-		 (unsigned int __force)ndev->mem_start,
+		 "Xilinx EmacLite at 0x%08lX mapped to 0x%08lX, irq=%d\n",
+		 (unsigned long __force)ndev->mem_start,
 		 (unsigned long __force)lp->base_addr, ndev->irq);
 	return 0;