diff mbox series

[net-next,v4,1/3] net: phy: broadcom: Set proper 1000BaseX/SGMII interface mode for BCM54616S

Message ID 20210216225454.2944373-2-robert.hancock@calian.com (mailing list archive)
State Accepted
Commit 3afd0218992a8d1398e9791d6c2edd4c948ae7ee
Delegated to: Netdev Maintainers
Headers show
Series Broadcom PHY driver updates | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 8 of 8 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 12 this patch: 12
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 133 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 12 this patch: 12
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Robert Hancock Feb. 16, 2021, 10:54 p.m. UTC 
The default configuration for the BCM54616S PHY may not match the desired
mode when using 1000BaseX or SGMII interface modes, such as when it is on
an SFP module. Add code to explicitly set the correct mode using
programming sequences provided by Bel-Fuse:

https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-05-series.pdf
https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-06-series.pdf

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/broadcom.c | 84 ++++++++++++++++++++++++++++++++------
 include/linux/brcmphy.h    |  4 ++
 2 files changed, 76 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 91fbd26c809e..8e7fc3368380 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -103,6 +103,64 @@  static int bcm54612e_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int bcm54616s_config_init(struct phy_device *phydev)
+{
+	int rc, val;
+
+	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+	    phydev->interface != PHY_INTERFACE_MODE_1000BASEX)
+		return 0;
+
+	/* Ensure proper interface mode is selected. */
+	/* Disable RGMII mode */
+	val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	if (val < 0)
+		return val;
+	val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN;
+	val |= MII_BCM54XX_AUXCTL_MISC_WREN;
+	rc = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+				  val);
+	if (rc < 0)
+		return rc;
+
+	/* Select 1000BASE-X register set (primary SerDes) */
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_MODE);
+	if (val < 0)
+		return val;
+	val |= BCM54XX_SHD_MODE_1000BX;
+	rc = bcm_phy_write_shadow(phydev, BCM54XX_SHD_MODE, val);
+	if (rc < 0)
+		return rc;
+
+	/* Power down SerDes interface */
+	rc = phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN);
+	if (rc < 0)
+		return rc;
+
+	/* Select proper interface mode */
+	val &= ~BCM54XX_SHD_INTF_SEL_MASK;
+	val |= phydev->interface == PHY_INTERFACE_MODE_SGMII ?
+		BCM54XX_SHD_INTF_SEL_SGMII :
+		BCM54XX_SHD_INTF_SEL_GBIC;
+	rc = bcm_phy_write_shadow(phydev, BCM54XX_SHD_MODE, val);
+	if (rc < 0)
+		return rc;
+
+	/* Power up SerDes interface */
+	rc = phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN);
+	if (rc < 0)
+		return rc;
+
+	/* Select copper register set */
+	val &= ~BCM54XX_SHD_MODE_1000BX;
+	rc = bcm_phy_write_shadow(phydev, BCM54XX_SHD_MODE, val);
+	if (rc < 0)
+		return rc;
+
+	/* Power up copper interface */
+	return phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN);
+}
+
 /* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
 static int bcm50610_a0_workaround(struct phy_device *phydev)
 {
@@ -283,15 +341,17 @@  static int bcm54xx_config_init(struct phy_device *phydev)
 
 	bcm54xx_adjust_rxrefclk(phydev);
 
-	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E) {
+	switch (BRCM_PHY_MODEL(phydev)) {
+	case PHY_ID_BCM54210E:
 		err = bcm54210e_config_init(phydev);
-		if (err)
-			return err;
-	} else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54612E) {
+		break;
+	case PHY_ID_BCM54612E:
 		err = bcm54612e_config_init(phydev);
-		if (err)
-			return err;
-	} else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
+		break;
+	case PHY_ID_BCM54616S:
+		err = bcm54616s_config_init(phydev);
+		break;
+	case PHY_ID_BCM54810:
 		/* For BCM54810, we need to disable BroadR-Reach function */
 		val = bcm_phy_read_exp(phydev,
 				       BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
@@ -299,9 +359,10 @@  static int bcm54xx_config_init(struct phy_device *phydev)
 		err = bcm_phy_write_exp(phydev,
 					BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
 					val);
-		if (err < 0)
-			return err;
+		break;
 	}
+	if (err)
+		return err;
 
 	bcm54xx_phydsp_config(phydev);
 
@@ -390,7 +451,7 @@  struct bcm54616s_phy_priv {
 static int bcm54616s_probe(struct phy_device *phydev)
 {
 	struct bcm54616s_phy_priv *priv;
-	int val, intf_sel;
+	int val;
 
 	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -408,8 +469,7 @@  static int bcm54616s_probe(struct phy_device *phydev)
 	 * RGMII-1000Base-X is properly supported, but RGMII-100Base-FX
 	 * support is still missing as of now.
 	 */
-	intf_sel = (val & BCM54XX_SHD_INTF_SEL_MASK) >> 1;
-	if (intf_sel == 1) {
+	if ((val & BCM54XX_SHD_INTF_SEL_MASK) == BCM54XX_SHD_INTF_SEL_RGMII) {
 		val = bcm_phy_read_shadow(phydev, BCM54616S_SHD_100FX_CTRL);
 		if (val < 0)
 			return val;
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 8fe1d55371ac..c2c2147dfeb8 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -129,6 +129,7 @@ 
 
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC			0x07
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN	0x0010
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN	0x0080
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN	0x0100
 #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX		0x0200
 #define MII_BCM54XX_AUXCTL_MISC_WREN			0x8000
@@ -216,6 +217,9 @@ 
 /* 11111: Mode Control Register */
 #define BCM54XX_SHD_MODE		0x1f
 #define BCM54XX_SHD_INTF_SEL_MASK	GENMASK(2, 1)	/* INTERF_SEL[1:0] */
+#define BCM54XX_SHD_INTF_SEL_RGMII	0x02
+#define BCM54XX_SHD_INTF_SEL_SGMII	0x04
+#define BCM54XX_SHD_INTF_SEL_GBIC	0x06
 #define BCM54XX_SHD_MODE_1000BX		BIT(0)	/* Enable 1000-X registers */
 
 /*