@@ -272,6 +272,7 @@ void stmmac_disable_eee_mode(struct stmmac_priv *priv);
bool stmmac_eee_init(struct stmmac_priv *priv);
int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt);
int stmmac_reinit_ringparam(struct net_device *dev, u32 rx_size, u32 tx_size);
+int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled);
#if IS_ENABLED(CONFIG_STMMAC_SELFTESTS)
void stmmac_selftest_run(struct net_device *dev,
@@ -28,6 +28,7 @@
#include <linux/if_vlan.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
+#include <linux/pm_runtime.h>
#include <linux/prefetch.h>
#include <linux/pinctrl/consumer.h>
#ifdef CONFIG_DEBUG_FS
@@ -113,6 +114,28 @@ static void stmmac_exit_fs(struct net_device *dev);
#define STMMAC_COAL_TIMER(x) (ns_to_ktime((x) * NSEC_PER_USEC))
+int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled)
+{
+ int ret = 0;
+
+ if (enabled) {
+ ret = clk_prepare_enable(priv->plat->stmmac_clk);
+ if (ret)
+ return ret;
+ ret = clk_prepare_enable(priv->plat->pclk);
+ if (ret) {
+ clk_disable_unprepare(priv->plat->stmmac_clk);
+ return ret;
+ }
+ } else {
+ clk_disable_unprepare(priv->plat->stmmac_clk);
+ clk_disable_unprepare(priv->plat->pclk);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmmac_bus_clks_config);
+
/**
* stmmac_verify_args - verify the driver parameters.
* Description: it checks the driver parameters and set a default in case of
@@ -2800,6 +2823,12 @@ static int stmmac_open(struct net_device *dev)
u32 chan;
int ret;
+ ret = pm_runtime_get_sync(priv->device);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->device);
+ return ret;
+ }
+
if (priv->hw->pcs != STMMAC_PCS_TBI &&
priv->hw->pcs != STMMAC_PCS_RTBI &&
priv->hw->xpcs == NULL) {
@@ -2808,7 +2837,7 @@ static int stmmac_open(struct net_device *dev)
netdev_err(priv->dev,
"%s: Cannot attach to PHY (error: %d)\n",
__func__, ret);
- return ret;
+ goto init_phy_error;
}
}
@@ -2924,6 +2953,8 @@ static int stmmac_open(struct net_device *dev)
free_dma_desc_resources(priv);
dma_desc_error:
phylink_disconnect_phy(priv->phylink);
+init_phy_error:
+ pm_runtime_put(priv->device);
return ret;
}
@@ -2974,6 +3005,8 @@ static int stmmac_release(struct net_device *dev)
stmmac_release_ptp(priv);
+ pm_runtime_put(priv->device);
+
return 0;
}
@@ -4624,6 +4657,12 @@ static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vi
bool is_double = false;
int ret;
+ ret = pm_runtime_get_sync(priv->device);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->device);
+ return ret;
+ }
+
if (be16_to_cpu(proto) == ETH_P_8021AD)
is_double = true;
@@ -4632,10 +4671,15 @@ static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vi
if (priv->hw->num_vlan) {
ret = stmmac_del_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
if (ret)
- return ret;
+ goto del_vlan_error;
}
- return stmmac_vlan_update(priv, is_double);
+ ret = stmmac_vlan_update(priv, is_double);
+
+del_vlan_error:
+ pm_runtime_put(priv->device);
+
+ return ret;
}
static const struct net_device_ops stmmac_netdev_ops = {
@@ -5111,6 +5155,14 @@ int stmmac_dvr_probe(struct device *device,
stmmac_init_fs(ndev);
#endif
+ pm_runtime_get_noresume(device);
+ pm_runtime_set_active(device);
+ pm_runtime_enable(device);
+ /* Let pm_runtime_put() disable the clocks.
+ * If CONFIG_PM is not enabled, the clocks will stay powered.
+ */
+ pm_runtime_put(device);
+
return ret;
error_serdes_powerup:
@@ -5125,6 +5177,7 @@ int stmmac_dvr_probe(struct device *device,
stmmac_napi_del(ndev);
error_hw_init:
destroy_workqueue(priv->wq);
+ stmmac_bus_clks_config(priv, false);
return ret;
}
@@ -5157,8 +5210,8 @@ int stmmac_dvr_remove(struct device *dev)
phylink_destroy(priv->phylink);
if (priv->plat->stmmac_rst)
reset_control_assert(priv->plat->stmmac_rst);
- clk_disable_unprepare(priv->plat->pclk);
- clk_disable_unprepare(priv->plat->stmmac_clk);
+ pm_runtime_put(dev);
+ pm_runtime_disable(dev);
if (priv->hw->pcs != STMMAC_PCS_TBI &&
priv->hw->pcs != STMMAC_PCS_RTBI)
stmmac_mdio_unregister(ndev);
@@ -5181,6 +5234,7 @@ int stmmac_suspend(struct device *dev)
struct net_device *ndev = dev_get_drvdata(dev);
struct stmmac_priv *priv = netdev_priv(ndev);
u32 chan;
+ int ret;
if (!ndev || !netif_running(ndev))
return 0;
@@ -5224,8 +5278,9 @@ int stmmac_suspend(struct device *dev)
pinctrl_pm_select_sleep_state(priv->device);
/* Disable clock in case of PWM is off */
clk_disable_unprepare(priv->plat->clk_ptp_ref);
- clk_disable_unprepare(priv->plat->pclk);
- clk_disable_unprepare(priv->plat->stmmac_clk);
+ ret = pm_runtime_force_suspend(dev);
+ if (ret)
+ return ret;
}
mutex_unlock(&priv->lock);
@@ -5289,8 +5344,9 @@ int stmmac_resume(struct device *dev)
} else {
pinctrl_pm_select_default_state(priv->device);
/* enable the clk previously disabled */
- clk_prepare_enable(priv->plat->stmmac_clk);
- clk_prepare_enable(priv->plat->pclk);
+ ret = pm_runtime_force_resume(dev);
+ if (ret)
+ return ret;
if (priv->plat->clk_ptp_ref)
clk_prepare_enable(priv->plat->clk_ptp_ref);
/* reset the phy so that it's ready */
@@ -17,6 +17,7 @@
#include <linux/of_mdio.h>
#include <linux/phy.h>
#include <linux/property.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include "dwxgmac2.h"
@@ -87,21 +88,29 @@ static int stmmac_xgmac2_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
u32 tmp, addr, value = MII_XGMAC_BUSY;
int ret;
+ ret = pm_runtime_get_sync(priv->device);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->device);
+ return ret;
+ }
+
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
- !(tmp & MII_XGMAC_BUSY), 100, 10000))
- return -EBUSY;
+ !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
if (phyreg & MII_ADDR_C45) {
phyreg &= ~MII_ADDR_C45;
ret = stmmac_xgmac2_c45_format(priv, phyaddr, phyreg, &addr);
if (ret)
- return ret;
+ goto err_disable_clks;
} else {
ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
if (ret)
- return ret;
+ goto err_disable_clks;
value |= MII_XGMAC_SADDR;
}
@@ -112,8 +121,10 @@ static int stmmac_xgmac2_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
- !(tmp & MII_XGMAC_BUSY), 100, 10000))
- return -EBUSY;
+ !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
/* Set the MII address register to read */
writel(addr, priv->ioaddr + mii_address);
@@ -121,11 +132,18 @@ static int stmmac_xgmac2_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
- !(tmp & MII_XGMAC_BUSY), 100, 10000))
- return -EBUSY;
+ !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
/* Read the data from the MII data register */
return readl(priv->ioaddr + mii_data) & GENMASK(15, 0);
+
+err_disable_clks:
+ pm_runtime_put(priv->device);
+
+ return ret;
}
static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
@@ -138,21 +156,29 @@ static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
u32 addr, tmp, value = MII_XGMAC_BUSY;
int ret;
+ ret = pm_runtime_get_sync(priv->device);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->device);
+ return ret;
+ }
+
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
- !(tmp & MII_XGMAC_BUSY), 100, 10000))
- return -EBUSY;
+ !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
if (phyreg & MII_ADDR_C45) {
phyreg &= ~MII_ADDR_C45;
ret = stmmac_xgmac2_c45_format(priv, phyaddr, phyreg, &addr);
if (ret)
- return ret;
+ goto err_disable_clks;
} else {
ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
if (ret)
- return ret;
+ goto err_disable_clks;
value |= MII_XGMAC_SADDR;
}
@@ -164,8 +190,10 @@ static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
- !(tmp & MII_XGMAC_BUSY), 100, 10000))
- return -EBUSY;
+ !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
/* Set the MII address register to write */
writel(addr, priv->ioaddr + mii_address);
@@ -174,6 +202,11 @@ static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
/* Wait until any existing MII operation is complete */
return readl_poll_timeout(priv->ioaddr + mii_data, tmp,
!(tmp & MII_XGMAC_BUSY), 100, 10000);
+
+err_disable_clks:
+ pm_runtime_put(priv->device);
+
+ return ret;
}
/**
@@ -193,9 +226,15 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
u32 value = MII_BUSY;
- int data = 0;
+ int ret, data = 0;
u32 v;
+ ret = pm_runtime_get_sync(priv->device);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->device);
+ return ret;
+ }
+
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
@@ -216,20 +255,29 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
}
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
- 100, 10000))
- return -EBUSY;
+ 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
writel(data, priv->ioaddr + mii_data);
writel(value, priv->ioaddr + mii_address);
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
- 100, 10000))
- return -EBUSY;
+ 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
/* Read the data from the MII data register */
data = (int)readl(priv->ioaddr + mii_data) & MII_DATA_MASK;
return data;
+
+err_disable_clks:
+ pm_runtime_put(priv->device);
+
+ return ret;
}
/**
@@ -248,9 +296,15 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
u32 value = MII_BUSY;
- int data = phydata;
+ int ret, data = phydata;
u32 v;
+ ret = pm_runtime_get_sync(priv->device);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->device);
+ return ret;
+ }
+
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
@@ -275,8 +329,10 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
- 100, 10000))
- return -EBUSY;
+ 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
/* Set the MII address register to write */
writel(data, priv->ioaddr + mii_data);
@@ -285,6 +341,11 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
/* Wait until any existing MII operation is complete */
return readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
100, 10000);
+
+err_disable_clks:
+ pm_runtime_put(priv->device);
+
+ return ret;
}
/**
@@ -744,10 +744,30 @@ static int stmmac_pltfr_resume(struct device *dev)
return stmmac_resume(dev);
}
+
+static int stmmac_runtime_suspend(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+
+ stmmac_bus_clks_config(priv, false);
+
+ return 0;
+}
+
+static int stmmac_runtime_resume(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+
+ return stmmac_bus_clks_config(priv, true);
+}
#endif /* CONFIG_PM_SLEEP */
-SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops, stmmac_pltfr_suspend,
- stmmac_pltfr_resume);
+const struct dev_pm_ops stmmac_pltfr_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend, stmmac_pltfr_resume)
+ SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL)
+};
EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops);
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support");
This patch intends to add clocks management for stmmac driver: If CONFIG_PM enabled: 1. Keep clocks disabled after driver probed. 2. Enable clocks when up the net device, and disable clocks when down the net device. If CONFIG_PM disabled: Keep clocks always enabled after driver probed. Note: 1. It is fine for ethtool, since the way of implementing ethtool_ops::begin in stmmac is only can be accessed when interface is enabled, so the clocks are ticked. 2. The MDIO bus has a different life cycle to the MAC, need ensure clocks are enabled when _mdio_read/write() need clocks, because these functions can be called while the interface it not opened. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> --- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 + .../net/ethernet/stmicro/stmmac/stmmac_main.c | 74 ++++++++++-- .../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 105 ++++++++++++++---- .../ethernet/stmicro/stmmac/stmmac_platform.c | 24 +++- 4 files changed, 171 insertions(+), 33 deletions(-)