@@ -1320,7 +1320,7 @@ config ARM_PSCI
# selected platforms.
config ARCH_NR_GPIO
int
- default 2048 if ARCH_SOCFPGA
+ default 2048 if ARCH_INTEL_SOCFPGA
default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \
ARCH_ZYNQ || ARCH_ASPEED
default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
@@ -1087,7 +1087,7 @@ choice
on SD5203 UART.
config DEBUG_SOCFPGA_UART0
- depends on ARCH_SOCFPGA
+ depends on ARCH_INTEL_SOCFPGA
bool "Use SOCFPGA UART0 for low-level debug"
select DEBUG_UART_8250
help
@@ -1095,7 +1095,7 @@ choice
on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
config DEBUG_SOCFPGA_ARRIA10_UART1
- depends on ARCH_SOCFPGA
+ depends on ARCH_INTEL_SOCFPGA
bool "Use SOCFPGA Arria10 UART1 for low-level debug"
select DEBUG_UART_8250
help
@@ -1103,7 +1103,7 @@ choice
on SOCFPGA(Arria 10) based platforms.
config DEBUG_SOCFPGA_CYCLONE5_UART1
- depends on ARCH_SOCFPGA
+ depends on ARCH_INTEL_SOCFPGA
bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug"
select DEBUG_UART_8250
help
@@ -209,7 +209,7 @@ machine-$(CONFIG_PLAT_SAMSUNG) += s3c
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_RENESAS) += shmobile
-machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
+machine-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_STI) += sti
machine-$(CONFIG_ARCH_STM32) += stm32
machine-$(CONFIG_ARCH_SUNXI) += sunxi
@@ -1033,7 +1033,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
s5pv210-smdkc110.dtb \
s5pv210-smdkv210.dtb \
s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SOCFPGA) += \
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk_nand.dtb \
socfpga_arria10_socdk_qspi.dtb \
@@ -2,6 +2,7 @@
menuconfig ARCH_SOCFPGA
bool "Altera SOCFPGA family"
depends on ARCH_MULTI_V7
+ select ARCH_INTEL_SOCFPGA
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
select ARM_GIC
@@ -20,6 +21,9 @@ menuconfig ARCH_SOCFPGA
select PL310_ERRATA_769419
if ARCH_SOCFPGA
+config ARCH_INTEL_SOCFPGA
+ bool
+
config SOCFPGA_SUSPEND
bool "Suspend to RAM on SOCFPGA"
help
@@ -256,9 +256,13 @@ config ARCH_SEATTLE
config ARCH_STRATIX10
bool "Altera's Stratix 10 SoCFPGA Family"
+ select ARCH_INTEL_SOCFPGA
help
This enables support for Altera's Stratix 10 SoCFPGA Family.
+config ARCH_INTEL_SOCFPGA
+ bool
+
config ARCH_SYNQUACER
bool "Socionext SynQuacer SoC Family"
@@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb \
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_stratix10_socdk.dtb \
socfpga_stratix10_socdk_nand.dtb
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. This the common practice for other platforms. Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come from multiple vendors. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- arch/arm/Kconfig | 2 +- arch/arm/Kconfig.debug | 6 +++--- arch/arm/Makefile | 2 +- arch/arm/boot/dts/Makefile | 2 +- arch/arm/mach-socfpga/Kconfig | 4 ++++ arch/arm64/Kconfig.platforms | 4 ++++ arch/arm64/boot/dts/altera/Makefile | 2 +- 7 files changed, 15 insertions(+), 7 deletions(-)