diff mbox series

[net] net: hdlc_x25: Prevent racing between "x25_close" and "x25_xmit"/"x25_rx"

Message ID 20210314103104.43679-1-xie.he.0141@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series [net] net: hdlc_x25: Prevent racing between "x25_close" and "x25_xmit"/"x25_rx" | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present fail Series targets non-next tree, but doesn't contain any Fixes tags
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 109 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Xie He March 14, 2021, 10:31 a.m. UTC
"x25_close" is called by "hdlc_close" in "hdlc.c", which is called by
hardware drivers' "ndo_stop" function.
"x25_xmit" is called by "hdlc_start_xmit" in "hdlc.c", which is hardware
drivers' "ndo_start_xmit" function.
"x25_rx" is called by "hdlc_rcv" in "hdlc.c", which receives HDLC frames
from "net/core/dev.c".

"x25_close" races with "x25_xmit" and "x25_rx" because their callers race.

However, we need to ensure that the LAPB APIs called in "x25_xmit" and
"x25_rx" are called before "lapb_unregister" is called in "x25_close".

This patch adds locking to ensure when "x25_xmit" and "x25_rx" are doing
their work, "lapb_unregister" is not yet called in "x25_close".

Reasons for not solving the racing between "x25_close" and "x25_xmit" by
calling "netif_tx_disable" in "x25_close":
1. We still need to solve the racing between "x25_close" and "x25_rx";
2. The design of the HDLC subsystem assumes the HDLC hardware drivers
have full control over the TX queue, and the HDLC protocol drivers (like
this driver) have no control. Controlling the queue here in the protocol
driver may interfere with hardware drivers' control of the queue.

Signed-off-by: Xie He <xie.he.0141@gmail.com>
---
 drivers/net/wan/hdlc_x25.c | 42 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c
index 4aaa6388b9ee..5a6a945f6c81 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/net/wan/hdlc_x25.c
@@ -23,6 +23,8 @@ 
 
 struct x25_state {
 	x25_hdlc_proto settings;
+	bool up;
+	spinlock_t up_lock; /* Protects "up" */
 };
 
 static int x25_ioctl(struct net_device *dev, struct ifreq *ifr);
@@ -104,6 +106,8 @@  static void x25_data_transmit(struct net_device *dev, struct sk_buff *skb)
 
 static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev)
 {
+	hdlc_device *hdlc = dev_to_hdlc(dev);
+	struct x25_state *x25st = state(hdlc);
 	int result;
 
 	/* There should be a pseudo header of 1 byte added by upper layers.
@@ -114,11 +118,19 @@  static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev)
 		return NETDEV_TX_OK;
 	}
 
+	spin_lock_bh(&x25st->up_lock);
+	if (!x25st->up) {
+		spin_unlock_bh(&x25st->up_lock);
+		kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+
 	switch (skb->data[0]) {
 	case X25_IFACE_DATA:	/* Data to be transmitted */
 		skb_pull(skb, 1);
 		if ((result = lapb_data_request(dev, skb)) != LAPB_OK)
 			dev_kfree_skb(skb);
+		spin_unlock_bh(&x25st->up_lock);
 		return NETDEV_TX_OK;
 
 	case X25_IFACE_CONNECT:
@@ -147,6 +159,7 @@  static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev)
 		break;
 	}
 
+	spin_unlock_bh(&x25st->up_lock);
 	dev_kfree_skb(skb);
 	return NETDEV_TX_OK;
 }
@@ -164,6 +177,7 @@  static int x25_open(struct net_device *dev)
 		.data_transmit = x25_data_transmit,
 	};
 	hdlc_device *hdlc = dev_to_hdlc(dev);
+	struct x25_state *x25st = state(hdlc);
 	struct lapb_parms_struct params;
 	int result;
 
@@ -190,6 +204,10 @@  static int x25_open(struct net_device *dev)
 	if (result != LAPB_OK)
 		return -EINVAL;
 
+	spin_lock_bh(&x25st->up_lock);
+	x25st->up = true;
+	spin_unlock_bh(&x25st->up_lock);
+
 	return 0;
 }
 
@@ -197,6 +215,13 @@  static int x25_open(struct net_device *dev)
 
 static void x25_close(struct net_device *dev)
 {
+	hdlc_device *hdlc = dev_to_hdlc(dev);
+	struct x25_state *x25st = state(hdlc);
+
+	spin_lock_bh(&x25st->up_lock);
+	x25st->up = false;
+	spin_unlock_bh(&x25st->up_lock);
+
 	lapb_unregister(dev);
 }
 
@@ -205,15 +230,28 @@  static void x25_close(struct net_device *dev)
 static int x25_rx(struct sk_buff *skb)
 {
 	struct net_device *dev = skb->dev;
+	hdlc_device *hdlc = dev_to_hdlc(dev);
+	struct x25_state *x25st = state(hdlc);
 
 	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) {
 		dev->stats.rx_dropped++;
 		return NET_RX_DROP;
 	}
 
-	if (lapb_data_received(dev, skb) == LAPB_OK)
+	spin_lock_bh(&x25st->up_lock);
+	if (!x25st->up) {
+		spin_unlock_bh(&x25st->up_lock);
+		kfree_skb(skb);
+		dev->stats.rx_dropped++;
+		return NET_RX_DROP;
+	}
+
+	if (lapb_data_received(dev, skb) == LAPB_OK) {
+		spin_unlock_bh(&x25st->up_lock);
 		return NET_RX_SUCCESS;
+	}
 
+	spin_unlock_bh(&x25st->up_lock);
 	dev->stats.rx_errors++;
 	dev_kfree_skb_any(skb);
 	return NET_RX_DROP;
@@ -298,6 +336,8 @@  static int x25_ioctl(struct net_device *dev, struct ifreq *ifr)
 			return result;
 
 		memcpy(&state(hdlc)->settings, &new_settings, size);
+		state(hdlc)->up = false;
+		spin_lock_init(&state(hdlc)->up_lock);
 
 		/* There's no header_ops so hard_header_len should be 0. */
 		dev->hard_header_len = 0;