diff mbox series

[net-next,1/7] mlxsw: reg: Add egr_et_set field to SPVID

Message ID 20210317103529.2903172-2-idosch@idosch.org (mailing list archive)
State Accepted
Commit 1b35293b7afc5bdd6731502c6bba11a04a71512a
Delegated to: Netdev Maintainers
Headers show
Series mlxsw: Allow 802.1d and .1ad VxLAN bridges to coexist on Spectrum>=2 | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 5 of 5 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 21 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Ido Schimmel March 17, 2021, 10:35 a.m. UTC 
From: Amit Cohen <amcohen@nvidia.com>

SPVID.egr_et_set=1 means that when VLAN is pushed at ingress (for untagged
packets or for QinQ push mode) then the EtherType is decided at the egress
port.

The next patches will use this field for VxLAN devices (tunnel port) in
order to allow using dual VxLAN bridges (802.1d and 802.1ad at the same
time).

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 44f836246e33..626f5e5c8a93 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -842,6 +842,14 @@  MLXSW_ITEM32(reg, spvid, local_port, 0x00, 16, 8);
  */
 MLXSW_ITEM32(reg, spvid, sub_port, 0x00, 8, 8);
 
+/* reg_spvid_egr_et_set
+ * When VLAN is pushed at ingress (for untagged packets or for
+ * QinQ push mode) then the EtherType is decided at the egress port.
+ * Reserved when Spectrum-1.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvid, egr_et_set, 0x04, 24, 1);
+
 /* reg_spvid_et_vlan
  * EtherType used for when VLAN is pushed at ingress (for untagged
  * packets or for QinQ push mode).
@@ -849,6 +857,7 @@  MLXSW_ITEM32(reg, spvid, sub_port, 0x00, 8, 8);
  * 1: ether_type1
  * 2: ether_type2 - Reserved when Spectrum-1, supported by Spectrum-2
  * Ethertype IDs are configured by SVER.
+ * Reserved when egr_et_set = 1.
  * Access: RW
  */
 MLXSW_ITEM32(reg, spvid, et_vlan, 0x04, 16, 2);