diff mbox series

[net-next,2/5] igc: Remove unused MII_CR_SPEED

Message ID 20210319211723.1488244-3-anthony.l.nguyen@intel.com (mailing list archive)
State Accepted
Commit 1fa81e259b49479fc54658a6e6c3ff629e35777a
Delegated to: Netdev Maintainers
Headers show
Series 1GbE Intel Wired LAN Driver Updates 2021-03-19 | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 2 maintainers not CCed: jesse.brandeburg@intel.com intel-wired-lan@lists.osuosl.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 8 this patch: 8
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 9 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 8 this patch: 8
netdev/header_inline success Link

Commit Message

Tony Nguyen March 19, 2021, 9:17 p.m. UTC 
From: Sasha Neftin <sasha.neftin@intel.com>

Force PHY speed not supported for i225 devices.
MII_CR_SPEED masks not in use in i225 device and can be removed.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/igc/igc_defines.h | 3 ---
 1 file changed, 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h
index ca460bf1af2f..59043c3c5657 100644
--- a/drivers/net/ethernet/intel/igc/igc_defines.h
+++ b/drivers/net/ethernet/intel/igc/igc_defines.h
@@ -442,9 +442,6 @@ 
 #define MII_CR_POWER_DOWN	0x0800  /* Power down */
 #define MII_CR_AUTO_NEG_EN	0x1000  /* Auto Neg Enable */
 #define MII_CR_LOOPBACK		0x4000  /* 0 = normal, 1 = loopback */
-#define MII_CR_SPEED_1000	0x0040
-#define MII_CR_SPEED_100	0x2000
-#define MII_CR_SPEED_10		0x0000
 
 /* PHY Status Register */
 #define MII_SR_LINK_STATUS	0x0004 /* Link Status 1 = link */