diff mbox series

[net-next,8/9] net: enetc: increase RX ring default size

Message ID 20210331200857.3274425-9-olteanv@gmail.com (mailing list archive)
State Accepted
Commit d6a2829e82cff9e5ec10b8ee293488b57399ed01
Delegated to: Netdev Maintainers
Headers show
Series XDP for NXP ENETC | expand

Checks

Context Check Description
netdev/apply success Patch already applied to net-next
netdev/tree_selection success Clearly marked for net-next

Commit Message

Vladimir Oltean March 31, 2021, 8:08 p.m. UTC 
From: Vladimir Oltean <vladimir.oltean@nxp.com>

As explained in the XDP_TX patch, when receiving a burst of frames with
the XDP_TX verdict, there is a momentary dip in the number of available
RX buffers. The system will eventually recover as TX completions will
start kicking in and refilling our RX BD ring again. But until that
happens, we need to survive with as few out-of-buffer discards as
possible.

This increases the memory footprint of the driver in order to avoid
discards at 2.5Gbps line rate 64B packet sizes, the maximum speed
available for testing on 1 port on NXP LS1028A.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/ethernet/freescale/enetc/enetc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/enetc/enetc.h b/drivers/net/ethernet/freescale/enetc/enetc.h
index 864da962ae21..d0619fcbbe97 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc.h
@@ -71,7 +71,7 @@  struct enetc_xdp_data {
 	int xdp_tx_in_flight;
 };
 
-#define ENETC_RX_RING_DEFAULT_SIZE	512
+#define ENETC_RX_RING_DEFAULT_SIZE	2048
 #define ENETC_TX_RING_DEFAULT_SIZE	256
 #define ENETC_DEFAULT_TX_WORK		(ENETC_TX_RING_DEFAULT_SIZE / 2)