diff mbox series

[net-next,v4,2/6] net: stmmac: make SPH enable/disable to be configurable

Message ID 20210401021117.13360-3-boon.leong.ong@intel.com (mailing list archive)
State Accepted
Delegated to: Netdev Maintainers
Headers show
Series stmmac: Add XDP support | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 18 of 18 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 20 this patch: 20
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 37 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 20 this patch: 20
netdev/header_inline success Link

Commit Message

Ong Boon Leong April 1, 2021, 2:11 a.m. UTC
SPH functionality splits header and payload according to split mode and
offsef fields (SPLM and SPLOFST). It is beneficials for Linux network
stack RX processing however it adds a lot of complexity in XDP
processing.

So, this patch makes the split-header (SPH) capability of the controller
is stored in "priv->sph_cap" and the enabling/disabling of SPH is decided
by "priv->sph".

This is to prepare initial XDP enabling for stmmac to disable the use of
SPH whenever XDP is enabled.

Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      |  1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 +++++++-----
 2 files changed, 8 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 9966f6f10905..e293423f98c3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -160,6 +160,7 @@  struct stmmac_priv {
 	bool tx_path_in_lpi_mode;
 	bool tso;
 	int sph;
+	int sph_cap;
 	u32 sarc_type;
 
 	unsigned int dma_buf_sz;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 9d63e8c365ae..18e34a1e2367 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2858,6 +2858,7 @@  static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
 	struct stmmac_priv *priv = netdev_priv(dev);
 	u32 rx_cnt = priv->plat->rx_queues_to_use;
 	u32 tx_cnt = priv->plat->tx_queues_to_use;
+	bool sph_en;
 	u32 chan;
 	int ret;
 
@@ -2952,10 +2953,10 @@  static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
 	}
 
 	/* Enable Split Header */
-	if (priv->sph && priv->hw->rx_csum) {
-		for (chan = 0; chan < rx_cnt; chan++)
-			stmmac_enable_sph(priv, priv->ioaddr, 1, chan);
-	}
+	sph_en = (priv->hw->rx_csum > 0) && priv->sph;
+	for (chan = 0; chan < rx_cnt; chan++)
+		stmmac_enable_sph(priv, priv->ioaddr, sph_en, chan);
+
 
 	/* VLAN Tag Insertion */
 	if (priv->dma_cap.vlins)
@@ -5708,7 +5709,8 @@  int stmmac_dvr_probe(struct device *device,
 
 	if (priv->dma_cap.sphen) {
 		ndev->hw_features |= NETIF_F_GRO;
-		priv->sph = true;
+		priv->sph_cap = true;
+		priv->sph = priv->sph_cap;
 		dev_info(priv->device, "SPH feature enabled\n");
 	}