diff mbox series

[net-next,2/2] net: pcs: configure xpcs 2.5G speed mode

Message ID 20210401150152.22444-3-michael.wei.hong.sit@intel.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Enable 2.5Gbps speed for stmmac | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 12 of 12 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 22 this patch: 22
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: line length of 81 exceeds 80 columns
netdev/build_allmodconfig_warn success Errors and warnings before: 22 this patch: 22
netdev/header_inline success Link

Commit Message

Sit, Michael Wei Hong April 1, 2021, 3:01 p.m. UTC 
From: Voon Weifeng <weifeng.voon@intel.com>

Besides setting 2.5G configuration, this patch will also disable
automatic speed mode change. This is due to the 2.5G mode is
using the same functionality as 1G mode except the clock rate is
2.5 times the original rate. Hence, auto-negotiation is disabled
to make sure it will only be in 2.5G mode.

Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  1 +
 drivers/net/pcs/pcs-xpcs.c                    | 29 +++++++++++++++++++
 include/linux/pcs/pcs-xpcs.h                  |  1 +
 3 files changed, 31 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e182f9be4247..23178651310e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -5835,6 +5835,7 @@  int stmmac_dvr_probe(struct device *device,
 	if (priv->plat->speed_mode_2500) {
 		priv->plat->speed_2500_en = priv->plat->speed_mode_2500(ndev,
 									priv->plat->bsp_priv);
+		priv->hw->xpcs_args.speed_2500_en = priv->plat->speed_2500_en;
 	}
 
 	ret = stmmac_phy_setup(priv);
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 944ba105cac1..e7562cfcd7d5 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -60,10 +60,14 @@ 
 
 /* Clause 37 Defines */
 /* VR MII MMD registers offsets */
+#define DW_VR_MII_MMD_CTRL		0x0000
 #define DW_VR_MII_DIG_CTRL1		0x8000
 #define DW_VR_MII_AN_CTRL		0x8001
 #define DW_VR_MII_AN_INTR_STS		0x8002
 
+/* Enable 2.5G Mode */
+#define DW_VR_MII_DIG_CTRL1_2G5_EN	BIT(2)
+
 /* VR_MII_DIG_CTRL1 */
 #define DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW		BIT(9)
 
@@ -86,6 +90,11 @@ 
 #define DW_VR_MII_C37_ANSGM_SP_1000		0x2
 #define DW_VR_MII_C37_ANSGM_SP_LNKSTS		BIT(4)
 
+/* SR MII MMD Control defines */
+#define AN_CL37_EN		BIT(12)	/* Enable Clause 37 auto-nego */
+#define SGMII_SPEED_SS13	BIT(13)	/* SGMII speed along with SS6 */
+#define SGMII_SPEED_SS6		BIT(6)	/* SGMII speed along with SS13 */
+
 static const int xpcs_usxgmii_features[] = {
 	ETHTOOL_LINK_MODE_Pause_BIT,
 	ETHTOOL_LINK_MODE_Asym_Pause_BIT,
@@ -141,6 +150,7 @@  static const int xpcs_sgmii_features[] = {
 	ETHTOOL_LINK_MODE_100baseT_Full_BIT,
 	ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
 	ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+	ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
 	__ETHTOOL_LINK_MODE_MASK_NBITS,
 };
 
@@ -654,6 +664,25 @@  static int xpcs_config_aneg_c37_sgmii(struct mdio_xpcs_args *xpcs)
 {
 	int ret;
 
+	if (xpcs->speed_2500_en) {
+		ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1);
+		if (ret < 0)
+			return ret;
+		ret |= DW_VR_MII_DIG_CTRL1_2G5_EN;
+		ret &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
+		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
+		if (ret < 0)
+			return ret;
+
+		ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL);
+		if (ret < 0)
+			return ret;
+		ret &= ~AN_CL37_EN;
+		ret |= SGMII_SPEED_SS6;
+		ret &= ~SGMII_SPEED_SS13;
+		return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL, ret);
+	}
+
 	/* For AN for C37 SGMII mode, the settings are :-
 	 * 1) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 10b (SGMII AN)
 	 * 2) VR_MII_AN_CTRL Bit(3) [TX_CONFIG] = 0b (MAC side SGMII)
diff --git a/include/linux/pcs/pcs-xpcs.h b/include/linux/pcs/pcs-xpcs.h
index 2cb5188a7ef1..6b94b2a48e0c 100644
--- a/include/linux/pcs/pcs-xpcs.h
+++ b/include/linux/pcs/pcs-xpcs.h
@@ -19,6 +19,7 @@  struct mdio_xpcs_args {
 	struct mii_bus *bus;
 	int addr;
 	int an_mode;
+	bool speed_2500_en;
 };
 
 struct mdio_xpcs_ops {