| Message ID | 20210412090327.22330-2-yangbo.lu@nxp.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | f768e75130159b5444ee691bbdd201bef8e5bb24 |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | enetc: support PTP Sync packet one-step timestamping | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | success | Link |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Guessed tree name to be net-next |
| netdev/subject_prefix | warning | Target tree name not specified in the subject |
| netdev/cc_maintainers | success | CCed 4 of 4 maintainers |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 3 this patch: 3 |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 53 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 3 this patch: 3 |
| netdev/header_inline | success | Link |
On 12.04.2021 12:03, Yangbo Lu wrote: > Mark TX timestamp type per skb on skb->cb[0], instead of > global variable for all skbs. This is a preparation for > one step timestamp support. > > For one-step timestamping enablement, there will be both > one-step and two-step PTP messages to transfer. And a skb > queue is needed for one-step PTP messages making sure > start to send current message only after the last one > completed on hardware. (ENETC single-step register has to > be dynamically configured per message.) So, marking TX > timestamp type per skb is required. > > Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index 41bfc6e623bf..6e3a5303e2bb 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -67,8 +67,7 @@ static void enetc_update_tx_ring_tail(struct enetc_bdr *tx_ring) enetc_wr_reg_hot(tx_ring->tpir, tx_ring->next_to_use); } -static int enetc_map_tx_buffs(struct enetc_bdr *tx_ring, struct sk_buff *skb, - int active_offloads) +static int enetc_map_tx_buffs(struct enetc_bdr *tx_ring, struct sk_buff *skb) { struct enetc_tx_swbd *tx_swbd; skb_frag_t *frag; @@ -101,7 +100,7 @@ static int enetc_map_tx_buffs(struct enetc_bdr *tx_ring, struct sk_buff *skb, count++; do_vlan = skb_vlan_tag_present(skb); - do_tstamp = (active_offloads & ENETC_F_TX_TSTAMP) && + do_tstamp = (skb->cb[0] & ENETC_F_TX_TSTAMP) && (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP); tx_swbd->do_tstamp = do_tstamp; tx_swbd->check_wb = tx_swbd->do_tstamp; @@ -221,6 +220,9 @@ netdev_tx_t enetc_xmit(struct sk_buff *skb, struct net_device *ndev) struct enetc_bdr *tx_ring; int count; + /* cb[0] used for TX timestamp type */ + skb->cb[0] = priv->active_offloads & ENETC_F_TX_TSTAMP_MASK; + tx_ring = priv->tx_ring[skb->queue_mapping]; if (unlikely(skb_shinfo(skb)->nr_frags > ENETC_MAX_SKB_FRAGS)) @@ -234,7 +236,7 @@ netdev_tx_t enetc_xmit(struct sk_buff *skb, struct net_device *ndev) } enetc_lock_mdio(); - count = enetc_map_tx_buffs(tx_ring, skb, priv->active_offloads); + count = enetc_map_tx_buffs(tx_ring, skb); enetc_unlock_mdio(); if (unlikely(!count)) diff --git a/drivers/net/ethernet/freescale/enetc/enetc.h b/drivers/net/ethernet/freescale/enetc/enetc.h index 05474f46b0d9..96889529383e 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.h +++ b/drivers/net/ethernet/freescale/enetc/enetc.h @@ -271,12 +271,15 @@ struct psfp_cap { u32 max_psfp_meter; }; +#define ENETC_F_TX_TSTAMP_MASK 0xff /* TODO: more hardware offloads */ enum enetc_active_offloads { - ENETC_F_RX_TSTAMP = BIT(0), - ENETC_F_TX_TSTAMP = BIT(1), - ENETC_F_QBV = BIT(2), - ENETC_F_QCI = BIT(3), + /* 8 bits reserved for TX timestamp types (hwtstamp_tx_types) */ + ENETC_F_TX_TSTAMP = BIT(0), + + ENETC_F_RX_TSTAMP = BIT(8), + ENETC_F_QBV = BIT(9), + ENETC_F_QCI = BIT(10), }; /* interrupt coalescing modes */
Mark TX timestamp type per skb on skb->cb[0], instead of global variable for all skbs. This is a preparation for one step timestamp support. For one-step timestamping enablement, there will be both one-step and two-step PTP messages to transfer. And a skb queue is needed for one-step PTP messages making sure start to send current message only after the last one completed on hardware. (ENETC single-step register has to be dynamically configured per message.) So, marking TX timestamp type per skb is required. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> --- Changes for v2: - Rebased. Changes for v3: - None. --- drivers/net/ethernet/freescale/enetc/enetc.c | 10 ++++++---- drivers/net/ethernet/freescale/enetc/enetc.h | 11 +++++++---- 2 files changed, 13 insertions(+), 8 deletions(-)