diff mbox series

[net-next,1/3] dt-bindings: net: add nvmem-mac-address-offset property

Message ID 20210414152657.12097-2-michael@walle.cc (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series net: add support for an offset of a nvmem provided MAC address | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 5 of 5 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 12 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Michael Walle April 14, 2021, 3:26 p.m. UTC
It is already possible to read the MAC address via a NVMEM provider. But
there are boards, esp. with many ports, which only have a base MAC
address stored. Thus we need to have a way to provide an offset per
network device.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 .../devicetree/bindings/net/ethernet-controller.yaml        | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Andrew Lunn April 14, 2021, 3:43 p.m. UTC | #1
On Wed, Apr 14, 2021 at 05:26:55PM +0200, Michael Walle wrote:
> It is already possible to read the MAC address via a NVMEM provider. But
> there are boards, esp. with many ports, which only have a base MAC
> address stored. Thus we need to have a way to provide an offset per
> network device.

We need to see what Rob thinks of this. There was recently a patchset
to support swapping the byte order of the MAC address in a NVMEM. Rob
said the NVMEM provider should have the property, not the MAC driver.
This does seems more ethernet specific, so maybe it should be an
Ethernet property?

	 Andrew
Rob Herring April 15, 2021, 9:59 p.m. UTC | #2
On Wed, Apr 14, 2021 at 05:43:49PM +0200, Andrew Lunn wrote:
> On Wed, Apr 14, 2021 at 05:26:55PM +0200, Michael Walle wrote:
> > It is already possible to read the MAC address via a NVMEM provider. But
> > there are boards, esp. with many ports, which only have a base MAC
> > address stored. Thus we need to have a way to provide an offset per
> > network device.
> 
> We need to see what Rob thinks of this. There was recently a patchset
> to support swapping the byte order of the MAC address in a NVMEM. Rob
> said the NVMEM provider should have the property, not the MAC driver.
> This does seems more ethernet specific, so maybe it should be an
> Ethernet property?

There was also this one[1]. I'm not totally opposed, but don't want to 
see a never ending addition of properties to try to describe any 
possible transformation.

Rob

[1] https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20200920095724.8251-4-ansuelsmth@gmail.com/
Michael Walle April 15, 2021, 10:27 p.m. UTC | #3
Am 2021-04-15 23:59, schrieb Rob Herring:
> On Wed, Apr 14, 2021 at 05:43:49PM +0200, Andrew Lunn wrote:
>> On Wed, Apr 14, 2021 at 05:26:55PM +0200, Michael Walle wrote:
>> > It is already possible to read the MAC address via a NVMEM provider. But
>> > there are boards, esp. with many ports, which only have a base MAC
>> > address stored. Thus we need to have a way to provide an offset per
>> > network device.
>> 
>> We need to see what Rob thinks of this. There was recently a patchset
>> to support swapping the byte order of the MAC address in a NVMEM. Rob
>> said the NVMEM provider should have the property, not the MAC driver.
>> This does seems more ethernet specific, so maybe it should be an
>> Ethernet property?
> 
> There was also this one[1]. I'm not totally opposed, but don't want to
> see a never ending addition of properties to try to describe any
> possible transformation.

Agreed, that stuff like ASCII MAC address parsing should be done
elsewhere. But IMHO adding an offset is a pretty common one (as also
pointed out in [1]). And it also need to be a per ethernet device
property.

-michael

[1] 
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20200920095724.8251-4-ansuelsmth@gmail.com/
Florian Fainelli April 15, 2021, 11:45 p.m. UTC | #4
On 4/15/2021 2:59 PM, Rob Herring wrote:
> On Wed, Apr 14, 2021 at 05:43:49PM +0200, Andrew Lunn wrote:
>> On Wed, Apr 14, 2021 at 05:26:55PM +0200, Michael Walle wrote:
>>> It is already possible to read the MAC address via a NVMEM provider. But
>>> there are boards, esp. with many ports, which only have a base MAC
>>> address stored. Thus we need to have a way to provide an offset per
>>> network device.
>>
>> We need to see what Rob thinks of this. There was recently a patchset
>> to support swapping the byte order of the MAC address in a NVMEM. Rob
>> said the NVMEM provider should have the property, not the MAC driver.
>> This does seems more ethernet specific, so maybe it should be an
>> Ethernet property?
> 
> There was also this one[1]. I'm not totally opposed, but don't want to 
> see a never ending addition of properties to try to describe any 
> possible transformation.

If only we could load eBPF bytecode embedded into Device Tree ;)
Michael Walle May 12, 2021, 3:27 p.m. UTC | #5
[adding Srinivas Kandagatla and Ansuel Smith]

Am 2021-04-16 00:27, schrieb Michael Walle:
> Am 2021-04-15 23:59, schrieb Rob Herring:
>> On Wed, Apr 14, 2021 at 05:43:49PM +0200, Andrew Lunn wrote:
>>> On Wed, Apr 14, 2021 at 05:26:55PM +0200, Michael Walle wrote:
>>> > It is already possible to read the MAC address via a NVMEM provider. But
>>> > there are boards, esp. with many ports, which only have a base MAC
>>> > address stored. Thus we need to have a way to provide an offset per
>>> > network device.
>>> 
>>> We need to see what Rob thinks of this. There was recently a patchset
>>> to support swapping the byte order of the MAC address in a NVMEM. Rob
>>> said the NVMEM provider should have the property, not the MAC driver.
>>> This does seems more ethernet specific, so maybe it should be an
>>> Ethernet property?
>> 
>> There was also this one[1]. I'm not totally opposed, but don't want to
>> see a never ending addition of properties to try to describe any
>> possible transformation.
> 
> Agreed, that stuff like ASCII MAC address parsing should be done
> elsewhere. But IMHO adding an offset is a pretty common one (as also
> pointed out in [1]). And it also need to be a per ethernet device
> property.

I'm a bit up in the air on this, as I don't know how to proceed here.

To cite Rob from IRC:
   Not really up to me. All the people that care need to come up with
   something flexible enough for common/simple cases and that's not
   going to get extended with every new variation. What I don't want is
   a one-off that's then extended with another one-off.

I already pointed out that this property is per consumer as opposed
to something like endianess swap or parsing a given format. The latter
operates on the nvmem cell.

One random idea is to have a nvmem-cells-transformation (in the lack of
a better name) property for consumers, where you can have some kind of
simple operations like add:
   nvmem-cells-transformation = <NVMEM_ADD 1>
But is that something we really want to have? I'm not sure.

btw. given that there might be other means where a base mac address can
come from in the future, it might make sense to drop the "nvmem-"
prefix and just use "mac-address-offset" (or 
"base-mac-address-offset"?).

> [1] 
> https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20200920095724.8251-4-ansuelsmth@gmail.com/

-michael
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index e8f04687a3e0..1a8517b0e445 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -52,6 +52,12 @@  properties:
   nvmem-cell-names:
     const: mac-address
 
+  nvmem-mac-address-offset:
+    maxItems: 1
+    description:
+      Specifies an offset which will be added to the MAC address when
+      fetched from a nvmem cell.
+
   phy-connection-type:
     description:
       Specifies interface type between the Ethernet device and a physical