diff mbox series

[net,4/4] ch_ktls: do not send snd_una update to TCB in middle

Message ID 20210415074748.421098-5-vinay.yadav@chelsio.com (mailing list archive)
State Accepted
Commit e8a4155567b3c903f49cbf89b8017e9cc22c4fe4
Delegated to: Netdev Maintainers
Headers show
Series chelsio/ch_ktls: chelsio inline tls driver bug fixes | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net
netdev/subject_prefix success Link
netdev/cc_maintainers warning 2 maintainers not CCed: arnd@arndb.de ayush.sawal@chelsio.com
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 1 this patch: 1
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 65 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 1 this patch: 1
netdev/header_inline success Link

Commit Message

Vinay Kumar Yadav April 15, 2021, 7:47 a.m. UTC
snd_una update should not be done when the same skb is being
sent out.chcr_short_record_handler() sends it again even
though SND_UNA update is already sent for the skb in
chcr_ktls_xmit(), which causes mismatch in un-acked
TCP seq number, later causes problem in sending out
complete record.

Fixes: 429765a149f1 ("chcr: handle partial end part of a record")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
---
 .../chelsio/inline_crypto/ch_ktls/chcr_ktls.c | 53 -------------------
 1 file changed, 53 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c
index 8559eec161f0..a3f5b80888e5 100644
--- a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c
+++ b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c
@@ -1644,54 +1644,6 @@  static void chcr_ktls_copy_record_in_skb(struct sk_buff *nskb,
 	refcount_add(nskb->truesize, &nskb->sk->sk_wmem_alloc);
 }
 
-/*
- * chcr_ktls_update_snd_una:  Reset the SEND_UNA. It will be done to avoid
- * sending the same segment again. It will discard the segment which is before
- * the current tx max.
- * @tx_info - driver specific tls info.
- * @q - TX queue.
- * return: NET_TX_OK/NET_XMIT_DROP.
- */
-static int chcr_ktls_update_snd_una(struct chcr_ktls_info *tx_info,
-				    struct sge_eth_txq *q)
-{
-	struct fw_ulptx_wr *wr;
-	unsigned int ndesc;
-	int credits;
-	void *pos;
-	u32 len;
-
-	len = sizeof(*wr) + roundup(CHCR_SET_TCB_FIELD_LEN, 16);
-	ndesc = DIV_ROUND_UP(len, 64);
-
-	credits = chcr_txq_avail(&q->q) - ndesc;
-	if (unlikely(credits < 0)) {
-		chcr_eth_txq_stop(q);
-		return NETDEV_TX_BUSY;
-	}
-
-	pos = &q->q.desc[q->q.pidx];
-
-	wr = pos;
-	/* ULPTX wr */
-	wr->op_to_compl = htonl(FW_WR_OP_V(FW_ULPTX_WR));
-	wr->cookie = 0;
-	/* fill len in wr field */
-	wr->flowid_len16 = htonl(FW_WR_LEN16_V(DIV_ROUND_UP(len, 16)));
-
-	pos += sizeof(*wr);
-
-	pos = chcr_write_cpl_set_tcb_ulp(tx_info, q, tx_info->tid, pos,
-					 TCB_SND_UNA_RAW_W,
-					 TCB_SND_UNA_RAW_V(TCB_SND_UNA_RAW_M),
-					 TCB_SND_UNA_RAW_V(0), 0);
-
-	chcr_txq_advance(&q->q, ndesc);
-	cxgb4_ring_tx_db(tx_info->adap, &q->q, ndesc);
-
-	return 0;
-}
-
 /*
  * chcr_end_part_handler: This handler will handle the record which
  * is complete or if record's end part is received. T6 adapter has a issue that
@@ -1892,11 +1844,6 @@  static int chcr_short_record_handler(struct chcr_ktls_info *tx_info,
 			/* reset tcp_seq as per the prior_data_required len */
 			tcp_seq -= prior_data_len;
 		}
-		/* reset snd una, so the middle record won't send the already
-		 * sent part.
-		 */
-		if (chcr_ktls_update_snd_una(tx_info, q))
-			goto out;
 		atomic64_inc(&tx_info->adap->ch_ktls_stats.ktls_tx_middle_pkts);
 	} else {
 		atomic64_inc(&tx_info->adap->ch_ktls_stats.ktls_tx_start_pkts);