From patchwork Thu Apr 22 09:42:52 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Prasanna Vengateshan X-Patchwork-Id: 12218117 X-Patchwork-Delegate: kuba@kernel.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.6 required=3.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id D8C70C43470 for ; Thu, 22 Apr 2021 09:43:42 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 929216145B for ; Thu, 22 Apr 2021 09:43:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235832AbhDVJoQ (ORCPT ); Thu, 22 Apr 2021 05:44:16 -0400 Received: from esa.microchip.iphmx.com ([68.232.153.233]:10061 "EHLO esa.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235808AbhDVJoJ (ORCPT ); Thu, 22 Apr 2021 05:44:09 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1619084615; x=1650620615; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=7SSFrl+5NIAzvUBbGWPK9IGKXyOHdU8P4ln9Vf2SqSs=; b=corsCTaLycEjA3lKug198JRnQGqDL6bFQ9JZl0cDc/1x5+14dJAOiFyR yNfe/GrUEPdfWz7kS5nkUvhNhoC1XUio7JGK60SQfLIvm2HEmGItskBnc ibC/+v47Zf/KE8tcc1pboeIP24kdhpFe1XTNb8HQWepP8C2O+vcUiHu6l WvO2bo9NgJVH3LzLBKR5uGWiGQ15+4/0dnmec9xxQ+SjZfjSLeoMY1+X3 0B5h7FSZRg4wgmbVu99Y+BvwXBUX2wD8bUQTkBpBfM2d/svT5uVqixayM pqagSLtyCHG4mVRk/DEWhfRDOQUDDlOT4PcGP0ratNJfOcmm6vuUjTa0j A==; IronPort-SDR: YS6RIMtA4vaYUfe+xnfCGO++Qn1yDbJZDlrZhYZhB+FTijKQOM6e5i+Yqy6mrKKcOYLfgpEKvj MOQLr1cuoYYeeQDN1+5Ws63PAf0o2VT1GeLsF3OHlOXK9oBJ/YcOXTV6s5O0jAYN+AiCKpbKyi z2vpyoK6tZ2v8ehScIK7SgYT9xf+o3DDUDmZaie1xAt9XbtzwPww30rAI6PA7nmIiZjJNEAz8M 6YS9QbWfTC/ltp2QSQBhWyXttD+n4Sm8gYxvwpVRewTkmEF+G+1fas1cgEYYMsmqhMe1+Ec3DZ J80= X-IronPort-AV: E=Sophos;i="5.82,242,1613458800"; d="scan'208";a="117417286" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa5.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 22 Apr 2021 02:43:34 -0700 Received: from chn-vm-ex01.mchp-main.com (10.10.85.143) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2176.2; Thu, 22 Apr 2021 02:43:33 -0700 Received: from CHE-LT-I21427LX.microchip.com (10.10.115.15) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server id 15.1.2176.2 via Frontend Transport; Thu, 22 Apr 2021 02:43:27 -0700 From: Prasanna Vengateshan To: , , , CC: , , , , , , , , Subject: [PATCH v2 net-next 4/9] net: dsa: microchip: add DSA support for microchip lan937x Date: Thu, 22 Apr 2021 15:12:52 +0530 Message-ID: <20210422094257.1641396-5-prasanna.vengateshan@microchip.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210422094257.1641396-1-prasanna.vengateshan@microchip.com> References: <20210422094257.1641396-1-prasanna.vengateshan@microchip.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org Basic DSA driver support for lan937x and the device will be configured through SPI interface. drivers/net/dsa/microchip/ path is already part of MAINTAINERS & the new files come under this path. Hence no update needed to the MAINTAINERS Reused KSZ APIs for port_bridge_join() & port_bridge_leave() and added support for port_stp_state_set() & port_fast_age(). lan937x_flush_dyn_mac_table() which gets called from port_fast_age() of KSZ common layer, hence added support for it. currently port_bridge_flags returns -EOPNOTSUPP, this support will be added later Signed-off-by: Prasanna Vengateshan --- drivers/net/dsa/microchip/Kconfig | 12 + drivers/net/dsa/microchip/Makefile | 5 + drivers/net/dsa/microchip/ksz_common.h | 5 + drivers/net/dsa/microchip/lan937x_dev.c | 674 +++++++++++++++++++++ drivers/net/dsa/microchip/lan937x_dev.h | 68 +++ drivers/net/dsa/microchip/lan937x_main.c | 364 ++++++++++++ drivers/net/dsa/microchip/lan937x_reg.h | 710 +++++++++++++++++++++++ drivers/net/dsa/microchip/lan937x_spi.c | 226 ++++++++ 8 files changed, 2064 insertions(+) create mode 100644 drivers/net/dsa/microchip/lan937x_dev.c create mode 100644 drivers/net/dsa/microchip/lan937x_dev.h create mode 100644 drivers/net/dsa/microchip/lan937x_main.c create mode 100644 drivers/net/dsa/microchip/lan937x_reg.h create mode 100644 drivers/net/dsa/microchip/lan937x_spi.c diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig index 4ec6a47b7f72..ae2484e3759b 100644 --- a/drivers/net/dsa/microchip/Kconfig +++ b/drivers/net/dsa/microchip/Kconfig @@ -3,6 +3,18 @@ config NET_DSA_MICROCHIP_KSZ_COMMON select NET_DSA_TAG_KSZ tristate +config NET_DSA_MICROCHIP_LAN937X + tristate "Microchip LAN937X series SPI connected switch support" + depends on NET_DSA && SPI + select NET_DSA_MICROCHIP_KSZ_COMMON + select REGMAP_SPI + help + This driver adds support for Microchip LAN937X series + switch chips. + + Select to enable support for registering switches configured + through SPI. + menuconfig NET_DSA_MICROCHIP_KSZ9477 tristate "Microchip KSZ9477 series switch support" depends on NET_DSA diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile index 929caa81e782..13f38efdadf0 100644 --- a/drivers/net/dsa/microchip/Makefile +++ b/drivers/net/dsa/microchip/Makefile @@ -5,3 +5,8 @@ obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C) += ksz9477_i2c.o obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI) += ksz9477_spi.o obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8795) += ksz8795.o obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8795_SPI) += ksz8795_spi.o + +obj-$(CONFIG_NET_DSA_MICROCHIP_LAN937X) += lan937x.o +lan937x-objs := lan937x_dev.o +lan937x-objs += lan937x_main.o +lan937x-objs += lan937x_spi.o diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index f212775372ce..a0ec3d36c889 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -60,6 +60,8 @@ struct ksz_device { struct gpio_desc *reset_gpio; /* Optional reset GPIO */ + struct device_node *mdio_np; + /* chip specific data */ u32 chip_id; int num_vlans; @@ -144,6 +146,9 @@ void ksz_switch_remove(struct ksz_device *dev); int ksz8795_switch_register(struct ksz_device *dev); int ksz9477_switch_register(struct ksz_device *dev); +int lan937x_switch_register(struct ksz_device *dev); + +int lan937x_check_device_id(struct ksz_device *dev); void ksz_update_port_member(struct ksz_device *dev, int port); void ksz_init_mib_timer(struct ksz_device *dev); diff --git a/drivers/net/dsa/microchip/lan937x_dev.c b/drivers/net/dsa/microchip/lan937x_dev.c new file mode 100644 index 000000000000..21dbc8df5f83 --- /dev/null +++ b/drivers/net/dsa/microchip/lan937x_dev.c @@ -0,0 +1,674 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Microchip lan937x dev ops functions + * Copyright (C) 2019-2021 Microchip Technology Inc. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "lan937x_reg.h" +#include "ksz_common.h" +#include "lan937x_dev.h" + +const struct mib_names lan937x_mib_names[] = { + { 0x00, "rx_hi" }, + { 0x01, "rx_undersize" }, + { 0x02, "rx_fragments" }, + { 0x03, "rx_oversize" }, + { 0x04, "rx_jabbers" }, + { 0x05, "rx_symbol_err" }, + { 0x06, "rx_crc_err" }, + { 0x07, "rx_align_err" }, + { 0x08, "rx_mac_ctrl" }, + { 0x09, "rx_pause" }, + { 0x0A, "rx_bcast" }, + { 0x0B, "rx_mcast" }, + { 0x0C, "rx_ucast" }, + { 0x0D, "rx_64_or_less" }, + { 0x0E, "rx_65_127" }, + { 0x0F, "rx_128_255" }, + { 0x10, "rx_256_511" }, + { 0x11, "rx_512_1023" }, + { 0x12, "rx_1024_1522" }, + { 0x13, "rx_1523_2000" }, + { 0x14, "rx_2001" }, + { 0x15, "tx_hi" }, + { 0x16, "tx_late_col" }, + { 0x17, "tx_pause" }, + { 0x18, "tx_bcast" }, + { 0x19, "tx_mcast" }, + { 0x1A, "tx_ucast" }, + { 0x1B, "tx_deferred" }, + { 0x1C, "tx_total_col" }, + { 0x1D, "tx_exc_col" }, + { 0x1E, "tx_single_col" }, + { 0x1F, "tx_mult_col" }, + { 0x80, "rx_total" }, + { 0x81, "tx_total" }, + { 0x82, "rx_discards" }, + { 0x83, "tx_discards" }, +}; + +struct prt_init { + int addr; + u8 mask; + bool is_set; +}; + +int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) +{ + return regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0); +} + +int lan937x_port_cfg(struct ksz_device *dev, int port, int offset, + u8 bits, bool set) +{ + return regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset), + bits, set ? bits : 0); +} + +int lan937x_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set) +{ + return regmap_update_bits(dev->regmap[2], addr, bits, set ? bits : 0); +} + +int lan937x_pread8(struct ksz_device *dev, int port, int offset, + u8 *data) +{ + return ksz_read8(dev, PORT_CTRL_ADDR(port, offset), data); +} + +int lan937x_pread16(struct ksz_device *dev, int port, int offset, + u16 *data) +{ + return ksz_read16(dev, PORT_CTRL_ADDR(port, offset), data); +} + +int lan937x_pread32(struct ksz_device *dev, int port, int offset, + u32 *data) +{ + return ksz_read32(dev, PORT_CTRL_ADDR(port, offset), data); +} + +int lan937x_pwrite8(struct ksz_device *dev, int port, + int offset, u8 data) +{ + return ksz_write8(dev, PORT_CTRL_ADDR(port, offset), data); +} + +int lan937x_pwrite16(struct ksz_device *dev, int port, + int offset, u16 data) +{ + return ksz_write16(dev, PORT_CTRL_ADDR(port, offset), data); +} + +int lan937x_pwrite32(struct ksz_device *dev, int port, + int offset, u32 data) +{ + return ksz_write32(dev, PORT_CTRL_ADDR(port, offset), data); +} + +int lan937x_port_cfg32(struct ksz_device *dev, int port, int offset, + u32 bits, bool set) +{ + return regmap_update_bits(dev->regmap[2], PORT_CTRL_ADDR(port, offset), + bits, set ? bits : 0); +} + +void lan937x_cfg_port_member(struct ksz_device *dev, int port, + u8 member) +{ + lan937x_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member); + + dev->ports[port].member = member; +} + +static void lan937x_flush_dyn_mac_table(struct ksz_device *dev, int port) +{ + unsigned int value; + u8 data; + + regmap_update_bits(dev->regmap[0], REG_SW_LUE_CTRL_2, + SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S, + SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S); + + if (port < dev->port_cnt) { + /* flush individual port */ + lan937x_pread8(dev, port, P_STP_CTRL, &data); + if (!(data & PORT_LEARN_DISABLE)) + lan937x_pwrite8(dev, port, P_STP_CTRL, + data | PORT_LEARN_DISABLE); + lan937x_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true); + + regmap_read_poll_timeout(dev->regmap[0], + S_FLUSH_TABLE_CTRL, + value, !(value & SW_FLUSH_DYN_MAC_TABLE), 10, 1000); + + lan937x_pwrite8(dev, port, P_STP_CTRL, data); + } else { + /* flush all */ + lan937x_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true); + } +} + +static void lan937x_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, + u64 *cnt) +{ + unsigned int val; + u32 data; + int ret; + + /* Enable MIB Counter read*/ + data = MIB_COUNTER_READ; + data |= (addr << MIB_COUNTER_INDEX_S); + lan937x_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data); + + ret = regmap_read_poll_timeout(dev->regmap[2], + PORT_CTRL_ADDR(port, + REG_PORT_MIB_CTRL_STAT__4), + val, !(val & MIB_COUNTER_READ), 10, 1000); + /* failed to read MIB. get out of loop */ + if (ret) { + dev_err(dev->dev, "Failed to get MIB\n"); + return; + } + + /* count resets upon read */ + lan937x_pread32(dev, port, REG_PORT_MIB_DATA, &data); + *cnt += data; +} + +static void lan937x_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, + u64 *dropped, u64 *cnt) +{ + addr = lan937x_mib_names[addr].index; + lan937x_r_mib_cnt(dev, port, addr, cnt); +} + +static void lan937x_port_init_cnt(struct ksz_device *dev, int port) +{ + struct ksz_port_mib *mib = &dev->ports[port].mib; + + /* flush all enabled port MIB counters */ + mutex_lock(&mib->cnt_mutex); + lan937x_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, + MIB_COUNTER_FLUSH_FREEZE); + ksz_write8(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FLUSH); + lan937x_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 0); + mutex_unlock(&mib->cnt_mutex); + + mib->cnt_ptr = 0; + memset(mib->counters, 0, dev->mib_cnt * sizeof(u64)); +} + +int lan937x_reset_switch(struct ksz_device *dev) +{ + u32 data32; + u8 data8; + int rc; + + /* reset switch */ + rc = lan937x_cfg(dev, REG_SW_OPERATION, SW_RESET, true); + if (rc < 0) + return rc; + + /* default configuration */ + rc = ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8); + if (rc < 0) + return rc; + + data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING | + SW_SRC_ADDR_FILTER; + + rc = ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); + if (rc < 0) + return rc; + + /* disable interrupts */ + rc = ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); + if (rc < 0) + return rc; + + rc = ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0xFF); + if (rc < 0) + return rc; + + rc = ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32); + if (rc < 0) + return rc; + + /* set broadcast storm protection 10% rate */ + rc = regmap_update_bits(dev->regmap[1], REG_SW_MAC_CTRL_2, + BROADCAST_STORM_RATE, + (BROADCAST_STORM_VALUE * + BROADCAST_STORM_PROT_RATE) / 100); + + return rc; +} + +static int lan937x_switch_detect(struct ksz_device *dev) +{ + u32 id32; + int ret; + + /* Read Chip ID */ + ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32); + + if (ret) + return ret; + + if (id32 != 0) { + dev->chip_id = id32; + dev_info(dev->dev, "Chip ID: 0x%x", id32); + ret = 0; + } else { + ret = -EINVAL; + } + + return ret; +} + +static void lan937x_switch_exit(struct ksz_device *dev) +{ + lan937x_reset_switch(dev); +} + +int lan937x_enable_spi_indirect_access(struct ksz_device *dev) +{ + u16 data16; + u8 data8; + int rc; + + rc = ksz_read8(dev, REG_GLOBAL_CTRL_0, &data8); + if (rc < 0) + return rc; + + /* Check if PHY register is blocked */ + if (data8 & SW_PHY_REG_BLOCK) { + /* Enable Phy access through SPI*/ + data8 &= ~SW_PHY_REG_BLOCK; + + rc = ksz_write8(dev, REG_GLOBAL_CTRL_0, data8); + if (rc < 0) + return rc; + } + + rc = ksz_read16(dev, REG_VPHY_SPECIAL_CTRL__2, &data16); + if (rc < 0) + return rc; + + /* Allow SPI access */ + data16 |= VPHY_SPI_INDIRECT_ENABLE; + rc = ksz_write16(dev, REG_VPHY_SPECIAL_CTRL__2, data16); + + return rc; +} + +bool lan937x_is_internal_phy_port(struct ksz_device *dev, int port) +{ + /* Check if the port is RGMII */ + if (port == LAN937X_RGMII_1_PORT || port == LAN937X_RGMII_2_PORT) + return false; + + /* Check if the port is SGMII */ + if (port == LAN937X_SGMII_PORT && + GET_CHIP_ID_LSB(dev->chip_id) == CHIP_ID_73) + return false; + + return true; +} + +static u32 lan937x_get_port_addr(int port, int offset) +{ + return PORT_CTRL_ADDR(port, offset); +} + +bool lan937x_is_internal_100BTX_phy_port(struct ksz_device *dev, int port) +{ + /* Check if the port is internal tx phy port */ + if (lan937x_is_internal_phy_port(dev, port) && port == LAN937X_TXPHY_PORT) + if ((GET_CHIP_ID_LSB(dev->chip_id) == CHIP_ID_71) || + (GET_CHIP_ID_LSB(dev->chip_id) == CHIP_ID_72)) + return true; + + return false; +} + +bool lan937x_is_internal_t1_phy_port(struct ksz_device *dev, int port) +{ + /* Check if the port is internal t1 phy port */ + if (lan937x_is_internal_phy_port(dev, port) && + !lan937x_is_internal_100BTX_phy_port(dev, port)) + return true; + + return false; +} + +int lan937x_internal_phy_write(struct ksz_device *dev, int addr, + int reg, u16 val) +{ + u16 temp, addr_base; + unsigned int value; + int rc; + + /* Check for internal phy port */ + if (!lan937x_is_internal_phy_port(dev, addr)) + return -EOPNOTSUPP; + + if (lan937x_is_internal_100BTX_phy_port(dev, addr)) + addr_base = REG_PORT_TX_PHY_CTRL_BASE; + else + addr_base = REG_PORT_T1_PHY_CTRL_BASE; + + temp = PORT_CTRL_ADDR(addr, (addr_base + (reg << 2))); + + rc = ksz_write16(dev, REG_VPHY_IND_ADDR__2, temp); + if (rc < 0) + return rc; + + /* Write the data to be written to the VPHY reg */ + rc = ksz_write16(dev, REG_VPHY_IND_DATA__2, val); + if (rc < 0) + return rc; + + /* Write the Write En and Busy bit */ + rc = ksz_write16(dev, REG_VPHY_IND_CTRL__2, (VPHY_IND_WRITE + | VPHY_IND_BUSY)); + if (rc < 0) + return rc; + + rc = regmap_read_poll_timeout(dev->regmap[1], + REG_VPHY_IND_CTRL__2, + value, !(value & VPHY_IND_BUSY), 10, 1000); + + /* failed to write phy register. get out of loop */ + if (rc < 0) { + dev_err(dev->dev, "Failed to write phy register\n"); + return rc; + } + + return 0; +} + +int lan937x_internal_phy_read(struct ksz_device *dev, int addr, + int reg, u16 *val) +{ + u16 temp, addr_base; + unsigned int value; + int rc; + + /* Check for internal phy port, return 0xffff for non-existent phy*/ + if (!lan937x_is_internal_phy_port(dev, addr)) + return 0xffff; + + if (lan937x_is_internal_100BTX_phy_port(dev, addr)) + addr_base = REG_PORT_TX_PHY_CTRL_BASE; + else + addr_base = REG_PORT_T1_PHY_CTRL_BASE; + + /* get register address based on the logical port */ + temp = PORT_CTRL_ADDR(addr, (addr_base + (reg << 2))); + + rc = ksz_write16(dev, REG_VPHY_IND_ADDR__2, temp); + if (rc < 0) + return rc; + + /* Write Read and Busy bit to start the transaction*/ + rc = ksz_write16(dev, REG_VPHY_IND_CTRL__2, VPHY_IND_BUSY); + if (rc < 0) + return rc; + + rc = regmap_read_poll_timeout(dev->regmap[1], + REG_VPHY_IND_CTRL__2, + value, !(value & VPHY_IND_BUSY), 10, 1000); + + /* failed to read phy register. get out of loop */ + if (rc < 0) { + dev_err(dev->dev, "Failed to read phy register\n"); + return rc; + } + + /* Read the VPHY register which has the PHY data*/ + rc = ksz_read16(dev, REG_VPHY_IND_DATA__2, val); + + return rc; +} + +static void lan937x_set_gbit(struct ksz_device *dev, bool gbit, u8 *data) +{ + if (gbit) + *data &= ~PORT_MII_NOT_1GBIT; + else + *data |= PORT_MII_NOT_1GBIT; +} + +void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port) +{ + struct ksz_port *p = &dev->ports[port]; + u8 data8, member; + + /* enable tag tail for host port */ + if (cpu_port) { + lan937x_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE, + true); + /* Enable jumbo packet in host port so that frames are not + * counted as oversized. + */ + lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, PORT_JUMBO_PACKET, + true); + lan937x_pwrite16(dev, port, REG_PORT_MTU__2, FR_SIZE_CPU_PORT); + } + + lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, PORT_FR_CHK_LENGTH, + false); + + lan937x_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false); + + /* set back pressure */ + lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true); + + /* enable broadcast storm limit */ + lan937x_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); + + /* disable DiffServ priority */ + lan937x_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false); + + /* replace priority */ + lan937x_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING, + false); + lan937x_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4, + MTI_PVID_REPLACE, false); + + /* enable 802.1p priority */ + lan937x_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); + + if (!lan937x_is_internal_phy_port(dev, port)) { + /* force flow control off*/ + lan937x_port_cfg(dev, port, REG_PORT_XMII_CTRL_0, + PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, + false); + + lan937x_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8); + + /* clear MII selection & set it based on interface later */ + data8 &= ~PORT_MII_SEL_M; + + /* configure MAC based on p->interface */ + switch (p->interface) { + case PHY_INTERFACE_MODE_MII: + lan937x_set_gbit(dev, false, &data8); + data8 |= PORT_MII_SEL; + break; + case PHY_INTERFACE_MODE_RMII: + lan937x_set_gbit(dev, false, &data8); + data8 |= PORT_RMII_SEL; + break; + default: + lan937x_set_gbit(dev, true, &data8); + data8 |= PORT_RGMII_SEL; + + data8 &= ~PORT_RGMII_ID_IG_ENABLE; + data8 &= ~PORT_RGMII_ID_EG_ENABLE; + + if (p->interface == PHY_INTERFACE_MODE_RGMII_ID || + p->interface == PHY_INTERFACE_MODE_RGMII_RXID) + data8 |= PORT_RGMII_ID_IG_ENABLE; + + if (p->interface == PHY_INTERFACE_MODE_RGMII_ID || + p->interface == PHY_INTERFACE_MODE_RGMII_TXID) + data8 |= PORT_RGMII_ID_EG_ENABLE; + break; + } + lan937x_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8); + } + + if (cpu_port) + member = dev->port_mask; + else + member = dev->host_mask | p->vid_member; + + lan937x_cfg_port_member(dev, port, member); +} + +static int lan937x_sw_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct ksz_device *dev = bus->priv; + u16 val; + int rc; + + rc = lan937x_internal_phy_read(dev, addr, regnum, &val); + if (rc < 0) + return rc; + + return val; +} + +static int lan937x_sw_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val) +{ + struct ksz_device *dev = bus->priv; + + return lan937x_internal_phy_write(dev, addr, regnum, val); +} + +static int lan937x_mdio_register(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + int ret; + + dev->mdio_np = of_get_compatible_child(ds->dev->of_node, "microchip,lan937x-mdio"); + + if (!dev->mdio_np) { + dev_err(ds->dev, "no MDIO bus node\n"); + return -ENODEV; + } + + ds->slave_mii_bus = devm_mdiobus_alloc(ds->dev); + + if (!ds->slave_mii_bus) + return -ENOMEM; + + ds->slave_mii_bus->priv = ds->priv; + ds->slave_mii_bus->read = lan937x_sw_mdio_read; + ds->slave_mii_bus->write = lan937x_sw_mdio_write; + ds->slave_mii_bus->name = "lan937x slave smi"; + snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d", + ds->index); + ds->slave_mii_bus->parent = ds->dev; + ds->slave_mii_bus->phy_mask = ~ds->phys_mii_mask; + + ret = of_mdiobus_register(ds->slave_mii_bus, dev->mdio_np); + + if (ret) { + dev_err(ds->dev, "unable to register MDIO bus %s\n", + ds->slave_mii_bus->id); + of_node_put(dev->mdio_np); + return ret; + } + + return 0; +} + +static int lan937x_switch_init(struct ksz_device *dev) +{ + int i, ret; + + dev->ds->ops = &lan937x_switch_ops; + + /* Check device tree */ + ret = lan937x_check_device_id(dev); + + if (ret) + return ret; + + dev->port_mask = (1 << dev->port_cnt) - 1; + + dev->reg_mib_cnt = SWITCH_COUNTER_NUM; + dev->mib_cnt = ARRAY_SIZE(lan937x_mib_names); + + dev->ports = devm_kzalloc(dev->dev, + dev->port_cnt * sizeof(struct ksz_port), + GFP_KERNEL); + if (!dev->ports) + return -ENOMEM; + + for (i = 0; i < dev->port_cnt; i++) { + mutex_init(&dev->ports[i].mib.cnt_mutex); + dev->ports[i].mib.counters = + devm_kzalloc(dev->dev, + sizeof(u64) * + (dev->mib_cnt + 1), + GFP_KERNEL); + if (!dev->ports[i].mib.counters) + return -ENOMEM; + } + + /* set the real number of ports */ + dev->ds->num_ports = dev->port_cnt; + return 0; +} + +static int lan937x_init(struct ksz_device *dev) +{ + int rc; + + rc = lan937x_switch_init(dev); + if (rc < 0) { + dev_err(dev->dev, "failed to initialize the switch"); + return rc; + } + + /* enable Indirect Access from SPI to the VPHY registers */ + rc = lan937x_enable_spi_indirect_access(dev); + if (rc < 0) { + dev_err(dev->dev, "failed to enable spi indirect access"); + return rc; + } + + rc = lan937x_mdio_register(dev->ds); + if (rc < 0) { + dev_err(dev->dev, "failed to register the mdio"); + return rc; + } + + return 0; +} + +const struct ksz_dev_ops lan937x_dev_ops = { + .get_port_addr = lan937x_get_port_addr, + .cfg_port_member = lan937x_cfg_port_member, + .flush_dyn_mac_table = lan937x_flush_dyn_mac_table, + .port_setup = lan937x_port_setup, + .r_mib_cnt = lan937x_r_mib_cnt, + .r_mib_pkt = lan937x_r_mib_pkt, + .port_init_cnt = lan937x_port_init_cnt, + .shutdown = lan937x_reset_switch, + .detect = lan937x_switch_detect, + .init = lan937x_init, + .exit = lan937x_switch_exit, +}; diff --git a/drivers/net/dsa/microchip/lan937x_dev.h b/drivers/net/dsa/microchip/lan937x_dev.h new file mode 100644 index 000000000000..c98e8140ca30 --- /dev/null +++ b/drivers/net/dsa/microchip/lan937x_dev.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Microchip lan937x dev ops headers + * Copyright (C) 2019-2021 Microchip Technology Inc. + */ + +#ifndef __LAN937X_CFG_H +#define __LAN937X_CFG_H + +int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set); +int lan937x_port_cfg(struct ksz_device *dev, int port, int offset, + u8 bits, bool set); +int lan937x_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set); +int lan937x_pread8(struct ksz_device *dev, int port, int offset, + u8 *data); +int lan937x_pread16(struct ksz_device *dev, int port, int offset, + u16 *data); +int lan937x_pread32(struct ksz_device *dev, int port, int offset, + u32 *data); +int lan937x_pwrite8(struct ksz_device *dev, int port, + int offset, u8 data); +int lan937x_pwrite16(struct ksz_device *dev, int port, + int offset, u16 data); +int lan937x_pwrite32(struct ksz_device *dev, int port, + int offset, u32 data); +int lan937x_port_cfg32(struct ksz_device *dev, int port, int offset, + u32 bits, bool set); +int lan937x_internal_phy_write(struct ksz_device *dev, int addr, + int reg, u16 val); +int lan937x_internal_phy_read(struct ksz_device *dev, int addr, + int reg, u16 *val); +bool lan937x_is_internal_100BTX_phy_port(struct ksz_device *dev, int port); +bool lan937x_is_internal_t1_phy_port(struct ksz_device *dev, int port); +bool lan937x_is_internal_phy_port(struct ksz_device *dev, int port); +int lan937x_reset_switch(struct ksz_device *dev); +void lan937x_cfg_port_member(struct ksz_device *dev, int port, + u8 member); +void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port); +int lan937x_enable_spi_indirect_access(struct ksz_device *dev); + +struct mib_names { + int index; + char string[ETH_GSTRING_LEN]; +}; + +struct lan_alu_struct { + /* entry 1 */ + u8 is_static:1; + u8 is_src_filter:1; + u8 is_dst_filter:1; + u8 prio_age:3; + u32 _reserv_0_1:23; + u8 mstp:3; + /* entry 2 */ + u8 is_override:1; + u8 is_use_fid:1; + u32 _reserv_1_1:22; + u8 port_forward:8; + /* entry 3 & 4*/ + u32 _reserv_2_1:9; + u8 fid:7; + u8 mac[ETH_ALEN]; +}; + +extern const struct dsa_switch_ops lan937x_switch_ops; +extern const struct ksz_dev_ops lan937x_dev_ops; +extern const struct mib_names lan937x_mib_names[]; + +#endif diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c new file mode 100644 index 000000000000..944c6f4d6d60 --- /dev/null +++ b/drivers/net/dsa/microchip/lan937x_main.c @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Microchip LAN937X switch driver main logic + * Copyright (C) 2019-2021 Microchip Technology Inc. + */ +#include +#include +#include +#include +#include +#include +#include + +#include "lan937x_reg.h" +#include "ksz_common.h" +#include "lan937x_dev.h" + +static enum dsa_tag_protocol lan937x_get_tag_protocol(struct dsa_switch *ds, + int port, + enum dsa_tag_protocol mp) +{ + return DSA_TAG_PROTO_LAN937X_VALUE; +} + +static int lan937x_phy_read16(struct dsa_switch *ds, int addr, int reg) +{ + struct ksz_device *dev = ds->priv; + u16 val; + int rc; + + rc = lan937x_internal_phy_read(dev, addr, reg, &val); + + if (rc < 0) + return rc; + + return val; +} + +static int lan937x_phy_write16(struct dsa_switch *ds, int addr, int reg, + u16 val) +{ + struct ksz_device *dev = ds->priv; + + return lan937x_internal_phy_write(dev, addr, reg, val); +} + +static void lan937x_port_stp_state_set(struct dsa_switch *ds, int port, + u8 state) +{ + struct ksz_device *dev = ds->priv; + struct ksz_port *p = &dev->ports[port]; + int forward = dev->member; + int member = -1; + u8 data; + + lan937x_pread8(dev, port, P_STP_CTRL, &data); + data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); + + switch (state) { + case BR_STATE_DISABLED: + data |= PORT_LEARN_DISABLE; + break; + case BR_STATE_LISTENING: + data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE); + if (p->stp_state == BR_STATE_DISABLED) + member = dev->host_mask | p->vid_member; + break; + case BR_STATE_LEARNING: + data |= PORT_RX_ENABLE; + break; + case BR_STATE_FORWARDING: + data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); + + member = dev->host_mask | p->vid_member; + mutex_lock(&dev->dev_mutex); + + /* Port is a member of a bridge. */ + if (dev->br_member & (1 << port)) { + dev->member |= (1 << port); + member = dev->member; + } + mutex_unlock(&dev->dev_mutex); + break; + case BR_STATE_BLOCKING: + data |= PORT_LEARN_DISABLE; + if (p->stp_state == BR_STATE_DISABLED) + member = dev->host_mask | p->vid_member; + break; + default: + dev_err(ds->dev, "invalid STP state: %d\n", state); + return; + } + + lan937x_pwrite8(dev, port, P_STP_CTRL, data); + + p->stp_state = state; + mutex_lock(&dev->dev_mutex); + + /* Port membership may share register with STP state. */ + if (member >= 0 && member != p->member) + lan937x_cfg_port_member(dev, port, (u8)member); + + /* Check if forwarding needs to be updated. */ + if (state != BR_STATE_FORWARDING) { + if (dev->br_member & (1 << port)) + dev->member &= ~(1 << port); + } + + /* When topology has changed the function ksz_update_port_member + * should be called to modify port forwarding behavior. + */ + if (forward != dev->member) + ksz_update_port_member(dev, port); + mutex_unlock(&dev->dev_mutex); +} + +static phy_interface_t lan937x_get_interface(struct ksz_device *dev, int port) +{ + phy_interface_t interface; + u8 data8; + int rc; + + if (lan937x_is_internal_phy_port(dev, port)) + return PHY_INTERFACE_MODE_NA; + + /* read interface from REG_PORT_XMII_CTRL_1 register */ + rc = lan937x_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8); + + if (rc < 0) + return PHY_INTERFACE_MODE_NA; + + switch (data8 & PORT_MII_SEL_M) { + case PORT_RMII_SEL: + interface = PHY_INTERFACE_MODE_RMII; + break; + case PORT_RGMII_SEL: + interface = PHY_INTERFACE_MODE_RGMII; + if (data8 & PORT_RGMII_ID_EG_ENABLE) + interface = PHY_INTERFACE_MODE_RGMII_TXID; + if (data8 & PORT_RGMII_ID_IG_ENABLE) { + interface = PHY_INTERFACE_MODE_RGMII_RXID; + if (data8 & PORT_RGMII_ID_EG_ENABLE) + interface = PHY_INTERFACE_MODE_RGMII_ID; + } + break; + case PORT_MII_SEL: + default: + /* Interface is MII */ + interface = PHY_INTERFACE_MODE_MII; + break; + } + + return interface; +} + +static void lan937x_config_cpu_port(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + struct ksz_port *p; + int i; + + ds->num_ports = dev->port_cnt; + + for (i = 0; i < dev->port_cnt; i++) { + if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) { + phy_interface_t interface; + const char *prev_msg; + const char *prev_mode; + + dev->cpu_port = i; + dev->host_mask = (1 << dev->cpu_port); + dev->port_mask |= dev->host_mask; + p = &dev->ports[i]; + + /* Read from XMII register to determine host port + * interface. If set specifically in device tree + * note the difference to help debugging. + */ + interface = lan937x_get_interface(dev, i); + if (!p->interface) { + if (dev->compat_interface) + p->interface = dev->compat_interface; + else + p->interface = interface; + } + + if (interface && interface != p->interface) { + prev_msg = " instead of "; + prev_mode = phy_modes(interface); + } else { + prev_msg = ""; + prev_mode = ""; + } + + dev_info(dev->dev, + "Port%d: using phy mode %s%s%s\n", + i, + phy_modes(p->interface), + prev_msg, + prev_mode); + + /* enable cpu port */ + lan937x_port_setup(dev, i, true); + p->vid_member = dev->port_mask; + } + } + + dev->member = dev->host_mask; + + for (i = 0; i < dev->port_cnt; i++) { + if (i == dev->cpu_port) + continue; + p = &dev->ports[i]; + + /* Initialize to non-zero so that lan937x_cfg_port_member() will + * be called. + */ + p->vid_member = (1 << i); + p->member = dev->port_mask; + lan937x_port_stp_state_set(ds, i, BR_STATE_DISABLED); + } +} + +static int lan937x_setup(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + int rc; + + dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table), + dev->num_vlans, GFP_KERNEL); + if (!dev->vlan_cache) + return -ENOMEM; + + rc = lan937x_reset_switch(dev); + if (rc < 0) { + dev_err(ds->dev, "failed to reset switch\n"); + return rc; + } + + /* Required for port partitioning. */ + lan937x_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, + true); + + lan937x_config_cpu_port(ds); + + ds->configure_vlan_while_not_filtering = true; + + /* Enable aggressive back off & UNH */ + lan937x_cfg(dev, REG_SW_MAC_CTRL_0, SW_PAUSE_UNH_MODE | SW_NEW_BACKOFF | + SW_AGGR_BACKOFF, true); + + lan937x_cfg(dev, REG_SW_MAC_CTRL_1, (MULTICAST_STORM_DISABLE + | NO_EXC_COLLISION_DROP), true); + + /* queue based egress rate limit */ + lan937x_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true); + + lan937x_cfg(dev, REG_SW_LUE_CTRL_0, SW_RESV_MCAST_ENABLE, true); + + /* enable global MIB counter freeze function */ + lan937x_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); + + /* disable CLK125 & CLK25, 1: disable, 0: enable*/ + lan937x_cfg(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, (SW_CLK125_ENB | + SW_CLK25_ENB), true); + + lan937x_enable_spi_indirect_access(dev); + + /* start switch */ + lan937x_cfg(dev, REG_SW_OPERATION, SW_START, true); + + ksz_init_mib_timer(dev); + + return 0; +} + +static int lan937x_change_mtu(struct dsa_switch *ds, int port, int mtu) +{ + struct ksz_device *dev = ds->priv; + u16 max_size; + int rc; + + if (mtu >= FR_MIN_SIZE) { + rc = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, PORT_JUMBO_EN, true); + max_size = FR_MAX_SIZE; + } else { + rc = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, PORT_JUMBO_EN, false); + max_size = FR_MIN_SIZE; + } + + if (rc < 0) { + dev_err(ds->dev, "failed to enable jumbo\n"); + return rc; + } + + /* Write the frame size in PORT_MAX_FR_SIZE register */ + rc = lan937x_pwrite16(dev, port, PORT_MAX_FR_SIZE, max_size); + + if (rc < 0) { + dev_err(ds->dev, "failed to change the mtu\n"); + return rc; + } + + return 0; +} + +static int lan937x_get_max_mtu(struct dsa_switch *ds, int port) +{ + /* Frame size is 9000 (= 0x2328) if + * jumbo frame support is enabled, PORT_JUMBO_EN bit will be enabled + * based on mtu in lan937x_change_mtu() API + */ + return FR_MAX_SIZE; +} + +static int lan937x_port_pre_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + return -EOPNOTSUPP; +} + +static int lan937x_port_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + return -EOPNOTSUPP; +} + +const struct dsa_switch_ops lan937x_switch_ops = { + .get_tag_protocol = lan937x_get_tag_protocol, + .setup = lan937x_setup, + .phy_read = lan937x_phy_read16, + .phy_write = lan937x_phy_write16, + .port_enable = ksz_enable_port, + .port_bridge_join = ksz_port_bridge_join, + .port_bridge_leave = ksz_port_bridge_leave, + .port_pre_bridge_flags = lan937x_port_pre_bridge_flags, + .port_bridge_flags = lan937x_port_bridge_flags, + .port_stp_state_set = lan937x_port_stp_state_set, + .port_fast_age = ksz_port_fast_age, + .port_max_mtu = lan937x_get_max_mtu, + .port_change_mtu = lan937x_change_mtu, +}; + +int lan937x_switch_register(struct ksz_device *dev) +{ + int ret; + + ret = ksz_switch_register(dev, &lan937x_dev_ops); + + if (ret) { + if (dev->mdio_np) { + mdiobus_unregister(dev->ds->slave_mii_bus); + of_node_put(dev->mdio_np); + } + } + + return ret; +} +EXPORT_SYMBOL(lan937x_switch_register); + +MODULE_AUTHOR("Prasanna Vengateshan Varadharajan "); +MODULE_DESCRIPTION("Microchip LAN937x Series Switch DSA Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/microchip/lan937x_reg.h b/drivers/net/dsa/microchip/lan937x_reg.h new file mode 100644 index 000000000000..fba7f9ff57a0 --- /dev/null +++ b/drivers/net/dsa/microchip/lan937x_reg.h @@ -0,0 +1,710 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Microchip LAN937X switch register definitions + * Copyright (C) 2019-2021 Microchip Technology Inc. + */ +#ifndef __LAN937X_REG_H +#define __LAN937X_REG_H + +/* 0 - Operation */ +#define REG_CHIP_ID0__1 0x0000 +#define REG_CHIP_ID1__1 0x0001 +#define REG_CHIP_ID2__1 0x0002 + +#define CHIP_ID_74 0x74 +#define CHIP_ID_73 0x73 +#define CHIP_ID_72 0x72 +#define CHIP_ID_71 0x71 +#define CHIP_ID_70 0x70 + +#define REG_CHIP_ID3__1 0x0003 + +#define REG_GLOBAL_CTRL_0 0x0007 + +#define SW_PHY_REG_BLOCK BIT(7) +#define SW_FAST_MODE BIT(3) +#define SW_FAST_MODE_OVERRIDE BIT(2) + +#define REG_GLOBAL_OPTIONS 0x000F + +#define REG_SW_INT_STATUS__4 0x0010 +#define REG_SW_INT_MASK__4 0x0014 + +#define LUE_INT BIT(31) +#define TRIG_TS_INT BIT(30) +#define APB_TIMEOUT_INT BIT(29) +#define OVER_TEMP_INT BIT(28) +#define HSR_INT BIT(27) +#define PIO_INT BIT(26) +#define POR_READY_INT BIT(25) + +#define SWITCH_INT_MASK \ + (LUE_INT | TRIG_TS_INT | APB_TIMEOUT_INT | OVER_TEMP_INT | HSR_INT | \ + PIO_INT | POR_READY_INT) + +#define REG_SW_PORT_INT_STATUS__4 0x0018 +#define REG_SW_PORT_INT_MASK__4 0x001C + +/* 1 - Global */ +#define REG_SW_GLOBAL_SERIAL_CTRL_0 0x0100 + +#define SW_LITTLE_ENDIAN BIT(4) +#define SPI_AUTO_EDGE_DETECTION BIT(1) +#define SPI_CLOCK_OUT_RISING_EDGE BIT(0) + +#define REG_SW_GLOBAL_OUTPUT_CTRL__1 0x0103 +#define SW_CLK125_ENB BIT(1) +#define SW_CLK25_ENB BIT(0) + +/* 2 - PHY */ +#define REG_SW_POWER_MANAGEMENT_CTRL 0x0201 + +/* 3 - Operation Control */ +#define REG_SW_OPERATION 0x0300 + +#define SW_DOUBLE_TAG BIT(7) +#define SW_OVER_TEMP_ENABLE BIT(2) +#define SW_RESET BIT(1) +#define SW_START BIT(0) + +#define REG_SW_LUE_CTRL_0 0x0310 +#define SW_VLAN_ENABLE BIT(7) +#define SW_DROP_INVALID_VID BIT(6) +#define SW_AGE_CNT_M 0x7 +#define SW_AGE_CNT_S 3 +#define SW_RESV_MCAST_ENABLE BIT(2) + +#define REG_SW_LUE_CTRL_1 0x0311 + +#define UNICAST_LEARN_DISABLE BIT(7) +#define SW_SRC_ADDR_FILTER BIT(6) +#define SW_FLUSH_STP_TABLE BIT(5) +#define SW_FLUSH_MSTP_TABLE BIT(4) +#define SW_FWD_MCAST_SRC_ADDR BIT(3) +#define SW_AGING_ENABLE BIT(2) +#define SW_FAST_AGING BIT(1) +#define SW_LINK_AUTO_AGING BIT(0) + +#define REG_SW_LUE_CTRL_2 0x0312 + +#define SW_MID_RANGE_AGE BIT(7) +#define SW_LINK_DOWN_FLUSH BIT(6) +#define SW_EGRESS_VLAN_FILTER_DYN BIT(5) +#define SW_EGRESS_VLAN_FILTER_STA BIT(4) +#define SW_FLUSH_OPTION_M 0x3 +#define SW_FLUSH_OPTION_S 2 +#define SW_FLUSH_OPTION_DYN_MAC 1 +#define SW_FLUSH_OPTION_STA_MAC 2 +#define SW_FLUSH_OPTION_BOTH 3 + +#define REG_SW_LUE_CTRL_3 0x0313 +#define REG_SW_AGE_PERIOD__1 0x0313 + +#define REG_SW_LUE_INT_STATUS__1 0x0314 +#define REG_SW_LUE_INT_MASK__1 0x0315 + +#define LEARN_FAIL_INT BIT(2) +#define WRITE_FAIL_INT BIT(0) + +#define LUE_INT_MASK (LEARN_FAIL_INT | WRITE_FAIL_INT) + +#define REG_SW_LUE_INDEX_0__2 0x0316 + +#define ENTRY_INDEX_M 0x0FFF + +#define REG_SW_LUE_INDEX_1__2 0x0318 + +#define FAIL_INDEX_M 0x03FF + +#define REG_SW_LUE_INDEX_2__2 0x031A + +#define REG_SW_STATIC_AVAIL_ENTRY__4 0x031C + +#define SW_INGRESS_FILTERING_NO_LEARN BIT(15) +#define SW_STATIC_AVAIL_CNT 0x1FF + +#define REG_SW_AGE_PERIOD__2 0x0320 +#define SW_AGE_PERIOD_M 0xFFF + +#define REG_SW_LUE_UNK_UCAST_CTRL__2 0x0322 +#define REG_SW_LUE_UNK_CTRL_0__4 0x0322 + +#define SW_UNK_UCAST_ENABLE BIT(15) +#define SW_UNK_PORTS_M 0xFF + +#define REG_SW_LUE_UNK_MCAST_CTRL__2 0x0324 +#define SW_UNK_MCAST_ENABLE BIT(15) + +#define REG_SW_LUE_UNK_VID_CTRL__2 0x0326 +#define SW_UNK_VID_ENABLE BIT(15) + +#define SW_VLAN_FLUSH_PORTS_M 0xFF + +#define REG_SW_STATIC_ENTRY_LIMIT__4 0x032C + +#define REG_SW_MAC_CTRL_0 0x0330 +#define SW_NEW_BACKOFF BIT(7) +#define SW_PAUSE_UNH_MODE BIT(1) +#define SW_AGGR_BACKOFF BIT(0) + +#define REG_SW_MAC_CTRL_1 0x0331 +#define SW_SHORT_IFG BIT(7) +#define MULTICAST_STORM_DISABLE BIT(6) +#define SW_BACK_PRESSURE BIT(5) +#define FAIR_FLOW_CTRL BIT(4) +#define NO_EXC_COLLISION_DROP BIT(3) +#define SW_LEGAL_PACKET_DISABLE BIT(1) +#define SW_PASS_SHORT_FRAME BIT(0) + +#define REG_SW_MAC_CTRL_2 0x0332 +#define SW_REPLACE_VID BIT(3) +#define BROADCAST_STORM_RATE_HI 0x07 + +#define REG_SW_MAC_CTRL_3 0x0333 +#define BROADCAST_STORM_RATE_LO 0xFF +#define BROADCAST_STORM_RATE 0x07FF + +#define REG_SW_MAC_CTRL_4 0x0334 +#define SW_PASS_PAUSE BIT(3) + +#define REG_SW_MAC_CTRL_5 0x0335 +#define SW_OUT_RATE_LIMIT_QUEUE_BASED BIT(3) + +#define REG_SW_MAC_CTRL_6 0x0336 +#define SW_MIB_COUNTER_FLUSH BIT(7) +#define SW_MIB_COUNTER_FREEZE BIT(6) + +#define REG_SW_MRI_CTRL_0 0x0370 +#define SW_IGMP_SNOOP BIT(6) +#define SW_IPV6_MLD_OPTION BIT(3) +#define SW_IPV6_MLD_SNOOP BIT(2) +#define SW_MIRROR_RX_TX BIT(0) + +#define REG_SW_MRI_CTRL_1__4 0x0374 +#define REG_SW_MRI_CTRL_2__4 0x0378 +#define REG_SW_CLASS_D_IP_CTRL__4 0x0374 + +#define SW_CLASS_D_IP_ENABLE BIT(31) + +#define REG_SW_MRI_CTRL_8 0x0378 +#define SW_RED_COLOR_S 4 +#define SW_YELLOW_COLOR_S 2 +#define SW_GREEN_COLOR_S 0 +#define SW_COLOR_M 0x3 + +#define REG_PTP_EVENT_PRIO_CTRL 0x037C +#define REG_PTP_GENERAL_PRIO_CTRL 0x037D +#define PTP_PRIO_ENABLE BIT(7) + +#define REG_SW_QM_CTRL__4 0x0390 +#define PRIO_SCHEME_SELECT_M KS_PRIO_M +#define PRIO_SCHEME_SELECT_S 6 +#define PRIO_MAP_3_HI 0 +#define PRIO_MAP_2_HI 2 +#define PRIO_MAP_0_LO 3 +#define UNICAST_VLAN_BOUNDARY BIT(1) + +#define REG_SW_EEE_QM_CTRL__2 0x03C0 +#define REG_SW_EEE_TXQ_WAIT_TIME__2 0x03C2 + +/* 4 - */ +#define REG_SW_VLAN_ENTRY__4 0x0400 +#define VLAN_VALID BIT(31) +#define VLAN_FORWARD_OPTION BIT(27) +#define VLAN_PRIO_M KS_PRIO_M +#define VLAN_PRIO_S 24 +#define VLAN_MSTP_M 0x7 +#define VLAN_MSTP_S 12 +#define VLAN_FID_M 0x7F + +#define REG_SW_VLAN_ENTRY_UNTAG__4 0x0404 +#define REG_SW_VLAN_ENTRY_PORTS__4 0x0408 +#define REG_SW_VLAN_ENTRY_INDEX__2 0x040C + +#define VLAN_INDEX_M 0x0FFF + +#define REG_SW_VLAN_CTRL 0x040E +#define VLAN_START BIT(7) +#define VLAN_ACTION 0x3 +#define VLAN_WRITE 1 +#define VLAN_READ 2 +#define VLAN_CLEAR 3 + +#define REG_SW_ALU_INDEX_0 0x0410 +#define ALU_FID_INDEX_S 16 +#define ALU_FID_SIZE 127 +#define ALU_MAC_ADDR_HI 0xFFFF + +#define REG_SW_ALU_INDEX_1 0x0414 +#define ALU_DIRECT_INDEX_M (BIT(12) - 1) + +#define REG_SW_ALU_CTRL__4 0x0418 +#define REG_SW_ALU_CTRL(num) (REG_SW_ALU_CTRL__4 + ((num) * 4)) + +#define ALU_STA_DYN_CNT 2 +#define ALU_VALID_CNT_M (BIT(14) - 1) +#define ALU_VALID_CNT_S 16 +#define ALU_START BIT(7) +#define ALU_VALID BIT(6) +#define ALU_VALID_OR_STOP BIT(5) +#define ALU_DIRECT BIT(2) +#define ALU_ACTION 0x3 +#define ALU_WRITE 1 +#define ALU_READ 2 +#define ALU_SEARCH 3 + +#define REG_SW_ALU_STAT_CTRL__4 0x041C +#define ALU_STAT_VALID_CNT_M (BIT(9) - 1) +#define ALU_STAT_VALID_CNT_S 20 +#define ALU_STAT_INDEX_M (BIT(8) - 1) +#define ALU_STAT_INDEX_S 8 +#define ALU_RESV_MCAST_INDEX_M (BIT(6) - 1) +#define ALU_STAT_START BIT(7) +#define ALU_STAT_VALID BIT(6) +#define ALU_STAT_VALID_OR_STOP BIT(5) +#define ALU_STAT_USE_FID BIT(4) +#define ALU_STAT_DIRECT BIT(3) +#define ALU_RESV_MCAST_ADDR BIT(2) +#define ALU_STAT_ACTION 0x3 +#define ALU_STAT_WRITE 1 +#define ALU_STAT_READ 2 +#define ALU_STAT_SEARCH 3 + +#define REG_SW_ALU_VAL_A 0x0420 +#define ALU_V_STATIC_VALID BIT(31) +#define ALU_V_SRC_FILTER BIT(30) +#define ALU_V_DST_FILTER BIT(29) +#define ALU_V_PRIO_AGE_CNT_M (BIT(3) - 1) +#define ALU_V_PRIO_AGE_CNT_S 26 +#define ALU_V_MSTP_M 0x7 + +#define REG_SW_ALU_VAL_B 0x0424 +#define ALU_V_OVERRIDE BIT(31) +#define ALU_V_USE_FID BIT(30) +#define ALU_V_PORT_MAP 0xFF + +#define REG_SW_ALU_VAL_C 0x0428 +#define ALU_V_FID_M (BIT(16) - 1) +#define ALU_V_FID_S 16 +#define ALU_V_MAC_ADDR_HI 0xFFFF + +#define REG_SW_ALU_VAL_D 0x042C + +#define PORT_CTRL_ADDR(port, addr) ((addr) | (((port) + 1) << 12)) + +#define REG_GLOBAL_RR_INDEX__1 0x0600 + +/* VPHY */ +#define REG_VPHY_CTRL__2 0x0700 +#define REG_VPHY_STAT__2 0x0704 +#define REG_VPHY_ID_HI__2 0x0708 +#define REG_VPHY_ID_LO__2 0x070C +#define REG_VPHY_AUTO_NEG__2 0x0710 +#define REG_VPHY_REMOTE_CAP__2 0x0714 + +#define REG_VPHY_EXPANSION__2 0x0718 + +#define REG_VPHY_M_CTRL__2 0x0724 +#define REG_VPHY_M_STAT__2 0x0728 + +#define REG_VPHY_EXT_STAT__2 0x073C +#define VPHY_EXT_1000_X_FULL BIT(15) +#define VPHY_EXT_1000_X_HALF BIT(14) +#define VPHY_EXT_1000_T_FULL BIT(13) +#define VPHY_EXT_1000_T_HALF BIT(12) + +#define REG_VPHY_DEVAD_0__2 0x0740 +#define REG_VPHY_DEVAD_1__2 0x0744 +#define REG_VPHY_DEVAD_2__2 0x0748 +#define REG_VPHY_DEVAD_3__2 0x074C + +#define VPHY_DEVAD_UPDATE BIT(7) +#define VPHY_DEVAD_M 0x1F +#define VPHY_DEVAD_S 8 + +#define REG_VPHY_SMI_ADDR__2 0x0750 +#define REG_VPHY_SMI_DATA_LO__2 0x0754 +#define REG_VPHY_SMI_DATA_HI__2 0x0758 + +#define REG_VPHY_IND_ADDR__2 0x075C +#define REG_VPHY_IND_DATA__2 0x0760 +#define REG_VPHY_IND_CTRL__2 0x0768 + +#define VPHY_IND_WRITE BIT(1) +#define VPHY_IND_BUSY BIT(0) + +#define REG_VPHY_SPECIAL_CTRL__2 0x077C +#define VPHY_SMI_INDIRECT_ENABLE BIT(15) +#define VPHY_SW_LOOPBACK BIT(14) +#define VPHY_MDIO_INTERNAL_ENABLE BIT(13) +#define VPHY_SPI_INDIRECT_ENABLE BIT(12) +#define VPHY_PORT_MODE_M 0x3 +#define VPHY_PORT_MODE_S 8 +#define VPHY_MODE_RGMII 0 +#define VPHY_MODE_MII_PHY 1 +#define VPHY_MODE_SGMII 2 +#define VPHY_MODE_RMII_PHY 3 +#define VPHY_SW_COLLISION_TEST BIT(7) +#define VPHY_SPEED_DUPLEX_STAT_M 0x7 +#define VPHY_SPEED_DUPLEX_STAT_S 2 +#define VPHY_SPEED_1000 BIT(4) +#define VPHY_SPEED_100 BIT(3) +#define VPHY_FULL_DUPLEX BIT(2) + +/* 0 - Operation */ +#define REG_PORT_DEFAULT_VID 0x0000 + +#define REG_PORT_CUSTOM_VID 0x0002 +#define REG_PORT_PME_STATUS 0x0013 + +#define REG_PORT_PME_CTRL 0x0017 +#define PME_WOL_MAGICPKT BIT(2) +#define PME_WOL_LINKUP BIT(1) +#define PME_WOL_ENERGY BIT(0) + +#define REG_PORT_INT_STATUS 0x001B +#define REG_PORT_INT_MASK 0x001F + +#define PORT_TAS_INT BIT(5) +#define PORT_SGMII_INT BIT(3) +#define PORT_PTP_INT BIT(2) +#define PORT_PHY_INT BIT(1) +#define PORT_ACL_INT BIT(0) + +#define PORT_INT_MASK \ + ( \ + PORT_TAS_INT | \ + PORT_SGMII_INT | PORT_PTP_INT | PORT_PHY_INT | PORT_ACL_INT) + +#define REG_PORT_CTRL_0 0x0020 + +#define PORT_MAC_LOOPBACK BIT(7) +#define PORT_MAC_REMOTE_LOOPBACK BIT(6) +#define PORT_K2L_INSERT_ENABLE BIT(5) +#define PORT_K2L_DEBUG_ENABLE BIT(4) +#define PORT_TAIL_TAG_ENABLE BIT(2) +#define PORT_QUEUE_SPLIT_ENABLE 0x3 + +#define REG_PORT_CTRL_1 0x0021 +#define PORT_SRP_ENABLE 0x3 + +#define REG_PORT_STATUS_0 0x0030 +#define PORT_INTF_SPEED_M 0x3 +#define PORT_INTF_SPEED_S 3 +#define PORT_INTF_FULL_DUPLEX BIT(2) +#define PORT_TX_FLOW_CTRL BIT(1) +#define PORT_RX_FLOW_CTRL BIT(0) + +#define REG_PORT_STATUS_1 0x0034 + +/* 1 - PHY */ +#define REG_VPHY_SMI_ADDR 0x14 +#define REG_VPHY_SMI_DATA_LO 0x15 +#define REG_VPHY_SMI_DATA_HI 0x16 + +#define REG_VPHY_SPECIAL_CTRL_STAT 0x1F + +#define REG_PORT_T1_PHY_CTRL_BASE 0x0100 +#define REG_PORT_TX_PHY_CTRL_BASE 0x0280 +#define REG_TX_PHY_CTRL_BASE 0x0980 + +#define REG_PORT_PHY_CTRL 0x0100 + +#define PORT_PHY_RESET BIT(15) +#define PORT_PHY_LOOPBACK BIT(14) +#define PORT_SPEED_100MBIT BIT(13) +#define PORT_AUTO_NEG_ENABLE BIT(12) +#define PORT_POWER_DOWN BIT(11) +#define PORT_ISOLATE BIT(10) +#define PORT_AUTO_NEG_RESTART BIT(9) +#define PORT_FULL_DUPLEX BIT(8) +#define PORT_COLLISION_TEST BIT(7) +#define PORT_SPEED_1000MBIT BIT(6) + +#define REG_PORT_PHY_STATUS 0x0102 + +#define PORT_100BT4_CAPABLE BIT(15) +#define PORT_100BTX_FD_CAPABLE BIT(14) +#define PORT_100BTX_CAPABLE BIT(13) +#define PORT_10BT_FD_CAPABLE BIT(12) +#define PORT_10BT_CAPABLE BIT(11) +#define PORT_EXTENDED_STATUS BIT(8) +#define PORT_MII_SUPPRESS_CAPABLE BIT(6) +#define PORT_AUTO_NEG_ACKNOWLEDGE BIT(5) +#define PORT_REMOTE_FAULT BIT(4) +#define PORT_AUTO_NEG_CAPABLE BIT(3) +#define PORT_LINK_STATUS BIT(2) +#define PORT_JABBER_DETECT BIT(1) +#define PORT_EXTENDED_CAPABILITY BIT(0) + +#define REG_PORT_PHY_ID_HI 0x0104 +#define REG_PORT_PHY_ID_LO 0x0106 + +#define LAN937X_ID_HI 0x0007 +#define LAN937X_ID_LO 0x1951 + +#define REG_PORT_PHY_1000_CTRL 0x0112 +#define PORT_AUTO_NEG_MANUAL BIT(12) +#define PORT_AUTO_NEG_M BIT(11) +#define PORT_AUTO_NEG_M_PREFERRED BIT(10) +#define PORT_AUTO_NEG_1000BT_FD BIT(9) +#define PORT_AUTO_NEG_1000BT BIT(8) + +#define REG_PORT_PHY_1000_STATUS 0x0114 + +#define REG_PORT_PHY_RXER_COUNTER 0x012A +#define REG_PORT_PHY_INT_ENABLE 0x0136 +#define REG_PORT_PHY_INT_STATUS 0x0137 + +/* Same as PORT_PHY_LOOPBACK */ +#define PORT_PHY_PCS_LOOPBACK BIT(0) + +#define REG_PORT_PHY_DIGITAL_DEBUG_2 0x013A + +#define REG_PORT_PHY_DIGITAL_DEBUG_3 0x013C +#define PORT_100BT_FIXED_LATENCY BIT(15) + +#define REG_PORT_PHY_PHY_CTRL 0x013E +#define PORT_INT_PIN_HIGH BIT(14) +#define PORT_ENABLE_JABBER BIT(9) +#define PORT_STAT_SPEED_1000MBIT BIT(6) +#define PORT_STAT_SPEED_100MBIT BIT(5) +#define PORT_STAT_SPEED_10MBIT BIT(4) +#define PORT_STAT_FULL_DUPLEX BIT(3) + +/* Same as PORT_PHY_STAT_M */ +#define PORT_STAT_M BIT(2) +#define PORT_RESET BIT(1) +#define PORT_LINK_STATUS_FAIL BIT(0) + +/* 3 - xMII */ +#define REG_PORT_XMII_CTRL_0 0x0300 +#define PORT_SGMII_SEL BIT(7) +#define PORT_MII_FULL_DUPLEX BIT(6) +#define PORT_MII_TX_FLOW_CTRL BIT(5) +#define PORT_MII_100MBIT BIT(4) +#define PORT_MII_RX_FLOW_CTRL BIT(3) +#define PORT_GRXC_ENABLE BIT(0) + +#define REG_PORT_XMII_CTRL_1 0x0301 +#define PORT_MII_NOT_1GBIT BIT(6) +#define PORT_MII_SEL_EDGE BIT(5) +#define PORT_RGMII_ID_IG_ENABLE BIT(4) +#define PORT_RGMII_ID_EG_ENABLE BIT(3) +#define PORT_MII_MAC_MODE BIT(2) +#define PORT_MII_SEL_M 0x3 +#define PORT_RGMII_SEL 0x0 +#define PORT_RMII_SEL 0x1 +#define PORT_MII_SEL 0x2 + +#define REG_PORT_XMII_CTRL_2 0x0302 +#define PORT_RGMII_RX_STS_ENABLE BIT(0) + +#define REG_PORT_XMII_CTRL_4 0x0304 +#define REG_PORT_XMII_CTRL_5 0x0305 + +/* 4 - MAC */ +#define REG_PORT_MAC_CTRL_0 0x0400 +#define PORT_CHECK_LENGTH BIT(2) +#define PORT_BROADCAST_STORM BIT(1) +#define PORT_JUMBO_PACKET BIT(0) + +#define REG_PORT_MAC_CTRL_1 0x0401 +#define PORT_BACK_PRESSURE BIT(3) +#define PORT_PASS_ALL BIT(0) + +#define REG_PORT_MAC_CTRL_2 0x0402 +#define PORT_100BT_EEE_DISABLE BIT(7) +#define PORT_1000BT_EEE_DISABLE BIT(6) + +#define REG_PORT_MAC_IN_RATE_LIMIT 0x0403 + +#define REG_PORT_MTU__2 0x0404 +#define PORT_RATE_LIMIT_M (BIT(7) - 1) + +/* 5 - MIB Counters */ +#define REG_PORT_MIB_CTRL_STAT__4 0x0500 +#define MIB_COUNTER_OVERFLOW BIT(31) +#define MIB_COUNTER_VALID BIT(30) +#define MIB_COUNTER_READ BIT(25) +#define MIB_COUNTER_FLUSH_FREEZE BIT(24) +#define MIB_COUNTER_INDEX_M (BIT(8) - 1) +#define MIB_COUNTER_INDEX_S 16 +#define MIB_COUNTER_DATA_HI_M 0xF + +#define REG_PORT_MIB_DATA 0x0504 + +/* 8 - Classification and Policing */ +#define REG_PORT_MRI_MIRROR_CTRL 0x0800 +#define PORT_MIRROR_RX BIT(6) +#define PORT_MIRROR_TX BIT(5) +#define PORT_MIRROR_SNIFFER BIT(1) + +#define REG_PORT_MRI_PRIO_CTRL 0x0801 +#define PORT_HIGHEST_PRIO BIT(7) +#define PORT_OR_PRIO BIT(6) +#define PORT_MAC_PRIO_ENABLE BIT(4) +#define PORT_VLAN_PRIO_ENABLE BIT(3) +#define PORT_802_1P_PRIO_ENABLE BIT(2) +#define PORT_DIFFSERV_PRIO_ENABLE BIT(1) +#define PORT_ACL_PRIO_ENABLE BIT(0) + +#define REG_PORT_MRI_MAC_CTRL 0x0802 +#define PORT_USER_PRIO_CEILING BIT(7) +#define PORT_DROP_NON_VLAN BIT(4) +#define PORT_DROP_TAG BIT(3) +#define PORT_BASED_PRIO_M KS_PRIO_M +#define PORT_BASED_PRIO_S 0 + +#define REG_PORT_MRI_TC_MAP__4 0x0808 + +/* 9 - Shaping */ +#define REG_PORT_MTI_QUEUE_INDEX__4 0x0900 + +#define REG_PORT_MTI_QUEUE_CTRL_0__4 0x0904 +#define MTI_PVID_REPLACE BIT(0) + +#define REG_PORT_MTI_QUEUE_CTRL_0 0x0914 + +/* A - QM */ +#define REG_PORT_QM_CTRL__4 0x0A00 +#define PORT_QM_DROP_PRIO_M 0x3 + +#define REG_PORT_VLAN_MEMBERSHIP__4 0x0A04 + +#define REG_PORT_QM_QUEUE_INDEX__4 0x0A08 +#define PORT_QM_QUEUE_INDEX_S 24 +#define PORT_QM_BURST_SIZE_S 16 +#define PORT_QM_MIN_RESV_SPACE_M (BIT(11) - 1) + +#define REG_PORT_QM_WATER_MARK__4 0x0A0C +#define PORT_QM_HI_WATER_MARK_S 16 +#define PORT_QM_LO_WATER_MARK_S 0 +#define PORT_QM_WATER_MARK_M (BIT(11) - 1) + +#define REG_PORT_QM_TX_CNT_0__4 0x0A10 +#define PORT_QM_TX_CNT_USED_S 0 +#define PORT_QM_TX_CNT_M (BIT(11) - 1) + +#define REG_PORT_QM_TX_CNT_1__4 0x0A14 +#define PORT_QM_TX_CNT_CALCULATED_S 16 +#define PORT_QM_TX_CNT_AVAIL_S 0 + +/* B - LUE */ +#define REG_PORT_LUE_CTRL 0x0B00 + +#define PORT_VLAN_LOOKUP_VID_0 BIT(7) +#define PORT_INGRESS_FILTER BIT(6) +#define PORT_DISCARD_NON_VID BIT(5) +#define PORT_MAC_BASED_802_1X BIT(4) +#define PORT_SRC_ADDR_FILTER BIT(3) + +#define REG_PORT_LUE_MSTP_INDEX 0x0B01 + +#define REG_PORT_LUE_MSTP_STATE 0x0B04 + +#define PORT_TX_ENABLE BIT(2) +#define PORT_RX_ENABLE BIT(1) +#define PORT_LEARN_DISABLE BIT(0) + +#define REG_PORT_LUE_LEARN_CNT__2 0x0B08 + +#define REG_PORT_LUE_UNK_CTL0 0x0B0E +#define REG_PORT_LUE_UNK_CTL1 0x0B10 +#define REG_PORT_LUE_UNK_VID_CTRL__2 0x0B12 + +#define PORT_UNK_UCAST_MCAST_ENABLE BIT(15) +#define PORT_UCAST_MCAST_MASK 0xFF +#define PORT_UNK_VID_ENABLE BIT(15) + +#define PRIO_QUEUES 8 +#define RX_PRIO_QUEUES 8 +#define KS_PRIO_IN_REG 2 +#define TOTAL_PORT_NUM 8 + +#define LAN937X_COUNTER_NUM 0x20 +#define TOTAL_LAN937X_COUNTER_NUM (LAN937X_COUNTER_NUM + 2 + 2) + +#define SWITCH_COUNTER_NUM LAN937X_COUNTER_NUM + +#define P_BCAST_STORM_CTRL REG_PORT_MAC_CTRL_0 +#define P_PRIO_CTRL REG_PORT_MRI_PRIO_CTRL +#define P_MIRROR_CTRL REG_PORT_MRI_MIRROR_CTRL +#define P_STP_CTRL REG_PORT_LUE_MSTP_STATE +#define P_PHY_CTRL REG_PORT_PHY_CTRL +#define P_NEG_RESTART_CTRL REG_PORT_PHY_CTRL +#define P_LINK_STATUS REG_PORT_PHY_STATUS +#define P_SPEED_STATUS REG_PORT_PHY_PHY_CTRL +#define P_RATE_LIMIT_CTRL REG_PORT_MAC_IN_RATE_LIMIT + +#define S_LINK_AGING_CTRL REG_SW_LUE_CTRL_1 +#define S_MIRROR_CTRL REG_SW_MRI_CTRL_0 +#define S_REPLACE_VID_CTRL REG_SW_MAC_CTRL_2 +#define S_802_1P_PRIO_CTRL REG_SW_MAC_802_1P_MAP_0 +#define S_TOS_PRIO_CTRL REG_SW_MAC_TOS_PRIO_0 +#define S_FLUSH_TABLE_CTRL REG_SW_LUE_CTRL_1 + +#define REG_SWITCH_RESET REG_RESET_CTRL + +#define SW_FLUSH_DYN_MAC_TABLE SW_FLUSH_MSTP_TABLE + +#define MAX_TIMESTAMP_UNIT 2 +#define MAX_TRIG_UNIT 3 +#define MAX_TIMESTAMP_EVENT_UNIT 8 +#define MAX_GPIO 2 +#define MAX_CLOCK 2 + +#define PTP_TRIG_UNIT_M (BIT(MAX_TRIG_UNIT) - 1) +#define PTP_TS_UNIT_M (BIT(MAX_TIMESTAMP_UNIT) - 1) + +#define TAIL_TAG_PTP BIT(7) +#define TAIL_TAG_NEXT_CHIP BIT(6) +#define TAIL_TAG_K2L BIT(5) +#define TAIL_TAG_PTP_1_STEP BIT(4) +#define TAIL_TAG_PTP_P2P BIT(3) +#define TAIL_TAG_RX_PORTS_M 0x7 + +/* 148,800 frames * 67 ms / 100 */ +#define BROADCAST_STORM_VALUE 9969 + +#define SW_CHECK_LENGTH BIT(3) + +#define FR_MIN_SIZE 1522 +#define FR_MAX_SIZE 9000 + +#define PORT_JUMBO_EN BIT(0) +#define PORT_FR_CHK_LENGTH BIT(2) +#define PORT_MAX_FR_SIZE 0x404 + +#define FR_SIZE_CPU_PORT 1540 + +#define REG_PORT_CTRL_0 0x0020 +#define PORT_MAC_LOOPBACK BIT(7) +#define PORT_FORCE_TX_FLOW_CTRL BIT(5) +#define PORT_FORCE_RX_FLOW_CTRL BIT(3) + +#define PORT_QUEUE_SPLIT_ENABLE 0x3 + +/* Get fid from vid, fid 0 is not used if vid is greater than 127 */ +#define LAN937X_GET_FID(vid) (((vid) % ALU_FID_SIZE) + 1) + +/* Driver set switch broadcast storm protection at 10% rate. */ +#define BROADCAST_STORM_PROT_RATE 10 + +#define MII_BMSR_100BASE_TX_FD BIT(14) + +#define PHY_LINK_UP 1 +#define PHY_LINK_DOWN 0 + +/*The port number as per the datasheet*/ +#define RGMII_2_PORT_NUM 5 +#define RGMII_1_PORT_NUM 6 +#define SGMII_PORT_NUM 4 +#define TXPHY_PORT_NUM 4 + +#define GET_CHIP_ID_LSB(chip_id) (((chip_id) >> 8) & 0xff) +#define LAN937X_RGMII_2_PORT (RGMII_2_PORT_NUM - 1) +#define LAN937X_RGMII_1_PORT (RGMII_1_PORT_NUM - 1) +#define LAN937X_SGMII_PORT (SGMII_PORT_NUM - 1) +#define LAN937X_TXPHY_PORT (TXPHY_PORT_NUM - 1) + +#endif diff --git a/drivers/net/dsa/microchip/lan937x_spi.c b/drivers/net/dsa/microchip/lan937x_spi.c new file mode 100644 index 000000000000..d9731d6afb96 --- /dev/null +++ b/drivers/net/dsa/microchip/lan937x_spi.c @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Microchip LAN937X switch driver register access through SPI + * Copyright (C) 2019-2021 Microchip Technology Inc. + */ +#include + +#include +#include +#include +#include +#include +#include + +#include "ksz_common.h" + +#define SPI_ADDR_SHIFT 24 +#define SPI_ADDR_ALIGN 3 +#define SPI_TURNAROUND_SHIFT 5 + +KSZ_REGMAP_TABLE(lan937x, 32, SPI_ADDR_SHIFT, + SPI_TURNAROUND_SHIFT, SPI_ADDR_ALIGN); + +struct lan937x_chip_data { + u32 chip_id; + const char *dev_name; + int num_vlans; + int num_alus; + int num_statics; + int cpu_ports; + int port_cnt; +}; + +static const struct of_device_id lan937x_dt_ids[]; + +static const struct lan937x_chip_data lan937x_switch_chips[] = { + { + .chip_id = 0x00937010, + .dev_name = "LAN9370", + .num_vlans = 4096, + .num_alus = 1024, + .num_statics = 256, + /* can be configured as cpu port */ + .cpu_ports = 0x10, + /* total port count */ + .port_cnt = 5, + }, + { + .chip_id = 0x00937110, + .dev_name = "LAN9371", + .num_vlans = 4096, + .num_alus = 1024, + .num_statics = 256, + /* can be configured as cpu port */ + .cpu_ports = 0x30, + /* total port count */ + .port_cnt = 6, + }, + { + .chip_id = 0x00937210, + .dev_name = "LAN9372", + .num_vlans = 4096, + .num_alus = 1024, + .num_statics = 256, + /* can be configured as cpu port */ + .cpu_ports = 0x30, + /* total port count */ + .port_cnt = 8, + }, + { + .chip_id = 0x00937310, + .dev_name = "LAN9373", + .num_vlans = 4096, + .num_alus = 1024, + .num_statics = 256, + /* can be configured as cpu port */ + .cpu_ports = 0x38, + /* total port count */ + .port_cnt = 5, + }, + { + .chip_id = 0x00937410, + .dev_name = "LAN9374", + .num_vlans = 4096, + .num_alus = 1024, + .num_statics = 256, + /* can be configured as cpu port */ + .cpu_ports = 0x30, + /* total port count */ + .port_cnt = 8, + }, + +}; + +static int lan937x_spi_probe(struct spi_device *spi) +{ + struct regmap_config rc; + struct ksz_device *dev; + int i, ret; + + dev = ksz_switch_alloc(&spi->dev, spi); + if (!dev) + return -ENOMEM; + + for (i = 0; i < ARRAY_SIZE(lan937x_regmap_config); i++) { + rc = lan937x_regmap_config[i]; + rc.lock_arg = &dev->regmap_mutex; + dev->regmap[i] = devm_regmap_init_spi(spi, &rc); + if (IS_ERR(dev->regmap[i])) { + ret = PTR_ERR(dev->regmap[i]); + dev_err(&spi->dev, + "Failed to initialize regmap%i: %d\n", + lan937x_regmap_config[i].val_bits, ret); + return ret; + } + } + + if (spi->dev.platform_data) + dev->pdata = spi->dev.platform_data; + + ret = lan937x_switch_register(dev); + + /* Main DSA driver may not be started yet. */ + if (ret) + return ret; + + spi_set_drvdata(spi, dev); + + return 0; +} + +int lan937x_check_device_id(struct ksz_device *dev) +{ + const struct lan937x_chip_data *dt_chip_data; + const struct of_device_id *match; + int i; + + dt_chip_data = of_device_get_match_data(dev->dev); + + if (!dt_chip_data) + return -EINVAL; + + for (match = lan937x_dt_ids; match->compatible[0]; match++) { + const struct lan937x_chip_data *chip_data = match->data; + + /* Check for chip id */ + if (chip_data->chip_id != dev->chip_id) + continue; + + /* Check for Device Tree and Chip ID */ + if (dt_chip_data->chip_id != dev->chip_id) { + dev_err(dev->dev, "Device tree specifies chip %s but found %s, please fix it!\n", + dt_chip_data->dev_name, chip_data->dev_name); + return -ENODEV; + } + + break; + } + + for (i = 0; i < ARRAY_SIZE(lan937x_switch_chips); i++) { + const struct lan937x_chip_data *chip = &lan937x_switch_chips[i]; + + if (dev->chip_id == chip->chip_id) { + dev->name = chip->dev_name; + dev->num_vlans = chip->num_vlans; + dev->num_alus = chip->num_alus; + dev->num_statics = chip->num_statics; + dev->port_cnt = chip->port_cnt; + dev->cpu_ports = chip->cpu_ports; + break; + } + } + + /* no switch found */ + if (!dev->port_cnt) + return -ENODEV; + + return 0; +} +EXPORT_SYMBOL(lan937x_check_device_id); + +static int lan937x_spi_remove(struct spi_device *spi) +{ + struct ksz_device *dev = spi_get_drvdata(spi); + + if (dev) + ksz_switch_remove(dev); + + return 0; +} + +static void lan937x_spi_shutdown(struct spi_device *spi) +{ + struct ksz_device *dev = spi_get_drvdata(spi); + + if (dev && dev->dev_ops->shutdown) + dev->dev_ops->shutdown(dev); +} + +static const struct of_device_id lan937x_dt_ids[] = { + { .compatible = "microchip,lan9370", .data = &lan937x_switch_chips[0] }, + { .compatible = "microchip,lan9371", .data = &lan937x_switch_chips[1] }, + { .compatible = "microchip,lan9372", .data = &lan937x_switch_chips[2] }, + { .compatible = "microchip,lan9373", .data = &lan937x_switch_chips[3] }, + { .compatible = "microchip,lan9374", .data = &lan937x_switch_chips[4] }, + {}, +}; +MODULE_DEVICE_TABLE(of, lan937x_dt_ids); + +static struct spi_driver lan937x_spi_driver = { + .driver = { + .name = "lan937x-switch", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(lan937x_dt_ids), + }, + .probe = lan937x_spi_probe, + .remove = lan937x_spi_remove, + .shutdown = lan937x_spi_shutdown, +}; + +module_spi_driver(lan937x_spi_driver); + +MODULE_ALIAS("spi:lan937x"); + +MODULE_AUTHOR("Prasanna Vengateshan Varadharajan "); +MODULE_DESCRIPTION("Microchip LAN937x Series Switch SPI access Driver"); +MODULE_LICENSE("GPL");