@@ -245,6 +245,13 @@ config QSEMI_PHY
help
Currently supports the qs6612
+config QCA8K_PHY
+ tristate "Qualcomm Atheros AR833x Internal PHYs"
+ help
+ This PHY is for the internal PHYs present on the QCA833x switch.
+
+ Currently supports the AR8334, AR8337 model
+
config REALTEK_PHY
tristate "Realtek PHYs"
help
@@ -72,6 +72,7 @@ obj-$(CONFIG_MICROSEMI_PHY) += mscc/
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
+obj-$(CONFIG_QCA8K_PHY) += qca8k.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_RENESAS_PHY) += uPD60620.o
obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o
new file mode 100644
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/module.h>
+#include <linux/bitfield.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool_netlink.h>
+
+#define QCA8K_DEVFLAGS_REVISION_MASK GENMASK(2, 0)
+
+#define QCA8K_PHY_ID_MASK 0xffffffff
+#define QCA8K_PHY_ID_QCA8327 0x004dd034
+#define QCA8K_PHY_ID_QCA8337 0x004dd036
+
+#define MDIO_AZ_DEBUG 0x800d
+
+#define MDIO_DBG_ANALOG_TEST 0x0
+#define MDIO_DBG_SYSTEM_CONTROL_MODE 0x5
+#define MDIO_DBG_CONTROL_FEATURE_CONF 0x3d
+
+/* QCA specific MII registers */
+#define MII_ATH_DBG_ADDR 0x1d
+#define MII_ATH_DBG_DATA 0x1e
+
+/* QCA specific MII registers access function */
+static void qca8k_phy_dbg_write(struct mii_bus *bus, int phy_addr, u16 dbg_addr, u16 dbg_data)
+{
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+ bus->write(bus, phy_addr, MII_ATH_DBG_ADDR, dbg_addr);
+ bus->write(bus, phy_addr, MII_ATH_DBG_DATA, dbg_data);
+ mutex_unlock(&bus->mdio_lock);
+}
+
+enum stat_access_type {
+ PHY,
+ MMD
+};
+
+struct qca8k_hw_stat {
+ const char *string;
+ u8 reg;
+ u32 mask;
+ enum stat_access_type access_type;
+};
+
+static struct qca8k_hw_stat qca8k_hw_stats[] = {
+ { "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
+ { "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
+ { "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
+};
+
+struct qca8k_phy_priv {
+ u8 switch_revision;
+ u64 stats[ARRAY_SIZE(qca8k_hw_stats)];
+};
+
+static int qca8k_get_sset_count(struct phy_device *phydev)
+{
+ return ARRAY_SIZE(qca8k_hw_stats);
+}
+
+static void qca8k_get_strings(struct phy_device *phydev, u8 *data)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(qca8k_hw_stats); i++) {
+ strscpy(data + i * ETH_GSTRING_LEN,
+ qca8k_hw_stats[i].string, ETH_GSTRING_LEN);
+ }
+}
+
+static u64 qca8k_get_stat(struct phy_device *phydev, int i)
+{
+ struct qca8k_hw_stat stat = qca8k_hw_stats[i];
+ struct qca8k_phy_priv *priv = phydev->priv;
+ int val;
+ u64 ret;
+
+ if (stat.access_type == MMD)
+ val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg);
+ else
+ val = phy_read(phydev, stat.reg);
+
+ if (val < 0) {
+ ret = U64_MAX;
+ } else {
+ val = val & stat.mask;
+ priv->stats[i] += val;
+ ret = priv->stats[i];
+ }
+
+ return ret;
+}
+
+static void qca8k_get_stats(struct phy_device *phydev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(qca8k_hw_stats); i++)
+ data[i] = qca8k_get_stat(phydev, i);
+}
+
+static int qca8k_config_init(struct phy_device *phydev)
+{
+ struct qca8k_phy_priv *priv = phydev->priv;
+ struct mii_bus *bus = phydev->mdio.bus;
+ int phy_addr = phydev->mdio.addr;
+
+ priv->switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK;
+
+ switch (priv->switch_revision) {
+ case 1:
+ /* For 100M waveform */
+ qca8k_phy_dbg_write(bus, phy_addr, MDIO_DBG_ANALOG_TEST, 0x02ea);
+ /* Turn on Gigabit clock */
+ qca8k_phy_dbg_write(bus, phy_addr, MDIO_DBG_CONTROL_FEATURE_CONF, 0x68a0);
+ break;
+
+ case 2:
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0);
+ fallthrough;
+ case 4:
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
+ qca8k_phy_dbg_write(bus, phy_addr, MDIO_DBG_CONTROL_FEATURE_CONF, 0x6860);
+ qca8k_phy_dbg_write(bus, phy_addr, MDIO_DBG_SYSTEM_CONTROL_MODE, 0x2c46);
+ qca8k_phy_dbg_write(bus, phy_addr, 0x3c, 0x6000);
+ break;
+ }
+
+ return 0;
+}
+
+static int qca8k_probe(struct phy_device *phydev)
+{
+ struct qca8k_phy_priv *priv;
+
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ return 0;
+}
+
+static struct phy_driver qca8k_drivers[] = {
+ {
+ .phy_id = QCA8K_PHY_ID_QCA8337,
+ .phy_id_mask = QCA8K_PHY_ID_MASK,
+ .name = "QCA PHY 8337",
+ /* PHY_GBIT_FEATURES */
+ .probe = qca8k_probe,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = qca8k_config_init,
+ .soft_reset = genphy_soft_reset,
+ .get_sset_count = qca8k_get_sset_count,
+ .get_strings = qca8k_get_strings,
+ .get_stats = qca8k_get_stats,
+ },
+};
+
+module_phy_driver(qca8k_drivers);
+
+static struct mdio_device_id __maybe_unused qca8k_tbl[] = {
+ { QCA8K_PHY_ID_QCA8337, QCA8K_PHY_ID_MASK },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, qca8k_tbl);
+MODULE_DESCRIPTION("Qualcomm QCA8k PHY driver");
+MODULE_AUTHOR("Ansuel Smith");
+MODULE_LICENSE("GPL");
Add initial support for qca8k internal PHYs. The internal PHYs requires special mmd and debug values to be set based on the switch revision passwd using the dev_flags. Supports output of idle, receive and eee_wake errors stats. Some debug values sets can't be translated as the documentation lacks any reference about them. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- drivers/net/phy/Kconfig | 7 ++ drivers/net/phy/Makefile | 1 + drivers/net/phy/qca8k.c | 174 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 182 insertions(+) create mode 100644 drivers/net/phy/qca8k.c