| Message ID | 20210507213105.140138-1-marex@denx.de (mailing list archive) |
|---|---|
| State | Awaiting Upstream |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | rsi: Assign beacon rate settings to the correct rate_info descriptor field | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
Marek Vasut <marex@denx.de> wrote: > The RSI_RATE_x bits must be assigned to struct rsi_data_desc rate_info > field. The rest of the driver does it correctly, except this one place, > so fix it. This is also aligned with the RSI downstream vendor driver. > Without this patch, an AP operating at 5 GHz does not transmit any > beacons at all, this patch fixes that. > > Fixes: d26a9559403c ("rsi: add beacon changes for AP mode") > Signed-off-by: Marek Vasut <marex@denx.de> > Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> > Cc: Angus Ainslie <angus@akkea.ca> > Cc: David S. Miller <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Kalle Valo <kvalo@codeaurora.org> > Cc: Karun Eagalapati <karun256@gmail.com> > Cc: Martin Kepplinger <martink@posteo.de> > Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> > Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> > Cc: Siva Rebbagondla <siva8118@gmail.com> > Cc: netdev@vger.kernel.org > Cc: stable@vger.kernel.org Patch applied to wireless-drivers-next.git, thanks. b1c3a24897bd rsi: Assign beacon rate settings to the correct rate_info descriptor field
diff --git a/drivers/net/wireless/rsi/rsi_91x_hal.c b/drivers/net/wireless/rsi/rsi_91x_hal.c index ce9892152f4d..ab837921d9a4 100644 --- a/drivers/net/wireless/rsi/rsi_91x_hal.c +++ b/drivers/net/wireless/rsi/rsi_91x_hal.c @@ -470,9 +470,9 @@ int rsi_prepare_beacon(struct rsi_common *common, struct sk_buff *skb) } if (common->band == NL80211_BAND_2GHZ) - bcn_frm->bbp_info |= cpu_to_le16(RSI_RATE_1); + bcn_frm->rate_info |= cpu_to_le16(RSI_RATE_1); else - bcn_frm->bbp_info |= cpu_to_le16(RSI_RATE_6); + bcn_frm->rate_info |= cpu_to_le16(RSI_RATE_6); if (mac_bcn->data[tim_offset + 2] == 0) bcn_frm->frame_info |= cpu_to_le16(RSI_DATA_DESC_DTIM_BEACON);
The RSI_RATE_x bits must be assigned to struct rsi_data_desc rate_info field. The rest of the driver does it correctly, except this one place, so fix it. This is also aligned with the RSI downstream vendor driver. Without this patch, an AP operating at 5 GHz does not transmit any beacons at all, this patch fixes that. Fixes: d26a9559403c ("rsi: add beacon changes for AP mode") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Karun Eagalapati <karun256@gmail.com> Cc: Martin Kepplinger <martink@posteo.de> Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org --- drivers/net/wireless/rsi/rsi_91x_hal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)