diff mbox series

[net-next,3/3] net: mdio: ipq8064: enlarge sleep after read/write operation

Message ID 20210514210351.22240-3-ansuelsmth@gmail.com (mailing list archive)
State Accepted
Commit 77091933e453a258bbe9ff2aeb1c8d6fc1db7ef9
Delegated to: Netdev Maintainers
Headers show
Series [net-next,1/3] net: mdio: ipq8064: clean whitespaces in define | expand

Checks

Context Check Description
netdev/cover_letter warning Series does not have a cover letter
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 23 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Christian Marangi May 14, 2021, 9:03 p.m. UTC 
With the use of the qca8k dsa driver, some problem arised related to
port status detection. With a load on a specific port (for example a
simple speed test), the driver starts to behave in a strange way and
garbage data is produced. To address this, enlarge the sleep delay and
address a bug for the reg offset 31 that require additional delay for
this specific reg.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/mdio/mdio-ipq8064.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/mdio/mdio-ipq8064.c b/drivers/net/mdio/mdio-ipq8064.c
index 14b3c310af73..bd1aea2d5a26 100644
--- a/drivers/net/mdio/mdio-ipq8064.c
+++ b/drivers/net/mdio/mdio-ipq8064.c
@@ -65,7 +65,7 @@  ipq8064_mdio_read(struct mii_bus *bus, int phy_addr, int reg_offset)
 		   ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
 
 	regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
-	usleep_range(8, 10);
+	usleep_range(10, 13);
 
 	err = ipq8064_mdio_wait_busy(priv);
 	if (err)
@@ -91,7 +91,14 @@  ipq8064_mdio_write(struct mii_bus *bus, int phy_addr, int reg_offset, u16 data)
 		   ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
 
 	regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
-	usleep_range(8, 10);
+
+	/* For the specific reg 31 extra time is needed or the next
+	 * read will produce garbage data.
+	 */
+	if (reg_offset == 31)
+		usleep_range(30, 43);
+	else
+		usleep_range(10, 13);
 
 	return ipq8064_mdio_wait_busy(priv);
 }