@@ -30,6 +30,148 @@
#include <linux/netlink.h>
#include <net/Space.h>
+/*
+ * This structure holds boot-time configured netdevice settings. They
+ * are then used in the device probing.
+ */
+struct netdev_boot_setup {
+ char name[IFNAMSIZ];
+ struct ifmap map;
+};
+#define NETDEV_BOOT_SETUP_MAX 8
+
+
+/******************************************************************************
+ *
+ * Device Boot-time Settings Routines
+ *
+ ******************************************************************************/
+
+/* Boot time configuration table */
+static struct netdev_boot_setup dev_boot_setup[NETDEV_BOOT_SETUP_MAX];
+
+/**
+ * netdev_boot_setup_add - add new setup entry
+ * @name: name of the device
+ * @map: configured settings for the device
+ *
+ * Adds new setup entry to the dev_boot_setup list. The function
+ * returns 0 on error and 1 on success. This is a generic routine to
+ * all netdevices.
+ */
+static int netdev_boot_setup_add(char *name, struct ifmap *map)
+{
+ struct netdev_boot_setup *s;
+ int i;
+
+ s = dev_boot_setup;
+ for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
+ if (s[i].name[0] == '\0' || s[i].name[0] == ' ') {
+ memset(s[i].name, 0, sizeof(s[i].name));
+ strlcpy(s[i].name, name, IFNAMSIZ);
+ memcpy(&s[i].map, map, sizeof(s[i].map));
+ break;
+ }
+ }
+
+ return i >= NETDEV_BOOT_SETUP_MAX ? 0 : 1;
+}
+
+/**
+ * netdev_boot_setup_check - check boot time settings
+ * @dev: the netdevice
+ *
+ * Check boot time settings for the device.
+ * The found settings are set for the device to be used
+ * later in the device probing.
+ * Returns 0 if no settings found, 1 if they are.
+ */
+int netdev_boot_setup_check(struct net_device *dev)
+{
+ struct netdev_boot_setup *s = dev_boot_setup;
+ int i;
+
+ for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
+ if (s[i].name[0] != '\0' && s[i].name[0] != ' ' &&
+ !strcmp(dev->name, s[i].name)) {
+ dev->irq = s[i].map.irq;
+ dev->base_addr = s[i].map.base_addr;
+ dev->mem_start = s[i].map.mem_start;
+ dev->mem_end = s[i].map.mem_end;
+ return 1;
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL(netdev_boot_setup_check);
+
+/**
+ * netdev_boot_base - get address from boot time settings
+ * @prefix: prefix for network device
+ * @unit: id for network device
+ *
+ * Check boot time settings for the base address of device.
+ * The found settings are set for the device to be used
+ * later in the device probing.
+ * Returns 0 if no settings found.
+ */
+static unsigned long netdev_boot_base(const char *prefix, int unit)
+{
+ const struct netdev_boot_setup *s = dev_boot_setup;
+ char name[IFNAMSIZ];
+ int i;
+
+ sprintf(name, "%s%d", prefix, unit);
+
+ /*
+ * If device already registered then return base of 1
+ * to indicate not to probe for this interface
+ */
+ if (__dev_get_by_name(&init_net, name))
+ return 1;
+
+ for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++)
+ if (!strcmp(name, s[i].name))
+ return s[i].map.base_addr;
+ return 0;
+}
+
+/*
+ * Saves at boot time configured settings for any netdevice.
+ */
+static int __init netdev_boot_setup(char *str)
+{
+ int ints[5];
+ struct ifmap map;
+
+ str = get_options(str, ARRAY_SIZE(ints), ints);
+ if (!str || !*str)
+ return 0;
+
+ /* Save settings */
+ memset(&map, 0, sizeof(map));
+ if (ints[0] > 0)
+ map.irq = ints[1];
+ if (ints[0] > 1)
+ map.base_addr = ints[2];
+ if (ints[0] > 2)
+ map.mem_start = ints[3];
+ if (ints[0] > 3)
+ map.mem_end = ints[4];
+
+ /* Add new entry to the list */
+ return netdev_boot_setup_add(str, &map);
+}
+
+__setup("netdev=", netdev_boot_setup);
+
+static int __init ether_boot_setup(char *str)
+{
+ return netdev_boot_setup(str);
+}
+__setup("ether=", ether_boot_setup);
+
+
/* A unified ethernet device probe. This is the easiest way to have every
* ethernet adaptor have the name "eth[0123...]".
*/
@@ -295,18 +295,6 @@ enum netdev_state_t {
};
-/*
- * This structure holds boot-time configured netdevice settings. They
- * are then used in the device probing.
- */
-struct netdev_boot_setup {
- char name[IFNAMSIZ];
- struct ifmap map;
-};
-#define NETDEV_BOOT_SETUP_MAX 8
-
-int __init netdev_boot_setup(char *str);
-
struct gro_list {
struct list_head list;
int count;
@@ -2917,7 +2905,6 @@ static inline struct net_device *first_net_device_rcu(struct net *net)
}
int netdev_boot_setup_check(struct net_device *dev);
-unsigned long netdev_boot_base(const char *prefix, int unit);
struct net_device *dev_getbyhwaddr_rcu(struct net *net, unsigned short type,
const char *hwaddr);
struct net_device *dev_getfirstbyhwtype(struct net *net, unsigned short type);
@@ -674,131 +674,6 @@ void dev_remove_offload(struct packet_offload *po)
}
EXPORT_SYMBOL(dev_remove_offload);
-/******************************************************************************
- *
- * Device Boot-time Settings Routines
- *
- ******************************************************************************/
-
-/* Boot time configuration table */
-static struct netdev_boot_setup dev_boot_setup[NETDEV_BOOT_SETUP_MAX];
-
-/**
- * netdev_boot_setup_add - add new setup entry
- * @name: name of the device
- * @map: configured settings for the device
- *
- * Adds new setup entry to the dev_boot_setup list. The function
- * returns 0 on error and 1 on success. This is a generic routine to
- * all netdevices.
- */
-static int netdev_boot_setup_add(char *name, struct ifmap *map)
-{
- struct netdev_boot_setup *s;
- int i;
-
- s = dev_boot_setup;
- for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
- if (s[i].name[0] == '\0' || s[i].name[0] == ' ') {
- memset(s[i].name, 0, sizeof(s[i].name));
- strlcpy(s[i].name, name, IFNAMSIZ);
- memcpy(&s[i].map, map, sizeof(s[i].map));
- break;
- }
- }
-
- return i >= NETDEV_BOOT_SETUP_MAX ? 0 : 1;
-}
-
-/**
- * netdev_boot_setup_check - check boot time settings
- * @dev: the netdevice
- *
- * Check boot time settings for the device.
- * The found settings are set for the device to be used
- * later in the device probing.
- * Returns 0 if no settings found, 1 if they are.
- */
-int netdev_boot_setup_check(struct net_device *dev)
-{
- struct netdev_boot_setup *s = dev_boot_setup;
- int i;
-
- for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
- if (s[i].name[0] != '\0' && s[i].name[0] != ' ' &&
- !strcmp(dev->name, s[i].name)) {
- dev->irq = s[i].map.irq;
- dev->base_addr = s[i].map.base_addr;
- dev->mem_start = s[i].map.mem_start;
- dev->mem_end = s[i].map.mem_end;
- return 1;
- }
- }
- return 0;
-}
-EXPORT_SYMBOL(netdev_boot_setup_check);
-
-
-/**
- * netdev_boot_base - get address from boot time settings
- * @prefix: prefix for network device
- * @unit: id for network device
- *
- * Check boot time settings for the base address of device.
- * The found settings are set for the device to be used
- * later in the device probing.
- * Returns 0 if no settings found.
- */
-unsigned long netdev_boot_base(const char *prefix, int unit)
-{
- const struct netdev_boot_setup *s = dev_boot_setup;
- char name[IFNAMSIZ];
- int i;
-
- sprintf(name, "%s%d", prefix, unit);
-
- /*
- * If device already registered then return base of 1
- * to indicate not to probe for this interface
- */
- if (__dev_get_by_name(&init_net, name))
- return 1;
-
- for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++)
- if (!strcmp(name, s[i].name))
- return s[i].map.base_addr;
- return 0;
-}
-
-/*
- * Saves at boot time configured settings for any netdevice.
- */
-int __init netdev_boot_setup(char *str)
-{
- int ints[5];
- struct ifmap map;
-
- str = get_options(str, ARRAY_SIZE(ints), ints);
- if (!str || !*str)
- return 0;
-
- /* Save settings */
- memset(&map, 0, sizeof(map));
- if (ints[0] > 0)
- map.irq = ints[1];
- if (ints[0] > 1)
- map.base_addr = ints[2];
- if (ints[0] > 2)
- map.mem_start = ints[3];
- if (ints[0] > 3)
- map.mem_end = ints[4];
-
- /* Add new entry to the list */
- return netdev_boot_setup_add(str, &map);
-}
-
-__setup("netdev=", netdev_boot_setup);
-
/*******************************************************************************
*
* Device Interface Subroutines
@@ -62,8 +62,6 @@
#include <linux/uaccess.h>
#include <net/pkt_sched.h>
-__setup("ether=", netdev_boot_setup);
-
/**
* eth_header - create the Ethernet header
* @skb: buffer to alter