diff mbox series

[net-next,v2,3/4] dt-bindings: net: dsa: add MT7530 interrupt controller binding

Message ID 20210519033202.3245667-4-dqfext@gmail.com (mailing list archive)
State Accepted
Commit 4006f986c091cda1a66067f77b6f5704a9618562
Delegated to: Netdev Maintainers
Headers show
Series MT7530 interrupt support | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 1 maintainers not CCed: linux-arm-kernel@lists.infradead.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 12 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Qingfang Deng May 19, 2021, 3:32 a.m. UTC 
Add device tree binding to support MT7530 interrupt controller.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
v1 -> v2:
Fixed plural (property -> properties)

 Documentation/devicetree/bindings/net/dsa/mt7530.txt | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index de04626a8e9d..18247ebfc487 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -81,6 +81,12 @@  Optional properties:
 - gpio-controller: Boolean; if defined, MT7530's LED controller will run on
 	GPIO mode.
 - #gpio-cells: Must be 2 if gpio-controller is defined.
+- interrupt-controller: Boolean; Enables the internal interrupt controller.
+
+If interrupt-controller is defined, the following properties are required.
+
+- #interrupt-cells: Must be 1.
+- interrupts: Parent interrupt for the interrupt controller.
 
 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required, optional properties and how the integrated switch subnodes must