diff mbox series

[RFC,net-next,2/4] net: marvell: prestera: disable events interrupt while handling

Message ID 20210519143321.849-3-vadym.kochan@plvision.eu (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Marvell Prestera Switchdev initial updates for firmware version 3.0 | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 5 of 5 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 49 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Vadym Kochan May 19, 2021, 2:33 p.m. UTC 
From: Vadym Kochan <vkochan@marvell.com>

There are change in firmware which requires that receiver will
disable event interrupts before handling them and enable them
after finish with handling. Events still may come into the queue
but without receiver interruption.

Signed-off-by: Vadym Kochan <vkochan@marvell.com>
---
 .../ethernet/marvell/prestera/prestera_pci.c  | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/marvell/prestera/prestera_pci.c b/drivers/net/ethernet/marvell/prestera/prestera_pci.c
index d384dcacd579..7ac045e82fab 100644
--- a/drivers/net/ethernet/marvell/prestera/prestera_pci.c
+++ b/drivers/net/ethernet/marvell/prestera/prestera_pci.c
@@ -1,6 +1,7 @@ 
 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
 /* Copyright (c) 2019-2020 Marvell International Ltd. All rights reserved */
 
+#include <linux/bitfield.h>
 #include <linux/circ_buf.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
@@ -144,6 +145,11 @@  struct prestera_fw_regs {
 /* PRESTERA_CMD_RCV_CTL_REG flags */
 #define PRESTERA_CMD_F_REPL_SENT	BIT(0)
 
+#define PRESTERA_FW_EVT_CTL_STATUS_MASK	GENMASK(1, 0)
+
+#define PRESTERA_FW_EVT_CTL_STATUS_ON	0
+#define PRESTERA_FW_EVT_CTL_STATUS_OFF	1
+
 #define PRESTERA_EVTQ_REG_OFFSET(q, f)			\
 	(PRESTERA_FW_REG_OFFSET(evtq_list) +		\
 	 (q) * sizeof(struct prestera_fw_evtq_regs) +	\
@@ -262,6 +268,15 @@  static u8 prestera_fw_evtq_pick(struct prestera_fw *fw)
 	return PRESTERA_EVT_QNUM_MAX;
 }
 
+static void prestera_fw_evt_ctl_status_set(struct prestera_fw *fw, u32 val)
+{
+	u32 status = prestera_fw_read(fw, PRESTERA_FW_STATUS_REG);
+
+	u32p_replace_bits(&status, val, PRESTERA_FW_EVT_CTL_STATUS_MASK);
+
+	prestera_fw_write(fw, PRESTERA_FW_STATUS_REG, status);
+}
+
 static void prestera_fw_evt_work_fn(struct work_struct *work)
 {
 	struct prestera_fw *fw;
@@ -271,6 +286,8 @@  static void prestera_fw_evt_work_fn(struct work_struct *work)
 	fw = container_of(work, struct prestera_fw, evt_work);
 	msg = fw->evt_msg;
 
+	prestera_fw_evt_ctl_status_set(fw, PRESTERA_FW_EVT_CTL_STATUS_OFF);
+
 	while ((qid = prestera_fw_evtq_pick(fw)) < PRESTERA_EVT_QNUM_MAX) {
 		u32 idx;
 		u32 len;
@@ -290,6 +307,8 @@  static void prestera_fw_evt_work_fn(struct work_struct *work)
 		if (fw->dev.recv_msg)
 			fw->dev.recv_msg(&fw->dev, msg, len);
 	}
+
+	prestera_fw_evt_ctl_status_set(fw, PRESTERA_FW_EVT_CTL_STATUS_ON);
 }
 
 static int prestera_fw_wait_reg32(struct prestera_fw *fw, u32 reg, u32 cmp,