diff mbox series

[net,3/6] net: dsa: sja1105: add error handling in sja1105_setup()

Message ID 20210524092527.874479-4-olteanv@gmail.com (mailing list archive)
State Accepted
Commit cec279a898a3b004411682f212215ccaea1cd0fb
Delegated to: Netdev Maintainers
Headers show
Series Fixes for SJA1105 DSA driver | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net
netdev/subject_prefix success Link
netdev/cc_maintainers fail 1 blamed authors not CCed: georg.waibel@sensor-technik.de; 1 maintainers not CCed: georg.waibel@sensor-technik.de
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 40 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Vladimir Oltean May 24, 2021, 9:25 a.m. UTC 
From: Vladimir Oltean <vladimir.oltean@nxp.com>

If any of sja1105_static_config_load(), sja1105_clocking_setup() or
sja1105_devlink_setup() fails, we can't just return in the middle of
sja1105_setup() or memory will leak. Add a cleanup path.

Fixes: 0a7bdbc23d8a ("net: dsa: sja1105: move devlink param code to sja1105_devlink.c")
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/dsa/sja1105/sja1105_main.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 2248152b4836..c7a1be8bbddf 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -2976,13 +2976,13 @@  static int sja1105_setup(struct dsa_switch *ds)
 	rc = sja1105_static_config_load(priv, ports);
 	if (rc < 0) {
 		dev_err(ds->dev, "Failed to load static config: %d\n", rc);
-		return rc;
+		goto out_ptp_clock_unregister;
 	}
 	/* Configure the CGU (PHY link modes and speeds) */
 	rc = sja1105_clocking_setup(priv);
 	if (rc < 0) {
 		dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc);
-		return rc;
+		goto out_static_config_free;
 	}
 	/* On SJA1105, VLAN filtering per se is always enabled in hardware.
 	 * The only thing we can do to disable it is lie about what the 802.1Q
@@ -3003,7 +3003,7 @@  static int sja1105_setup(struct dsa_switch *ds)
 
 	rc = sja1105_devlink_setup(ds);
 	if (rc < 0)
-		return rc;
+		goto out_static_config_free;
 
 	/* The DSA/switchdev model brings up switch ports in standalone mode by
 	 * default, and that means vlan_filtering is 0 since they're not under
@@ -3012,6 +3012,17 @@  static int sja1105_setup(struct dsa_switch *ds)
 	rtnl_lock();
 	rc = sja1105_setup_8021q_tagging(ds, true);
 	rtnl_unlock();
+	if (rc)
+		goto out_devlink_teardown;
+
+	return 0;
+
+out_devlink_teardown:
+	sja1105_devlink_teardown(ds);
+out_ptp_clock_unregister:
+	sja1105_ptp_clock_unregister(ds);
+out_static_config_free:
+	sja1105_static_config_free(&priv->static_config);
 
 	return rc;
 }