diff mbox series

[net] ixgbe: Fix packet corruption due to missing DMA sync

Message ID 20210524220531.64640-1-markubo@amazon.com (mailing list archive)
State Awaiting Upstream
Delegated to: Netdev Maintainers
Headers show
Series [net] ixgbe: Fix packet corruption due to missing DMA sync | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 1 this patch: 1
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: line length of 82 exceeds 80 columns
netdev/build_allmodconfig_warn success Errors and warnings before: 1 this patch: 1
netdev/header_inline success Link

Commit Message

Markus Boehme May 24, 2021, 10:05 p.m. UTC
When receiving a packet with multiple fragments, hardware may still
touch the first fragment until the entire packet has been received. The
driver therefore keeps the first fragment mapped for DMA until end of
packet has been asserted, and delays its dma_sync call until then.

The driver tries to fit multiple receive buffers on one page. When using
3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned
off/build_skb is being used) on an architecture with 4K pages, the
driver allocates an order 1 compound page and uses one page per receive
buffer. To determine the correct offset for a delayed DMA sync of the
first fragment of a multi-fragment packet, the driver then cannot just
use PAGE_MASK on the DMA address but has to construct a mask based on
the actual size of the backing page.

Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration
will always sync the first page of a compound page. With the SWIOTLB
enabled this can lead to corrupted packets (zeroed out first fragment,
re-used garbage from another packet) and various consequences, such as
slow/stalling data transfers and connection resets. For example, testing
on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled
(e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle
out without this patch.

Cc: stable@vger.kernel.org
Fixes: 0c5661ecc5dd7 ("ixgbe: fix crash in build_skb Rx code path")
Signed-off-by: Markus Boehme <markubo@amazon.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index c5ec17d19c59..507ef3471301 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1825,7 +1825,8 @@  static void ixgbe_dma_sync_frag(struct ixgbe_ring *rx_ring,
 				struct sk_buff *skb)
 {
 	if (ring_uses_build_skb(rx_ring)) {
-		unsigned long offset = (unsigned long)(skb->data) & ~PAGE_MASK;
+		unsigned long mask = (unsigned long)ixgbe_rx_pg_size(rx_ring) - 1;
+		unsigned long offset = (unsigned long)(skb->data) & mask;
 
 		dma_sync_single_range_for_cpu(rx_ring->dev,
 					      IXGBE_CB(skb)->dma,