@@ -56,6 +56,14 @@ config ARM_PMU
Say y if you want to use CPU performance monitors on ARM-based
systems.
+config RISCV_PMU
+ depends on RISCV
+ bool "RISC-V PMU framework"
+ default y
+ help
+ Say y if you want to use CPU performance monitors on RISCV-based
+ systems.
+
config ARM_PMU_ACPI
depends on ARM_PMU && ACPI
def_bool y
@@ -10,6 +10,7 @@ obj-$(CONFIG_FSL_IMX8_DDR_PMU) += fsl_imx8_ddr_perf.o
obj-$(CONFIG_HISI_PMU) += hisilicon/
obj-$(CONFIG_QCOM_L2_PMU) += qcom_l2_pmu.o
obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
+obj-$(CONFIG_RISCV_PMU) += riscv_pmu.o
obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
new file mode 100644
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RISC-V performance counter support.
+ *
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ *
+ * This implementation is based on old RISC-V perf and ARM perf event code
+ * which are in turn based on sparc64 and x86 code.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <linux/perf/riscv_pmu.h>
+#include <linux/printk.h>
+#include <linux/smp.h>
+
+static unsigned long csr_read_num(int csr_num)
+{
+#define switchcase_csr_read(__csr_num, __val) {\
+ case __csr_num: \
+ __val = csr_read(__csr_num); \
+ break; }
+#define switchcase_csr_read_2(__csr_num, __val) {\
+ switchcase_csr_read(__csr_num + 0, __val) \
+ switchcase_csr_read(__csr_num + 1, __val)}
+#define switchcase_csr_read_4(__csr_num, __val) {\
+ switchcase_csr_read_2(__csr_num + 0, __val) \
+ switchcase_csr_read_2(__csr_num + 2, __val)}
+#define switchcase_csr_read_8(__csr_num, __val) {\
+ switchcase_csr_read_4(__csr_num + 0, __val) \
+ switchcase_csr_read_4(__csr_num + 4, __val)}
+#define switchcase_csr_read_16(__csr_num, __val) {\
+ switchcase_csr_read_8(__csr_num + 0, __val) \
+ switchcase_csr_read_8(__csr_num + 8, __val)}
+#define switchcase_csr_read_32(__csr_num, __val) {\
+ switchcase_csr_read_16(__csr_num + 0, __val) \
+ switchcase_csr_read_16(__csr_num + 16, __val)}
+
+ unsigned long ret = 0;
+
+ switch (csr_num) {
+ switchcase_csr_read_32(CSR_CYCLE, ret)
+ switchcase_csr_read_32(CSR_CYCLEH, ret)
+ default :
+ break;
+ }
+
+ return ret;
+#undef switchcase_csr_read_32
+#undef switchcase_csr_read_16
+#undef switchcase_csr_read_8
+#undef switchcase_csr_read_4
+#undef switchcase_csr_read_2
+#undef switchcase_csr_read
+}
+
+/*
+ * Read the CSR of a corresponding counter.
+ */
+unsigned long riscv_pmu_ctr_read_csr(unsigned long csr)
+{
+ if (csr < CSR_CYCLE || csr > CSR_HPMCOUNTER31H ||
+ (csr > CSR_HPMCOUNTER31 && csr < CSR_CYCLEH)) {
+ pr_err("Invalid performance counter csr %lx\n", csr);
+ return -EINVAL;
+ }
+
+ return csr_read_num(csr);
+}
+
+static unsigned long riscv_pmu_ctr_get_mask(struct perf_event *event)
+{
+ int cwidth;
+ struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (!rvpmu->ctr_get_width)
+ /**
+ * If the pmu driver doesn't support counter width, set it to default maximum
+ * allowed by the specification.
+ */
+ cwidth = 63;
+ else {
+ if (hwc->idx == -1)
+ /* Handle init case where idx is not initialized yet */
+ cwidth = rvpmu->ctr_get_width(0);
+ else
+ cwidth = rvpmu->ctr_get_width(hwc->idx);
+ }
+
+ return GENMASK_ULL(cwidth, 0);
+}
+
+static u64 riscv_pmu_event_update(struct perf_event *event)
+{
+ struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ u64 prev_raw_count, new_raw_count;
+ unsigned long cmask;
+ u64 oldval, delta;
+
+ if (!rvpmu->ctr_read)
+ return 0;
+
+ cmask = riscv_pmu_ctr_get_mask(event);
+
+ do {
+ prev_raw_count = local64_read(&hwc->prev_count);
+ new_raw_count = rvpmu->ctr_read(event);
+ oldval = local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count);
+ } while (oldval != prev_raw_count);
+
+ delta = (new_raw_count - prev_raw_count) & cmask;
+ local64_add(delta, &event->count);
+ local64_sub(delta, &hwc->period_left);
+
+ return delta;
+}
+
+static void riscv_pmu_stop(struct perf_event *event, int flags)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+
+ WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
+
+ if (!(hwc->state & PERF_HES_STOPPED)) {
+ riscv_pmu_event_update(event);
+ if (rvpmu->ctr_stop) {
+ rvpmu->ctr_stop(event);
+ hwc->state |= PERF_HES_STOPPED;
+ }
+ hwc->state |= PERF_HES_UPTODATE;
+ }
+}
+
+static int riscv_pmu_event_set_period(struct perf_event *event, u64 *init_val)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ s64 left = local64_read(&hwc->period_left);
+ s64 period = hwc->sample_period;
+ u64 max_period;
+ int ret = 0;
+ unsigned long cmask = riscv_pmu_ctr_get_mask(event);
+
+ max_period = cmask;
+ if (unlikely(left <= -period)) {
+ left = period;
+ local64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ ret = 1;
+ }
+
+ if (unlikely(left <= 0)) {
+ left += period;
+ local64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ ret = 1;
+ }
+
+ /*
+ * Limit the maximum period to prevent the counter value
+ * from overtaking the one we are about to program. In
+ * effect we are reducing max_period to account for
+ * interrupt latency (and we are being very conservative).
+ */
+ if (left > (max_period >> 1))
+ left = (max_period >> 1);
+
+ local64_set(&hwc->prev_count, (u64)-left);
+ *init_val = (u64)(-left) & max_period;
+ perf_event_update_userpage(event);
+
+ return ret;
+}
+
+static void riscv_pmu_start(struct perf_event *event, int flags)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+ u64 init_val;
+
+ if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
+ return;
+
+ if (flags & PERF_EF_RELOAD) {
+ WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
+
+ /*
+ * Set the counter to the period to the next interrupt here,
+ * if you have any.
+ */
+ }
+
+ hwc->state = 0;
+ riscv_pmu_event_set_period(event, &init_val);
+ rvpmu->ctr_start(event, init_val);
+ perf_event_update_userpage(event);
+}
+
+static int riscv_pmu_add(struct perf_event *event, int flags)
+{
+ struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx;
+
+ idx = rvpmu->ctr_get_idx(event);
+ if (idx < 0)
+ return idx;
+
+ hwc->idx = idx;
+ cpuc->events[idx] = event;
+ cpuc->n_events++;
+ hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+ if (flags & PERF_EF_START)
+ riscv_pmu_start(event, PERF_EF_RELOAD);
+
+ /* Propagate our changes to the userspace mapping. */
+ perf_event_update_userpage(event);
+
+ return 0;
+}
+
+static void riscv_pmu_del(struct perf_event *event, int flags)
+{
+ struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+
+ cpuc->events[hwc->idx] = NULL;
+ riscv_pmu_stop(event, PERF_EF_UPDATE);
+ cpuc->n_events--;
+ if (rvpmu->ctr_clear_idx)
+ rvpmu->ctr_clear_idx(event);
+ perf_event_update_userpage(event);
+ hwc->idx = -1;
+}
+
+static void riscv_pmu_read(struct perf_event *event)
+{
+ riscv_pmu_event_update(event);
+}
+
+static int riscv_pmu_event_init(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+ int mapped_event;
+ u64 event_config = 0;
+ unsigned long cmask;
+
+ hwc->flags = 0;
+ mapped_event = rvpmu->event_map(event, &event_config);
+ if (mapped_event < 0) {
+ pr_debug("event %x:%llx not supported\n", event->attr.type,
+ event->attr.config);
+ return mapped_event;
+ }
+
+ /*
+ * idx is set to -1 because the index of a general event should not be
+ * decided until binding to some counter in pmu->add().
+ * config will contain the information about counter CSR
+ * the idx will contain the counter index
+ */
+ hwc->config = event_config;
+ hwc->idx = -1;
+ hwc->event_base = mapped_event;
+
+ if (!is_sampling_event(event)) {
+ /*
+ * For non-sampling runs, limit the sample_period to half
+ * of the counter width. That way, the new counter value
+ * is far less likely to overtake the previous one unless
+ * you have some serious IRQ latency issues.
+ */
+ cmask = riscv_pmu_ctr_get_mask(event);
+ hwc->sample_period = cmask >> 1;
+ hwc->last_period = hwc->sample_period;
+ local64_set(&hwc->period_left, hwc->sample_period);
+ }
+
+ return 0;
+}
+
+struct riscv_pmu *riscv_pmu_alloc(void)
+{
+ struct riscv_pmu *pmu;
+ int cpuid, i;
+ struct cpu_hw_events *cpuc;
+
+ pmu = kzalloc(sizeof(*pmu), GFP_KERNEL);
+ if (!pmu)
+ goto out;
+
+ pmu->hw_events = alloc_percpu_gfp(struct cpu_hw_events, GFP_KERNEL);
+ if (!pmu->hw_events) {
+ pr_info("failed to allocate per-cpu PMU data.\n");
+ goto out_free_pmu;
+ }
+
+ for_each_possible_cpu(cpuid) {
+ cpuc = per_cpu_ptr(pmu->hw_events, cpuid);
+ cpuc->n_events = 0;
+ for (i = 0; i < RISCV_MAX_COUNTERS; i++)
+ cpuc->events[i] = NULL;
+ }
+ pmu->pmu = (struct pmu) {
+ .event_init = riscv_pmu_event_init,
+ .add = riscv_pmu_add,
+ .del = riscv_pmu_del,
+ .start = riscv_pmu_start,
+ .stop = riscv_pmu_stop,
+ .read = riscv_pmu_read,
+ };
+
+ return pmu;
+
+out_free_pmu:
+ kfree(pmu);
+out:
+ return NULL;
+}
@@ -121,6 +121,7 @@ enum cpuhp_state {
CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING,
CPUHP_AP_PERF_ARM_ACPI_STARTING,
CPUHP_AP_PERF_ARM_STARTING,
+ CPUHP_AP_PERF_RISCV_STARTING,
CPUHP_AP_ARM_L2X0_STARTING,
CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
CPUHP_AP_ARM_ARCH_TIMER_STARTING,
new file mode 100644
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 SiFive
+ * Copyright (C) 2018 Andes Technology Corporation
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ *
+ */
+
+#ifndef _ASM_RISCV_PERF_EVENT_H
+#define _ASM_RISCV_PERF_EVENT_H
+
+#include <linux/perf_event.h>
+#include <linux/ptrace.h>
+#include <linux/interrupt.h>
+
+#ifdef CONFIG_RISCV_PMU
+
+/*
+ * The RISCV_MAX_COUNTERS parameter should be specified.
+ */
+
+#define RISCV_MAX_COUNTERS 128
+#define RISCV_OP_UNSUPP (-EOPNOTSUPP)
+#define RISCV_PMU_PDEV_NAME "riscv-pmu"
+
+struct cpu_hw_events {
+ /* currently enabled events */
+ int n_events;
+ /* currently enabled events */
+ struct perf_event *events[RISCV_MAX_COUNTERS];
+ /* currently enabled counters */
+ DECLARE_BITMAP(used_event_ctrs, RISCV_MAX_COUNTERS);
+};
+
+struct riscv_pmu {
+ struct pmu pmu;
+ char *name;
+
+ irqreturn_t (*handle_irq)(int irq_num, void *dev);
+ int irq;
+
+ int num_counters;
+ u64 (*ctr_read)(struct perf_event *event);
+ int (*ctr_get_idx)(struct perf_event *event);
+ int (*ctr_get_width)(int idx);
+ void (*ctr_clear_idx)(struct perf_event *event);
+ void (*ctr_start)(struct perf_event *event, u64 init_val);
+ void (*ctr_stop)(struct perf_event *event);
+ int (*event_map)(struct perf_event *event, u64 *config);
+
+ struct cpu_hw_events __percpu *hw_events;
+};
+
+#define to_riscv_pmu(p) (container_of(p, struct riscv_pmu, pmu))
+unsigned long riscv_pmu_ctr_read_csr(unsigned long csr);
+struct riscv_pmu *riscv_pmu_alloc(void);
+
+#endif /* CONFIG_RISCV_PMU */
+
+#endif /* _ASM_RISCV_PERF_EVENT_H */
Implement a perf core library that can support all the essential perf features in future. It can also accommodate any type of PMU implementation in future. Currently, both SBI based perf driver and legacy driver implemented uses the library. Most of the common perf functionalities are kept in this core library wile PMU specific driver can implement PMU specific features. For example, the SBI specific functionality will be implemented in the SBI specific driver. Signed-off-by: Atish Patra <atish.patra@wdc.com> --- drivers/perf/Kconfig | 8 + drivers/perf/Makefile | 1 + drivers/perf/riscv_pmu.c | 326 +++++++++++++++++++++++++++++++++ include/linux/cpuhotplug.h | 1 + include/linux/perf/riscv_pmu.h | 60 ++++++ 5 files changed, 396 insertions(+) create mode 100644 drivers/perf/riscv_pmu.c create mode 100644 include/linux/perf/riscv_pmu.h