diff mbox series

[v3,net-next,4/8] net: dsa: sja1105: cache the phy-mode port property

Message ID 20210530225939.772553-5-olteanv@gmail.com (mailing list archive)
State Accepted
Commit bf4edf4afb87e67bed8678c09a01110148830483
Delegated to: Netdev Maintainers
Headers show
Series Part 2 of SJA1105 DSA driver preparation for new switch introduction (SJA1110) | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 43 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Vladimir Oltean May 30, 2021, 10:59 p.m. UTC 
From: Vladimir Oltean <vladimir.oltean@nxp.com>

So far we've succeeded in operating without keeping a copy of the
phy-mode in the driver, since we already have the static config and we
can look at the xMII Mode Parameters Table which already holds that
information.

But with the SJA1110, we cannot make the distinction between sgmii and
2500base-x, because to the hardware's static config, it's all SGMII.
So add a phy_mode property per port inside struct sja1105_private.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
Changes in v3:
None.

Changes in v2:
None.

 drivers/net/dsa/sja1105/sja1105.h      |  1 +
 drivers/net/dsa/sja1105/sja1105_main.c | 24 +++---------------------
 2 files changed, 4 insertions(+), 21 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h
index 830ea5ca359f..d5c0217b1f65 100644
--- a/drivers/net/dsa/sja1105/sja1105.h
+++ b/drivers/net/dsa/sja1105/sja1105.h
@@ -210,6 +210,7 @@  struct sja1105_private {
 	struct sja1105_static_config static_config;
 	bool rgmii_rx_delay[SJA1105_MAX_NUM_PORTS];
 	bool rgmii_tx_delay[SJA1105_MAX_NUM_PORTS];
+	phy_interface_t phy_mode[SJA1105_MAX_NUM_PORTS];
 	bool best_effort_vlan_filtering;
 	unsigned long learn_ena;
 	unsigned long ucast_egress_floods;
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index c8d93d810421..e4932243d0d3 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -871,6 +871,8 @@  static int sja1105_parse_ports_node(struct sja1105_private *priv,
 			ports[index].role = XMII_MAC;
 		else if (of_property_read_bool(child, "sja1105,role-phy"))
 			ports[index].role = XMII_PHY;
+
+		priv->phy_mode[index] = phy_mode;
 	}
 
 	return 0;
@@ -1081,27 +1083,7 @@  static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
 static bool sja1105_phy_mode_mismatch(struct sja1105_private *priv, int port,
 				      phy_interface_t interface)
 {
-	struct sja1105_xmii_params_entry *mii;
-	sja1105_phy_interface_t phy_mode;
-
-	mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries;
-	phy_mode = mii->xmii_mode[port];
-
-	switch (interface) {
-	case PHY_INTERFACE_MODE_MII:
-		return (phy_mode != XMII_MODE_MII);
-	case PHY_INTERFACE_MODE_RMII:
-		return (phy_mode != XMII_MODE_RMII);
-	case PHY_INTERFACE_MODE_RGMII:
-	case PHY_INTERFACE_MODE_RGMII_ID:
-	case PHY_INTERFACE_MODE_RGMII_RXID:
-	case PHY_INTERFACE_MODE_RGMII_TXID:
-		return (phy_mode != XMII_MODE_RGMII);
-	case PHY_INTERFACE_MODE_SGMII:
-		return (phy_mode != XMII_MODE_SGMII);
-	default:
-		return true;
-	}
+	return priv->phy_mode[port] != interface;
 }
 
 static void sja1105_mac_config(struct dsa_switch *ds, int port,