| Message ID | 20210602170156.41643-1-lijunp213@gmail.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net-next] net: ibm: replenish rx pool and poll less frequently | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | success | Link |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Clearly marked for net-next |
| netdev/subject_prefix | success | Link |
| netdev/cc_maintainers | fail | 9 maintainers not CCed: tlfalcon@linux.ibm.com drt@linux.ibm.com paulus@samba.org benh@kernel.crashing.org sukadev@linux.ibm.com linuxppc-dev@lists.ozlabs.org mpe@ellerman.id.au davem@davemloft.net kuba@kernel.org |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
| netdev/kdoc | success | Errors and warnings before: 3 this patch: 3 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 30 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
| netdev/header_inline | success | Link |
On 6/2/21 10:01 AM, Lijun Pan wrote: > The old mechanism replenishes rx pool even only one frames is processed in > the poll function, which causes lots of overheads. The old mechanism > restarts polling until processed frames reaches the budget, which can > cause the poll function to loop into restart_poll 63 times at most and to > call replenish_rx_poll 63 times at most. Presumably this frequency is to keep ahead of demand. When you say lots of overhead - can you attach a number to that? How much does this change improve on that number (what workload benefits?)
On 2021-06-02 10:01, Lijun Pan wrote: > The old mechanism replenishes rx pool even only one frames is processed > in > the poll function, which causes lots of overheads. The old mechanism > restarts polling until processed frames reaches the budget, which can > cause the poll function to loop into restart_poll 63 times at most and > to > call replenish_rx_poll 63 times at most. This will cause soft lockup > very > easily. So, don't replenish too often, and don't goto restart_poll in > each > poll function. If there are pending descriptors, fetch them in the next > poll instance. Does this improve performance? > > Signed-off-by: Lijun Pan <lijunp213@gmail.com> > --- > drivers/net/ethernet/ibm/ibmvnic.c | 15 +++------------ > 1 file changed, 3 insertions(+), 12 deletions(-) > > diff --git a/drivers/net/ethernet/ibm/ibmvnic.c > b/drivers/net/ethernet/ibm/ibmvnic.c > index ffb2a91750c7..fae1eaa39dd0 100644 > --- a/drivers/net/ethernet/ibm/ibmvnic.c > +++ b/drivers/net/ethernet/ibm/ibmvnic.c > @@ -2435,7 +2435,6 @@ static int ibmvnic_poll(struct napi_struct > *napi, int budget) > frames_processed = 0; > rx_scrq = adapter->rx_scrq[scrq_num]; > > -restart_poll: > while (frames_processed < budget) { > struct sk_buff *skb; > struct ibmvnic_rx_buff *rx_buff; > @@ -2512,20 +2511,12 @@ static int ibmvnic_poll(struct napi_struct > *napi, int budget) > } > > if (adapter->state != VNIC_CLOSING && > - ((atomic_read(&adapter->rx_pool[scrq_num].available) < > - adapter->req_rx_add_entries_per_subcrq / 2) || > - frames_processed < budget)) There is a budget that the driver should adhere to. Even one frame, it should still process the frame within a budget. > + (atomic_read(&adapter->rx_pool[scrq_num].available) < > + adapter->req_rx_add_entries_per_subcrq / 2)) > replenish_rx_pool(adapter, &adapter->rx_pool[scrq_num]); > if (frames_processed < budget) { > - if (napi_complete_done(napi, frames_processed)) { > + if (napi_complete_done(napi, frames_processed)) > enable_scrq_irq(adapter, rx_scrq); > - if (pending_scrq(adapter, rx_scrq)) { > - if (napi_reschedule(napi)) { > - disable_scrq_irq(adapter, rx_scrq); > - goto restart_poll; > - } > - } > - } > } > return frames_processed; > }
On 2021-06-02 10:58, Dany Madden wrote: > On 2021-06-02 10:01, Lijun Pan wrote: >> The old mechanism replenishes rx pool even only one frames is >> processed in >> the poll function, which causes lots of overheads. The old mechanism >> restarts polling until processed frames reaches the budget, which can >> cause the poll function to loop into restart_poll 63 times at most and >> to >> call replenish_rx_poll 63 times at most. This will cause soft lockup >> very >> easily. So, don't replenish too often, and don't goto restart_poll in >> each >> poll function. If there are pending descriptors, fetch them in the >> next >> poll instance. > > Does this improve performance? > >> >> Signed-off-by: Lijun Pan <lijunp213@gmail.com> >> --- >> drivers/net/ethernet/ibm/ibmvnic.c | 15 +++------------ >> 1 file changed, 3 insertions(+), 12 deletions(-) >> >> diff --git a/drivers/net/ethernet/ibm/ibmvnic.c >> b/drivers/net/ethernet/ibm/ibmvnic.c >> index ffb2a91750c7..fae1eaa39dd0 100644 >> --- a/drivers/net/ethernet/ibm/ibmvnic.c >> +++ b/drivers/net/ethernet/ibm/ibmvnic.c >> @@ -2435,7 +2435,6 @@ static int ibmvnic_poll(struct napi_struct >> *napi, int budget) >> frames_processed = 0; >> rx_scrq = adapter->rx_scrq[scrq_num]; >> >> -restart_poll: >> while (frames_processed < budget) { >> struct sk_buff *skb; >> struct ibmvnic_rx_buff *rx_buff; >> @@ -2512,20 +2511,12 @@ static int ibmvnic_poll(struct napi_struct >> *napi, int budget) >> } >> >> if (adapter->state != VNIC_CLOSING && >> - ((atomic_read(&adapter->rx_pool[scrq_num].available) < >> - adapter->req_rx_add_entries_per_subcrq / 2) || >> - frames_processed < budget)) > > There is a budget that the driver should adhere to. Even one frame, it > should still process the frame within a budget. I meant it should replenish the buffer because the commit that added this check, https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=41ed0a00ffcd903ece4304a4a65d95706115ffcb, stated that low frame_processed means low incoming packets, so use the time to refill the buffers. So, it would be good to see some numbers of how this change is doing in comparison to the code before. > >> + (atomic_read(&adapter->rx_pool[scrq_num].available) < >> + adapter->req_rx_add_entries_per_subcrq / 2)) >> replenish_rx_pool(adapter, &adapter->rx_pool[scrq_num]); >> if (frames_processed < budget) { >> - if (napi_complete_done(napi, frames_processed)) { >> + if (napi_complete_done(napi, frames_processed)) >> enable_scrq_irq(adapter, rx_scrq); >> - if (pending_scrq(adapter, rx_scrq)) { >> - if (napi_reschedule(napi)) { >> - disable_scrq_irq(adapter, rx_scrq); >> - goto restart_poll; >> - } >> - } >> - } >> } >> return frames_processed; >> }
Lijun Pan [lijunp213@gmail.com] wrote: > The old mechanism replenishes rx pool even only one frames is processed in > the poll function, which causes lots of overheads. The old mechanism The soft lockup is not seen when replenishing a small number of buffers at a time. Its only under some conditions when replenishing a _large_ number at once - appears to be because the netdev_alloc_skb() calls collectively take a long time. Replenishing a small number at a time is not a problem. > restarts polling until processed frames reaches the budget, which can > cause the poll function to loop into restart_poll 63 times at most and to > call replenish_rx_poll 63 times at most. This will cause soft lockup very > easily. So, don't replenish too often, and don't goto restart_poll in each The 64 is from the budget the system gave us. And for us to hit the goto restart_loop: a. pending_scrq() in the while loop must not have a found a packet, and b. by the time we replenished the pool, completed napi etc we must have found a packet For this to happen 64 times, we must find - exactly zero packets in a. and - exactly one packet in b, and - the tight sequence must occur 64 times. IOW its more theoretical right? Even if it did happen a handful of times, the only "overheads" in the replenish are the netdev_alloc_skb() and the send-subcrq-indirect hcall. The skb alloc cannot be avoided - we must do it now or in the future anyway. The hcall is issued every 16 skbs. If we issue it for <16 skbs it means the traffic is extremely low. No point optimizing for that. Besides the hcalls are not very expensive. There was a lot of testing done in Nov 2020 when the subcrq-indirect hcall support was added. We would need to repeat that testing at the least. Thanks, Sukadev
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index ffb2a91750c7..fae1eaa39dd0 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2435,7 +2435,6 @@ static int ibmvnic_poll(struct napi_struct *napi, int budget) frames_processed = 0; rx_scrq = adapter->rx_scrq[scrq_num]; -restart_poll: while (frames_processed < budget) { struct sk_buff *skb; struct ibmvnic_rx_buff *rx_buff; @@ -2512,20 +2511,12 @@ static int ibmvnic_poll(struct napi_struct *napi, int budget) } if (adapter->state != VNIC_CLOSING && - ((atomic_read(&adapter->rx_pool[scrq_num].available) < - adapter->req_rx_add_entries_per_subcrq / 2) || - frames_processed < budget)) + (atomic_read(&adapter->rx_pool[scrq_num].available) < + adapter->req_rx_add_entries_per_subcrq / 2)) replenish_rx_pool(adapter, &adapter->rx_pool[scrq_num]); if (frames_processed < budget) { - if (napi_complete_done(napi, frames_processed)) { + if (napi_complete_done(napi, frames_processed)) enable_scrq_irq(adapter, rx_scrq); - if (pending_scrq(adapter, rx_scrq)) { - if (napi_reschedule(napi)) { - disable_scrq_irq(adapter, rx_scrq); - goto restart_poll; - } - } - } } return frames_processed; }
The old mechanism replenishes rx pool even only one frames is processed in the poll function, which causes lots of overheads. The old mechanism restarts polling until processed frames reaches the budget, which can cause the poll function to loop into restart_poll 63 times at most and to call replenish_rx_poll 63 times at most. This will cause soft lockup very easily. So, don't replenish too often, and don't goto restart_poll in each poll function. If there are pending descriptors, fetch them in the next poll instance. Signed-off-by: Lijun Pan <lijunp213@gmail.com> --- drivers/net/ethernet/ibm/ibmvnic.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-)