diff mbox series

[net-next,v8,13/15] net: phylink: introduce phylink_fwnode_phy_connect()

Message ID 20210610163917.4138412-14-ciorneiioana@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series ACPI support for dpaa2 driver | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 3 maintainers not CCed: hkallweit1@gmail.com davem@davemloft.net kuba@kernel.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 76 this patch: 76
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 75 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 76 this patch: 76
netdev/header_inline success Link

Commit Message

Ioana Ciornei June 10, 2021, 4:39 p.m. UTC
From: Calvin Johnson <calvin.johnson@oss.nxp.com>

Define phylink_fwnode_phy_connect() to connect phy specified by
a fwnode to a phylink instance.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---

Changes in v8: None
Changes in v7: None
Changes in v6:
- remove OF check for fixed-link

Changes in v5: None
Changes in v4:
- call phy_device_free() before returning

Changes in v3: None
Changes in v2: None

 drivers/net/phy/phylink.c | 54 +++++++++++++++++++++++++++++++++++++++
 include/linux/phylink.h   |  3 +++
 2 files changed, 57 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 96d8e88b4e46..9cc0f69faafe 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -5,6 +5,7 @@ 
  *
  * Copyright (C) 2015 Russell King
  */
+#include <linux/acpi.h>
 #include <linux/ethtool.h>
 #include <linux/export.h>
 #include <linux/gpio/consumer.h>
@@ -1125,6 +1126,59 @@  int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
 }
 EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
 
+/**
+ * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @fwnode: a pointer to a &struct fwnode_handle.
+ * @flags: PHY-specific flags to communicate to the PHY device driver
+ *
+ * Connect the phy specified @fwnode to the phylink instance specified
+ * by @pl.
+ *
+ * Returns 0 on success or a negative errno.
+ */
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags)
+{
+	struct fwnode_handle *phy_fwnode;
+	struct phy_device *phy_dev;
+	int ret;
+
+	/* Fixed links and 802.3z are handled without needing a PHY */
+	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
+	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+	     phy_interface_mode_is_8023z(pl->link_interface)))
+		return 0;
+
+	phy_fwnode = fwnode_get_phy_node(fwnode);
+	if (IS_ERR(phy_fwnode)) {
+		if (pl->cfg_link_an_mode == MLO_AN_PHY)
+			return -ENODEV;
+		return 0;
+	}
+
+	phy_dev = fwnode_phy_find_device(phy_fwnode);
+	/* We're done with the phy_node handle */
+	fwnode_handle_put(phy_fwnode);
+	if (!phy_dev)
+		return -ENODEV;
+
+	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
+				pl->link_interface);
+	if (ret) {
+		phy_device_free(phy_dev);
+		return ret;
+	}
+
+	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
+	if (ret)
+		phy_detach(phy_dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
+
 /**
  * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
  *   instance.
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index fd2acfd9b597..afb3ded0b691 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -441,6 +441,9 @@  void phylink_destroy(struct phylink *);
 
 int phylink_connect_phy(struct phylink *, struct phy_device *);
 int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags);
 void phylink_disconnect_phy(struct phylink *);
 
 void phylink_mac_change(struct phylink *, bool up);