diff mbox series

[v3,net-next,03/13] net: stmmac: reduce indentation when calling stmmac_xpcs_setup

Message ID 20210611200531.2384819-4-olteanv@gmail.com (mailing list archive)
State Accepted
Commit 7413f9a6af00bb4dc0ef01944aceb8e2ee17a8d5
Delegated to: Netdev Maintainers
Headers show
Series Port the SJA1105 DSA driver to XPCS | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 9 of 9 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 16 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Vladimir Oltean June 11, 2021, 8:05 p.m. UTC 
From: Vladimir Oltean <vladimir.oltean@nxp.com>

There is no reason to embed an if within an if, we can just logically
AND the two conditions.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
---
v2->v3: none
v1->v2: none

 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index db97cd4b871d..975b90805359 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7003,12 +7003,10 @@  int stmmac_dvr_probe(struct device *device,
 	if (priv->plat->speed_mode_2500)
 		priv->plat->speed_mode_2500(ndev, priv->plat->bsp_priv);
 
-	if (priv->plat->mdio_bus_data) {
-		if (priv->plat->mdio_bus_data->has_xpcs) {
-			ret = stmmac_xpcs_setup(priv->mii);
-			if (ret)
-				goto error_xpcs_setup;
-		}
+	if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
+		ret = stmmac_xpcs_setup(priv->mii);
+		if (ret)
+			goto error_xpcs_setup;
 	}
 
 	ret = stmmac_phy_setup(priv);