diff mbox series

[net-next,2/2] net: dsa: sja1105: document the SJA1110 in the Kconfig

Message ID 20210624145524.944878-3-olteanv@gmail.com (mailing list archive)
State Accepted
Commit 75e994709f8a7c34ae826731b50ec1a0c4d99404
Delegated to: Netdev Maintainers
Headers show
Series Document the NXP SJA1110 switch as supported | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 20 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Vladimir Oltean June 24, 2021, 2:55 p.m. UTC 
From: Vladimir Oltean <vladimir.oltean@nxp.com>

Mention support for the SJA1110 in menuconfig.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/dsa/sja1105/Kconfig | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/sja1105/Kconfig b/drivers/net/dsa/sja1105/Kconfig
index 8383cd6d2178..b29d41e5e1e7 100644
--- a/drivers/net/dsa/sja1105/Kconfig
+++ b/drivers/net/dsa/sja1105/Kconfig
@@ -7,8 +7,8 @@  tristate "NXP SJA1105 Ethernet switch family support"
 	select PACKING
 	select CRC32
 	help
-	  This is the driver for the NXP SJA1105 automotive Ethernet switch
-	  family. These are 5-port devices and are managed over an SPI
+	  This is the driver for the NXP SJA1105 (5-port) and SJA1110 (10-port)
+	  automotive Ethernet switch family. These are managed over an SPI
 	  interface. Probing is handled based on OF bindings and so is the
 	  linkage to PHYLINK. The driver supports the following revisions:
 	    - SJA1105E (Gen. 1, No TT-Ethernet)
@@ -17,6 +17,10 @@  tristate "NXP SJA1105 Ethernet switch family support"
 	    - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
 	    - SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
 	    - SJA1105S (Gen. 2, SGMII, TT-Ethernet)
+	    - SJA1110A (Gen. 3, SGMII, TT-Ethernet, 100base-TX PHY, 10 ports)
+	    - SJA1110B (Gen. 3, SGMII, TT-Ethernet, 100base-TX PHY, 9 ports)
+	    - SJA1110C (Gen. 3, SGMII, TT-Ethernet, 100base-TX PHY, 7 ports)
+	    - SJA1110D (Gen. 3, SGMII, TT-Ethernet, no 100base-TX PHY, 7 ports)
 
 config NET_DSA_SJA1105_PTP
 	bool "Support for the PTP clock on the NXP SJA1105 Ethernet switch"