diff mbox series

[1/6] dt-bindings: net: can: renesas,rcar-canfd: Document RZ/G2L SoC

Message ID 20210715182123.23372-2-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Renesas RZ/G2L CANFD support | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Prabhakar July 15, 2021, 6:21 p.m. UTC 
Add CANFD binding documentation for Renesas RZ/G2L SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 .../bindings/net/can/renesas,rcar-canfd.yaml  | 45 ++++++++++++++++---
 1 file changed, 39 insertions(+), 6 deletions(-)

Comments

Geert Uytterhoeven July 16, 2021, 7:38 a.m. UTC | #1 
Hi Prabhakar,

On Thu, Jul 15, 2021 at 8:21 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> Add CANFD binding documentation for Renesas RZ/G2L SoC.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>

Thanks for your patch!

> --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
> +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml

> @@ -78,6 +79,38 @@ patternProperties:
>        node.  Each child node supports the "status" property only, which
>        is used to enable/disable the respective channel.
>
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - renesas,rzg2l-canfd
> +then:
> +  properties:
> +    interrupts:
> +      items:
> +        - description: CAN global error interrupt
> +        - description: CAN receive FIFO interrupt
> +        - description: CAN0 error interrupt
> +        - description: CAN0 transmit interrupt
> +        - description: CAN0 transmit/receive FIFO receive completion interrupt
> +        - description: CAN1 error interrupt
> +        - description: CAN1 transmit interrupt
> +        - description: CAN1 transmit/receive FIFO receive completion interrupt

Does it make sense to add interrupt-names?

> +
> +    resets:
> +      maxItems: 2

Same here, for reset-names?
Or a list of descriptions, so we know which reset serves what purpose.

> +
> +else:
> +  properties:
> +    interrupts:
> +      items:
> +        - description: Channel interrupt
> +        - description: Global interrupt
> +
> +    resets:
> +      maxItems: 1
> +
>  required:
>    - compatible
>    - reg

The rest looks good to me.

Gr{oetje,eeting}s,

                        Geert
Lad, Prabhakar July 16, 2021, 8:30 a.m. UTC | #2 
Hi Geert,

Thank you for the review.

On Fri, Jul 16, 2021 at 8:38 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Thu, Jul 15, 2021 at 8:21 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > Add CANFD binding documentation for Renesas RZ/G2L SoC.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
>
> Thanks for your patch!
>
> > --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
> > +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
>
> > @@ -78,6 +79,38 @@ patternProperties:
> >        node.  Each child node supports the "status" property only, which
> >        is used to enable/disable the respective channel.
> >
> > +if:
> > +  properties:
> > +    compatible:
> > +      contains:
> > +        enum:
> > +          - renesas,rzg2l-canfd
> > +then:
> > +  properties:
> > +    interrupts:
> > +      items:
> > +        - description: CAN global error interrupt
> > +        - description: CAN receive FIFO interrupt
> > +        - description: CAN0 error interrupt
> > +        - description: CAN0 transmit interrupt
> > +        - description: CAN0 transmit/receive FIFO receive completion interrupt
> > +        - description: CAN1 error interrupt
> > +        - description: CAN1 transmit interrupt
> > +        - description: CAN1 transmit/receive FIFO receive completion interrupt
>
> Does it make sense to add interrupt-names?
>
Agreed will drop this and add interrupt-names instead. Also I will
update the driver to pick up the interrupts based on names.

> > +
> > +    resets:
> > +      maxItems: 2
>
> Same here, for reset-names?
> Or a list of descriptions, so we know which reset serves what purpose.
>
OK I'll  add the reset-names.

Cheers,
Prabhakar

> > +
> > +else:
> > +  properties:
> > +    interrupts:
> > +      items:
> > +        - description: Channel interrupt
> > +        - description: Global interrupt
> > +
> > +    resets:
> > +      maxItems: 1
> > +
> >  required:
> >    - compatible
> >    - reg
>
> The rest looks good to me.
>
> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
index 0b33ba9ccb47..38243c261622 100644
--- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
+++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
@@ -30,13 +30,15 @@  properties:
               - renesas,r8a77995-canfd     # R-Car D3
           - const: renesas,rcar-gen3-canfd # R-Car Gen3 and RZ/G2
 
+      - items:
+          - enum:
+              - renesas,r9a07g044-canfd    # RZ/G2{L,LC}
+          - const: renesas,rzg2l-canfd     # RZ/G2L family
+
   reg:
     maxItems: 1
 
-  interrupts:
-    items:
-      - description: Channel interrupt
-      - description: Global interrupt
+  interrupts: true
 
   clocks:
     maxItems: 3
@@ -50,8 +52,7 @@  properties:
   power-domains:
     maxItems: 1
 
-  resets:
-    maxItems: 1
+  resets: true
 
   renesas,no-can-fd:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -78,6 +79,38 @@  patternProperties:
       node.  Each child node supports the "status" property only, which
       is used to enable/disable the respective channel.
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rzg2l-canfd
+then:
+  properties:
+    interrupts:
+      items:
+        - description: CAN global error interrupt
+        - description: CAN receive FIFO interrupt
+        - description: CAN0 error interrupt
+        - description: CAN0 transmit interrupt
+        - description: CAN0 transmit/receive FIFO receive completion interrupt
+        - description: CAN1 error interrupt
+        - description: CAN1 transmit interrupt
+        - description: CAN1 transmit/receive FIFO receive completion interrupt
+
+    resets:
+      maxItems: 2
+
+else:
+  properties:
+    interrupts:
+      items:
+        - description: Channel interrupt
+        - description: Global interrupt
+
+    resets:
+      maxItems: 1
+
 required:
   - compatible
   - reg