diff mbox series

linux-next: manual merge of the mhi tree with the net-next tree

Message ID 20210716133738.0d163701@canb.auug.org.au (mailing list archive)
State Not Applicable
Headers show
Series linux-next: manual merge of the mhi tree with the net-next tree | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Stephen Rothwell July 16, 2021, 3:37 a.m. UTC
Hi all,

Today's linux-next merge of the mhi tree got a conflict in:

  drivers/bus/mhi/pci_generic.c

between commit:

  5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")

from the net-next tree and commit:

  156ffb7fb7eb ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")

from the mhi tree.

I fixed it up (see below) and can carry the fix as necessary. This
is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging.  You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.

Comments

Stephen Rothwell July 16, 2021, 3:42 a.m. UTC | #1
Hi all,

On Fri, 16 Jul 2021 13:37:38 +1000 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> @@@ -254,7 -256,7 +258,8 @@@ static const struct mhi_pci_dev_info mh
>   	.config = &modem_qcom_v1_mhiv_config,
>   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
>   	.dma_data_width = 32,
>  +	.mru_default = 32768
> + 	.sideband_wake = false,
>   };

I added the missing ',' after the mru_default line above.
Manivannan Sadhasivam July 16, 2021, 3:46 a.m. UTC | #2
Hi Stephen,

On Fri, Jul 16, 2021 at 01:37:38PM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> Today's linux-next merge of the mhi tree got a conflict in:
> 
>   drivers/bus/mhi/pci_generic.c
> 
> between commit:
> 
>   5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
> 

Ah, this one was never submitted to "linux-arm-msm" mailing list nor to
me. I'm surprised that networking maintainers merged this patch without
getting an Ack from me as it touches MHI bus :/

> from the net-next tree and commit:
> 
>   156ffb7fb7eb ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
> 
> from the mhi tree.
> 
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging.  You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
> 

This change should've been taken via immutable branch between mhi-next
and net-next or via mhi tree. Because, we have more changes coming in for
pci-generic driver in MHI tree.

Dave, since this patch is in your tree, what do you suggest?

Thanks,
Mani

> -- 
> Cheers,
> Stephen Rothwell
> 
> diff --cc drivers/bus/mhi/pci_generic.c
> index 19413daa0917,8bc6149249e3..000000000000
> --- a/drivers/bus/mhi/pci_generic.c
> +++ b/drivers/bus/mhi/pci_generic.c
> @@@ -32,7 -32,8 +32,9 @@@
>    * @edl: emergency download mode firmware path (if any)
>    * @bar_num: PCI base address register to use for MHI MMIO register space
>    * @dma_data_width: DMA transfer word size (32 or 64 bits)
>  + * @mru_default: default MRU size for MBIM network packets
> +  * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
> +  *		   of inband wake support (such as sdx24)
>    */
>   struct mhi_pci_dev_info {
>   	const struct mhi_controller_config *config;
> @@@ -41,7 -42,7 +43,8 @@@
>   	const char *edl;
>   	unsigned int bar_num;
>   	unsigned int dma_data_width;
>  +	unsigned int mru_default;
> + 	bool sideband_wake;
>   };
>   
>   #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
> @@@ -254,7 -256,7 +258,8 @@@ static const struct mhi_pci_dev_info mh
>   	.config = &modem_qcom_v1_mhiv_config,
>   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
>   	.dma_data_width = 32,
>  +	.mru_default = 32768
> + 	.sideband_wake = false,
>   };
>   
>   static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
> @@@ -643,11 -686,13 +689,14 @@@ static int mhi_pci_probe(struct pci_de
>   	mhi_cntrl->status_cb = mhi_pci_status_cb;
>   	mhi_cntrl->runtime_get = mhi_pci_runtime_get;
>   	mhi_cntrl->runtime_put = mhi_pci_runtime_put;
> - 	mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> - 	mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> - 	mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
>  +	mhi_cntrl->mru = info->mru_default;
>   
> + 	if (info->sideband_wake) {
> + 		mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> + 		mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> + 		mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> + 	}
> + 
>   	err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
>   	if (err)
>   		return err;
Manivannan Sadhasivam July 16, 2021, 4:04 a.m. UTC | #3
On Fri, Jul 16, 2021 at 09:16:22AM +0530, Manivannan Sadhasivam wrote:
> Hi Stephen,
> 
> On Fri, Jul 16, 2021 at 01:37:38PM +1000, Stephen Rothwell wrote:
> > Hi all,
> > 
> > Today's linux-next merge of the mhi tree got a conflict in:
> > 
> >   drivers/bus/mhi/pci_generic.c
> > 
> > between commit:
> > 
> >   5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
> > 
> 
> Ah, this one was never submitted to "linux-arm-msm" mailing list nor to
> me. I'm surprised that networking maintainers merged this patch without
> getting an Ack from me as it touches MHI bus :/
> 
> > from the net-next tree and commit:
> > 
> >   156ffb7fb7eb ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
> > 
> > from the mhi tree.
> > 
> > I fixed it up (see below) and can carry the fix as necessary. This
> > is now fixed as far as linux-next is concerned, but any non trivial
> > conflicts should be mentioned to your upstream maintainer when your tree
> > is submitted for merging.  You may also want to consider cooperating
> > with the maintainer of the conflicting tree to minimise any particularly
> > complex conflicts.
> > 
> 
> This change should've been taken via immutable branch between mhi-next
> and net-next or via mhi tree. Because, we have more changes coming in for
> pci-generic driver in MHI tree.
> 
> Dave, since this patch is in your tree, what do you suggest?
> 

Btw, I do have a comment about the patch. So it shouldn't be merged as
it is.

Thanks,
Mani

> Thanks,
> Mani
> 
> > -- 
> > Cheers,
> > Stephen Rothwell
> > 
> > diff --cc drivers/bus/mhi/pci_generic.c
> > index 19413daa0917,8bc6149249e3..000000000000
> > --- a/drivers/bus/mhi/pci_generic.c
> > +++ b/drivers/bus/mhi/pci_generic.c
> > @@@ -32,7 -32,8 +32,9 @@@
> >    * @edl: emergency download mode firmware path (if any)
> >    * @bar_num: PCI base address register to use for MHI MMIO register space
> >    * @dma_data_width: DMA transfer word size (32 or 64 bits)
> >  + * @mru_default: default MRU size for MBIM network packets
> > +  * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
> > +  *		   of inband wake support (such as sdx24)
> >    */
> >   struct mhi_pci_dev_info {
> >   	const struct mhi_controller_config *config;
> > @@@ -41,7 -42,7 +43,8 @@@
> >   	const char *edl;
> >   	unsigned int bar_num;
> >   	unsigned int dma_data_width;
> >  +	unsigned int mru_default;
> > + 	bool sideband_wake;
> >   };
> >   
> >   #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
> > @@@ -254,7 -256,7 +258,8 @@@ static const struct mhi_pci_dev_info mh
> >   	.config = &modem_qcom_v1_mhiv_config,
> >   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> >   	.dma_data_width = 32,
> >  +	.mru_default = 32768
> > + 	.sideband_wake = false,
> >   };
> >   
> >   static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
> > @@@ -643,11 -686,13 +689,14 @@@ static int mhi_pci_probe(struct pci_de
> >   	mhi_cntrl->status_cb = mhi_pci_status_cb;
> >   	mhi_cntrl->runtime_get = mhi_pci_runtime_get;
> >   	mhi_cntrl->runtime_put = mhi_pci_runtime_put;
> > - 	mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> > - 	mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> > - 	mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> >  +	mhi_cntrl->mru = info->mru_default;
> >   
> > + 	if (info->sideband_wake) {
> > + 		mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> > + 		mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> > + 		mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> > + 	}
> > + 
> >   	err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
> >   	if (err)
> >   		return err;
> 
>
Stephen Rothwell July 22, 2021, 4:33 a.m. UTC | #4
Hi all,

On Fri, 16 Jul 2021 13:37:38 +1000 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Today's linux-next merge of the mhi tree got a conflict in:
> 
>   drivers/bus/mhi/pci_generic.c
> 
> between commit:
> 
>   5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
> 
> from the net-next tree and commit:
> 
>   156ffb7fb7eb ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
> 
> from the mhi tree.
> 
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging.  You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
> 
> 
> diff --cc drivers/bus/mhi/pci_generic.c
> index 19413daa0917,8bc6149249e3..000000000000
> --- a/drivers/bus/mhi/pci_generic.c
> +++ b/drivers/bus/mhi/pci_generic.c
> @@@ -32,7 -32,8 +32,9 @@@
>    * @edl: emergency download mode firmware path (if any)
>    * @bar_num: PCI base address register to use for MHI MMIO register space
>    * @dma_data_width: DMA transfer word size (32 or 64 bits)
>  + * @mru_default: default MRU size for MBIM network packets
> +  * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
> +  *		   of inband wake support (such as sdx24)
>    */
>   struct mhi_pci_dev_info {
>   	const struct mhi_controller_config *config;
> @@@ -41,7 -42,7 +43,8 @@@
>   	const char *edl;
>   	unsigned int bar_num;
>   	unsigned int dma_data_width;
>  +	unsigned int mru_default;
> + 	bool sideband_wake;
>   };
>   
>   #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
> @@@ -254,7 -256,7 +258,8 @@@ static const struct mhi_pci_dev_info mh
>   	.config = &modem_qcom_v1_mhiv_config,
>   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
>   	.dma_data_width = 32,
>  +	.mru_default = 32768
> + 	.sideband_wake = false,
>   };
>   
>   static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
> @@@ -643,11 -686,13 +689,14 @@@ static int mhi_pci_probe(struct pci_de
>   	mhi_cntrl->status_cb = mhi_pci_status_cb;
>   	mhi_cntrl->runtime_get = mhi_pci_runtime_get;
>   	mhi_cntrl->runtime_put = mhi_pci_runtime_put;
> - 	mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> - 	mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> - 	mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
>  +	mhi_cntrl->mru = info->mru_default;
>   
> + 	if (info->sideband_wake) {
> + 		mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> + 		mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> + 		mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> + 	}
> + 
>   	err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
>   	if (err)
>   		return err;

This is now a conflict between the char-misc.current tree (where commit
156ffb7fb7eb is now 56f6f4c4eb2a) and the net-next tree.
Manivannan Sadhasivam July 22, 2021, 8:34 a.m. UTC | #5
On Thu, Jul 22, 2021 at 02:33:06PM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> On Fri, 16 Jul 2021 13:37:38 +1000 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> >
> > Today's linux-next merge of the mhi tree got a conflict in:
> > 
> >   drivers/bus/mhi/pci_generic.c
> > 
> > between commit:
> > 
> >   5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
> > 
> > from the net-next tree and commit:
> > 
> >   156ffb7fb7eb ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
> > 
> > from the mhi tree.
> > 
> > I fixed it up (see below) and can carry the fix as necessary. This
> > is now fixed as far as linux-next is concerned, but any non trivial
> > conflicts should be mentioned to your upstream maintainer when your tree
> > is submitted for merging.  You may also want to consider cooperating
> > with the maintainer of the conflicting tree to minimise any particularly
> > complex conflicts.
> > 
> > 
> > diff --cc drivers/bus/mhi/pci_generic.c
> > index 19413daa0917,8bc6149249e3..000000000000
> > --- a/drivers/bus/mhi/pci_generic.c
> > +++ b/drivers/bus/mhi/pci_generic.c
> > @@@ -32,7 -32,8 +32,9 @@@
> >    * @edl: emergency download mode firmware path (if any)
> >    * @bar_num: PCI base address register to use for MHI MMIO register space
> >    * @dma_data_width: DMA transfer word size (32 or 64 bits)
> >  + * @mru_default: default MRU size for MBIM network packets
> > +  * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
> > +  *		   of inband wake support (such as sdx24)
> >    */
> >   struct mhi_pci_dev_info {
> >   	const struct mhi_controller_config *config;
> > @@@ -41,7 -42,7 +43,8 @@@
> >   	const char *edl;
> >   	unsigned int bar_num;
> >   	unsigned int dma_data_width;
> >  +	unsigned int mru_default;
> > + 	bool sideband_wake;
> >   };
> >   
> >   #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
> > @@@ -254,7 -256,7 +258,8 @@@ static const struct mhi_pci_dev_info mh
> >   	.config = &modem_qcom_v1_mhiv_config,
> >   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> >   	.dma_data_width = 32,
> >  +	.mru_default = 32768
> > + 	.sideband_wake = false,
> >   };
> >   
> >   static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
> > @@@ -643,11 -686,13 +689,14 @@@ static int mhi_pci_probe(struct pci_de
> >   	mhi_cntrl->status_cb = mhi_pci_status_cb;
> >   	mhi_cntrl->runtime_get = mhi_pci_runtime_get;
> >   	mhi_cntrl->runtime_put = mhi_pci_runtime_put;
> > - 	mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> > - 	mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> > - 	mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> >  +	mhi_cntrl->mru = info->mru_default;
> >   
> > + 	if (info->sideband_wake) {
> > + 		mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> > + 		mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> > + 		mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> > + 	}
> > + 
> >   	err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
> >   	if (err)
> >   		return err;
> 
> This is now a conflict between the char-misc.current tree (where commit
> 156ffb7fb7eb is now 56f6f4c4eb2a) and the net-next tree.

Yes, this is expected as I said before.

Dave, please consider dropping/reverting the patch. The MHI patch should
go through char-misc tree.

Thanks,
Mani
> 
> -- 
> Cheers,
> Stephen Rothwell
diff mbox series

Patch

diff --cc drivers/bus/mhi/pci_generic.c
index 19413daa0917,8bc6149249e3..000000000000
--- a/drivers/bus/mhi/pci_generic.c