| Message ID | 20210722072338.16083-1-o.rempel@pengutronix.de (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | fdc362bff9132e2e15e75d1ac830f91d2d9dee41 |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net-next,v1,1/1] net: usb: asix: ax88772: do not poll for PHY before registering it | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | success | Link |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Clearly marked for net-next |
| netdev/subject_prefix | success | Link |
| netdev/cc_maintainers | warning | 4 maintainers not CCed: linux@rempel-privat.de colin.king@canonical.com oneukum@suse.com grundler@chromium.org |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 17 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
| netdev/header_inline | success | Link |
Hello: This patch was applied to netdev/net-next.git (refs/heads/master): On Thu, 22 Jul 2021 09:23:38 +0200 you wrote: > asix_get_phyid() is used for two reasons here. To print debug message > with the PHY ID and to wait until the PHY is powered up. > > After migrating to the phylib, we can read PHYID from sysfs. If polling > for the PHY is really needed, then we will need to handle it in the > phylib as well. > > [...] Here is the summary with links: - [net-next,v1,1/1] net: usb: asix: ax88772: do not poll for PHY before registering it https://git.kernel.org/netdev/net-next/c/fdc362bff913 You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 2c115216420a..049c20342a0b 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -714,7 +714,6 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) u8 buf[ETH_ALEN] = {0}, chipcode = 0; struct asix_common_private *priv; int ret, i; - u32 phyid; usbnet_get_endpoints(dev, intf); @@ -762,10 +761,6 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) return ret; } - /* Read PHYID register *AFTER* the PHY was reset properly */ - phyid = asix_get_phyid(dev); - netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid); - /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ if (dev->driver_info->flags & FLAG_FRAMING_AX) { /* hard_mtu is still the default - the device does not support
asix_get_phyid() is used for two reasons here. To print debug message with the PHY ID and to wait until the PHY is powered up. After migrating to the phylib, we can read PHYID from sysfs. If polling for the PHY is really needed, then we will need to handle it in the phylib as well. This change was tested with: - ax88772a + internal PHY - ax88772b + external PHY Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- drivers/net/usb/asix_devices.c | 5 ----- 1 file changed, 5 deletions(-)