diff mbox series

[net-next,2/2] stmmac: intel: Enable 2.5Gbps on Intel AlderLake-S

Message ID 20210809102229.933748-3-vee.khee.wong@linux.intel.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series Intel AlderLake-S 2.5Gbps link speed support | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 9 of 9 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 16 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Wong Vee Khee Aug. 9, 2021, 10:22 a.m. UTC
From: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>

Intel AlderLake-S platform is capable of 2.5Gbps link speed.

This patch enables the 2.5Gbps link speed by adding the callback
function in the AlderLake-S PCI info struct.

Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 8e8778cfbbad..c1db7e53e78f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -770,6 +770,8 @@  static int adls_sgmii_phy0_data(struct pci_dev *pdev,
 {
 	plat->bus_id = 1;
 	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+	plat->speed_mode_2500 = intel_speed_mode_2500;
+	plat->skip_xpcs_soft_reset = 1;
 
 	/* SerDes power up and power down are done in BIOS for ADL */
 
@@ -785,6 +787,8 @@  static int adls_sgmii_phy1_data(struct pci_dev *pdev,
 {
 	plat->bus_id = 2;
 	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+	plat->speed_mode_2500 = intel_speed_mode_2500;
+	plat->skip_xpcs_soft_reset = 1;
 
 	/* SerDes power up and power down are done in BIOS for ADL */